From Fedora Project Wiki

(Added a little information about 532h model)
(Added category)
 
(15 intermediate revisions by 9 users not shown)
Line 6: Line 6:
==What doesn't yet work (and workarounds)==
==What doesn't yet work (and workarounds)==


=== F16 ===
* AO722
** Hangs on startup (also affects windows sometimes)
*** Make "Network Boot : Atheros Boot Agent" first in Boot priority order in BIOS
** Wireless broadcom4313 doesn't work.
*** Download 3 rpms: kmod-wl, kmod-wl-3.1.0-7, and broadcom-wl from any computer with net access from any fedora repository, install them and restart. (Eg: [[http://mirror.liberty.edu/pub/rpmfusion/nonfree/fedora/releases/16/Everything/i386/os/]], replace i386 with x86_64 as required). More details here: http://forums.fedoraforum.org/showthread.php?t=273192
*** OR Replace firmware here [[http://linuxwireless.org/en/users/Drivers/brcm80211]]
** Beep when power unplugged. Update/install alsamixer when mute it within it. It lowers to been to a decent level.
** Mic doesn't work
**# Add <code>load-module module-alsa-source device=hw:1,0,0</code> to /etc/pulse/default.pa before the line <code>.ifexists module-udev-detect.so</code>
**# Restart system.
**# Open alsamixer, make sure Internal Mic and Capture are toggled on and that both Mic Boost and Capture have high volumes.
*** (At any point of time to find out what pulseaudio is doing use <code>paman</code>.)
*** More details here: http://forums.fedoraforum.org/showthread.php?t=277474 . Bug report here: https://bugzilla.redhat.com/show_bug.cgi?id=802316
=== F14 ===
* All models: 
** Unknown
* AO532h
** 32 and 64-bit Install fine out of the box, graphics, wired/wireless networking all working
** battery life seems to be 5-7 hrs. with the 6cell ~40Wh battery out of the box. Flashblock + a good tuned profile might add an hour.
*** Missing battery issue, fixed with '''cat /proc/acpi/battery/BAT1/state''', sometimes shows up after resume from suspend.
*** I've hit the following BZ's (not necessarily specific to this machine):
*** https://bugzilla.redhat.com/show_bug.cgi?id=554177
*** suspend to ram (by closing lid) usually works only once or twice, might be related to 554177
* D250, A150, AO751h ...:
** AO751h-52Bk all works ok and graphic card(must enable RPMFusion yum install xorg-x11-drv-psb or from system->administration->add/Remove Software find from xorg-x11-drv-psb )
** If you don't show the battery status to A0751h, add this line '''cat /proc/acpi/battery/BAT1/state''' in the file /etc/rc.local
** D250: Wireless may get knocked out with some software versions, but if you use wired Internet to update to kernel-2.6.35.9-64.fc14.i686 and kmod-wl-5.60.48.36-2.fc14.3.i686 (and dependencies) from RPM Fusion, wireless will work again for you.
* A110 (8GB):
** everything works (but I haven't tried suspend/hibernate)
* AOD255
** Install works and appears to detect most hardware. Have encountered issues with the microphone built into the screen, attaching an external microphone works. Webcam, graphics, wireless all work without further modification.
** Found that third party application Google Talk attempts to use Open GL extensions which are not supported by the graphics card, or at least the current drivers, of this netbook and crashes as a result. Running `echo "LIBGL_ALWAYS_SOFTWARE=1" > /opt/google/talkplugin/envvars` as root tells Google Talk to use software rendering to avoid this for now but results in a performance hit.


=== F13 ===
=== F13 ===
Line 13: Line 47:
** Card reader (UBS ID 0cf2:6250 ENE Technology, Inc.) does not appear to work.
** Card reader (UBS ID 0cf2:6250 ENE Technology, Inc.) does not appear to work.
* D250, A150, AO751h ...:
* D250, A150, AO751h ...:
** AO751h-52Bk all works ok but graphic card working 2D and 1366X768
** AO751h-52Bk all works ok and graphic card(must enable RPMFusion yum install xorg-x11-drv-psb or from system->administration->add/Remove Software find from xorg-x11-drv-psb )
** If you don't show the battery status to A0751h, add this line '''cat /proc/acpi/battery/BAT1/state''' in the file /etc/rc.local
** If you don't show the battery status to A0751h, add this line '''cat /proc/acpi/battery/BAT1/state''' in the file /etc/rc.local
(Poulsbo Gma500 http://download1.rpmfusion.org/nonfree/fedora/updates/testing/13/SRPMS/xorg-x11-drv-psb-0.32.0-3.fc13.src.rpm  or enable rpmfusion-testing and yum install xorg-x11-drv-psb )
* A110 (8GB):
* A110 (8GB):
** Everything works except suspend.
** Everything works except suspend.
Line 44: Line 77:
* For the original AAO model A110:
* For the original AAO model A110:
** Everything else works
** Everything else works
* For the AO751h model:
** Intel [http://edc.intel.com/Software/Downloads/EMGD/ EMGD] driver for Video GMA500.
* Other models, including the more recent AAO A150 / D150:
* Other models, including the more recent AAO A150 / D150:
** Cheese Webcam Booth detected camera, then didn't for a while and now it's back, but the picture is washed out and there's no controls to adjust it.
** Cheese Webcam Booth detected camera, then didn't for a while and now it's back, but the picture is washed out and there's no controls to adjust it.
Line 61: Line 96:
* Regular install, except via external USB CD/DVD drive, or using a specially setup 4GB+ usbkey.
* Regular install, except via external USB CD/DVD drive, or using a specially setup 4GB+ usbkey.


* Problem booting F13 DVD
Cannot boot F13 DVD via a working usb CD/DVD drive. Worked well with the Live CD
Aspire One Model: ZG5
Error: isolinux: disk error 80, AX = 4226, drive 90


==Miscellaneous setup==
==Miscellaneous setup==
Line 338: Line 379:
echo "blacklist jmb38x_ms" > /etc/modprobe.d/blacklist-msreader
echo "blacklist jmb38x_ms" > /etc/modprobe.d/blacklist-msreader
</pre>
</pre>
[[Category: Documentation]]

Latest revision as of 04:49, 16 November 2013

This page is about installing and configuring Fedora on the Acer Aspire One netbook. Please contribute if you can.

Note that there a wide variety of netbooks marketed under the Aspire One line, with a variety of hardware.

What doesn't yet work (and workarounds)

F16

  • AO722
    • Hangs on startup (also affects windows sometimes)
      • Make "Network Boot : Atheros Boot Agent" first in Boot priority order in BIOS
    • Wireless broadcom4313 doesn't work.
      • Download 3 rpms: kmod-wl, kmod-wl-3.1.0-7, and broadcom-wl from any computer with net access from any fedora repository, install them and restart. (Eg: [[1]], replace i386 with x86_64 as required). More details here: http://forums.fedoraforum.org/showthread.php?t=273192
      • OR Replace firmware here [[2]]
    • Beep when power unplugged. Update/install alsamixer when mute it within it. It lowers to been to a decent level.
    • Mic doesn't work
      1. Add load-module module-alsa-source device=hw:1,0,0 to /etc/pulse/default.pa before the line .ifexists module-udev-detect.so
      2. Restart system.
      3. Open alsamixer, make sure Internal Mic and Capture are toggled on and that both Mic Boost and Capture have high volumes.

F14

  • All models:
    • Unknown
  • AO532h
    • 32 and 64-bit Install fine out of the box, graphics, wired/wireless networking all working
    • battery life seems to be 5-7 hrs. with the 6cell ~40Wh battery out of the box. Flashblock + a good tuned profile might add an hour.
      • Missing battery issue, fixed with cat /proc/acpi/battery/BAT1/state, sometimes shows up after resume from suspend.
      • I've hit the following BZ's (not necessarily specific to this machine):
      • https://bugzilla.redhat.com/show_bug.cgi?id=554177
      • suspend to ram (by closing lid) usually works only once or twice, might be related to 554177
  • D250, A150, AO751h ...:
    • AO751h-52Bk all works ok and graphic card(must enable RPMFusion yum install xorg-x11-drv-psb or from system->administration->add/Remove Software find from xorg-x11-drv-psb )
    • If you don't show the battery status to A0751h, add this line cat /proc/acpi/battery/BAT1/state in the file /etc/rc.local
    • D250: Wireless may get knocked out with some software versions, but if you use wired Internet to update to kernel-2.6.35.9-64.fc14.i686 and kmod-wl-5.60.48.36-2.fc14.3.i686 (and dependencies) from RPM Fusion, wireless will work again for you.
  • A110 (8GB):
    • everything works (but I haven't tried suspend/hibernate)
  • AOD255
    • Install works and appears to detect most hardware. Have encountered issues with the microphone built into the screen, attaching an external microphone works. Webcam, graphics, wireless all work without further modification.
    • Found that third party application Google Talk attempts to use Open GL extensions which are not supported by the graphics card, or at least the current drivers, of this netbook and crashes as a result. Running echo "LIBGL_ALWAYS_SOFTWARE=1" > /opt/google/talkplugin/envvars as root tells Google Talk to use software rendering to avoid this for now but results in a performance hit.

F13

  • All models:
    • Unknown
  • AO532h
    • Card reader (UBS ID 0cf2:6250 ENE Technology, Inc.) does not appear to work.
  • D250, A150, AO751h ...:
    • AO751h-52Bk all works ok and graphic card(must enable RPMFusion yum install xorg-x11-drv-psb or from system->administration->add/Remove Software find from xorg-x11-drv-psb )
    • If you don't show the battery status to A0751h, add this line cat /proc/acpi/battery/BAT1/state in the file /etc/rc.local
  • A110 (8GB):
    • Everything works except suspend.

F12

(Tested with a D250 and partially with AO751h.)

  • If using a Live .iso, you must supply ssb.blacklist=1 as a boot parameter to avoid a hang. (Hit any key to avoid automatic boot, then Tab from the menu to change boot options. When you see the command line, type a space followed by the new parameter.) When rebooting after the initial installation, you will need to add the same parameter to the boot options from the Grub menu. If you are not presented with this menu automatically, try hitting Esc repeatedly during startup.
  • Depending on the exact hardware, your hard-wired network interface might not be detected. If this is the case, you cannot easily perform a network installation using a netinst.iso or boot.iso, because neither the hard-wired nor wireless network devices will be available. Use the Live or DVD install method, or create a driver disk.
  • If you are using the full DVD, multi-CD, or netinst.iso install methods, you will need to supply either ssb.blacklist=1 or noprobe as a boot option in order to avoid a hang.
  • After installation (or during installation, if you have network access) enable RPM Fusion repositories and install the kmod-wl driver. After rebooting, this will automatically add the ssb module to the blacklist, and also give you working wireless. If you are transferring files on removable media because you have no working network, be sure to also copy broadcom-wl, which is a required dependency. After these RPMs are installed, you will no longer need to add parameters at boot time.
  • If you don't show the battery status, add this line cat /proc/acpi/battery/BAT1/state in the file /etc/rc.local (AO751h).
  • AO532h (LXDE F12 Install)

OOTB multi-touchpad functionality fails, instead of synaptics, emulated mac mouse drivers are used

SDCard Reader not working yet.

  • A110 (8GB)

Everything seems to work just fine (with no special tuning at all) The WLAN stops working (usually after the netbook was suspended, see: https://bugzilla.redhat.com/show_bug.cgi?id=578607

F11

  • All models:
    • Touchpad vertical scrolling does not work out-of-the-box with new synaptics
    • Sensors not detected by lm_sensors 'sensors-detect' or by the 'acpi' util. (netbook many not have any hardware sensors)
  • For the original AAO model A110:
    • Everything else works
  • For the AO751h model:
    • Intel EMGD driver for Video GMA500.
  • Other models, including the more recent AAO A150 / D150:
    • Cheese Webcam Booth detected camera, then didn't for a while and now it's back, but the picture is washed out and there's no controls to adjust it.
    • Speakers do not auto-mute when using headphones until editing /etc/modprobe.d/modprobe.conf.

Installation

You can install Fedora by using an external USB CD/DVD reader, a USB dongle, or via PXE netboot.

Live CD/USB

  • No special installation workarounds required since F10.
  • Root partition filesystems cannot be changed:
    • in F12: "/" must be ext4; "/boot" is optional, and may be ext[432]
    • in F11: "/" must be ext4; "/boot" is required, and may be ext[32]
    • in F10: "/" must be ext3; "/boot" is optional, and may be ext[32]

Installation DVD

  • Regular install, except via external USB CD/DVD drive, or using a specially setup 4GB+ usbkey.
  • Problem booting F13 DVD

Cannot boot F13 DVD via a working usb CD/DVD drive. Worked well with the Live CD

Aspire One Model: ZG5

Error: isolinux: disk error 80, AX = 4226, drive 90

Miscellaneous setup

Card Reader

Both card readers work out of the box (if not, see: #Obsolete Instructions). In Fedora 12, the multi-card reader does work with Memory Sticks (at least in the AAO 110L model).

The "special" card reader on the left for adding storage is seen as just another plain card reader. Use LVM if you want to extend storage space from the internal HDD/SSD, but don't try to suspend while using the card reader on the left as corruptions may result. Note that with some models the reader on the right won't work with Memory Sticks.

Touchpad

Tap-to-click is disabled by default. If using GNOME, you can enable it by choosing System > Preferences > Mouse > Enable Tapping. For every other desktop (XFCE, LXDE, fluxbox, KDE, etc), or to have tap2click available at the login manager (gdm), use the following method to enable it:

In F13: To enable tap-to-click, paste the following to /etc/X11/xorg.conf.d/50-synaptics.conf; for a full list of touchpad config options, see: man synaptics.

Section "InputClass"
        Identifier "touchpad catchall"
        MatchIsTouchpad "on"
        Option "TapButton1" "1"
EndSection

Beginning with F13, X uses udev instead of HAL for input device configuration. User customizations go to /etc/X11/xorg.conf.d/*.conf and system defaults are found in /usr/share/X11/xorg.conf.d/*conf

In F12: To enable tap-to-click, paste the following to /etc/hal/fdi/policy/10-synaptics.fdi

<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
  <device>
    <match key="info.capabilities" contains="input.touchpad">
             <merge key="input.x11_options.TapButton1" type="string">1</merge>
             <merge key="input.x11_options.TapButton2" type="string">3</merge>
             <merge key="input.x11_options.TapButton3" type="string">2</merge>
        <merge key="input.x11_driver" type="string">synaptics</merge>
    </match>
  </device>
</deviceinfo>

In F11: To enable tap-to-click, and to fix vertical scrolling, paste the following to /etc/hal/fdi/policy/10-synaptics.fdi

<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
  <device>
    <match key="info.capabilities" contains="input.touchpad">
             <merge key="input.x11_options.TapButton1" type="string">1</merge>
             <merge key="input.x11_options.TapButton2" type="string">3</merge>
             <merge key="input.x11_options.TapButton3" type="string">2</merge>
             <merge key="input.x11_options.VertEdgeScroll" type="string">1</merge>
             <merge key="input.x11_options.LeftEdge" type="string">1700</merge>
             <merge key="input.x11_options.RightEdge" type="string">5300</merge>
             <merge key="input.x11_options.TopEdge" type="string">1700</merge>
             <merge key="input.x11_options.BottomEdge" type="string">4200</merge>
        <merge key="input.x11_driver" type="string">synaptics</merge>
    </match>
  </device>
</deviceinfo>

Save the file, then reboot your system, or logout and back in.

Speakers do not auto-mute when using headphones

In F11, add the following line to /etc/modprobe.d/aceraspirefix.conf and then reboot.

options snd-hda-intel model=acer-aspire

Built-in Camera

Works out of the box. Use the cheese app which is installed by default to test. Other v4l2 webcam-using apps include: vlc, ekiga, ucview, camE, xawtv, zoneminder, and motion.


Notes on performance

If you have the 8 GB SSD/512MB RAM version, the flash performance may not be so good. Linux tries to swap often, and the SSD write speed is too slow (~ 4MB to 7.8MB/sec) to do much swapping. Use a lighter desktop like XFCE or add more RAM (which is not easy; you have to fully disassemble the Aspire One losing the warranty).

The "cheapest" way to get a somewhat sensible storage performance has been for me to add 2 8GB class 6 SDHC cards, and use LVM to create a stripped root volume. 2 benefits: 8GB => 24GB and read/write performance almost doubles, at least in shouting distance to average SATA discs.

Furthermore, instead of "real" swap, I'd really recommend compcache (http://code.google.com/p/compcache/).

If you have upgraded the RAM (1.5GB max) or you don't have a heavy load, it may help to disable swap, as well as to move /tmp, /var/tmp, /var/log, and /var/cache/yum off of the flash and onto tmpfs ramdisk. It may also help to use a journal-less ext2 VS ext3, and to include the "noatime,nodiratime" mount options in /etc/fstab to limit unnecessary writes.

Example /etc/fstab entries:

/dev/sda2    /                ext2     defaults,noatime                   1 1
tmp          /tmp             tmpfs    defaults                           0 0
vartmp       /var/tmp         tmpfs    defaults                           0 0
varcacheyum  /var/cache/yum   tmpfs    defaults                           0 0

Note: if installing F11 or F12 from liveusb, your root '/' filesystem will always be ext4 (f10 and previous was ext3). The benefits of ext2 is debatable, as the tiny performance increase is more than offset by long fsck's after unclean shutdowns.

If you really want to increase performance, use a fast SDHC memory card in the left reader, and use it for /home, /var and /usr.

Misc:

  • On SSD it is tremendously helpful to disable your web browsers' disk cache.
  • Disabling SELinux (/etc/sysconfig/selinux) can buy you a small (~7%) amount of performance, if security isn't a concern. It also decreases boot time by a few seconds.
  • Disabling unnecessary services can almost cut the bootup time in half (18 seconds is doable in F12, as reported by bootchartd). Depending on your requirements for a netbook, it is safe to disable at least: sendmail, atd, nfs*, rpc*, portreserve, live*, avahi-daemon, cups, gpm, ip6tables, bluetooth, lvm2-monitor, mdmonitor, pcscd, and abrtd
chkconfig --list | grep ':on'
cd /etc/init.d
for service in sendmail atd nfs* rpc* portreserve live* avahi-daemon cups gpm ip6tables bluetooth lvm2-monitor mdmonitor pcscd abrtd; do echo disabling $service; chkconfig $service off; done
chkconfig --list | grep ':on'
  • Disable unused virtual terminal consoles:
    • For F13, change the end of the line ACTIVE_CONSOLES=/dev/tty[1-6] in /etc/sysconfig/init, to say [1-2]'
    • For F12 and F11, remove all tty* files from /etc/event.d except tty1 and tty2 (ctrl-alt-[f1-f6] consoles)
mkdir /etc/event.d.disabled
mv /etc/event.d/tty[3-6] /etc/event.d.disabled
  • If GNOME, Disable most auto-started applications from Session and Startup preferences under the Applicaton Autostart tab.
  • If GNOME, Disable Tracker indexer from both Search and Indexing and from Application Autostart.
  • Use XFCE or LXDE instead of the heavier GNOME and KDE desktops.

Some tricks

Add this to /etc/sysctl.conf:

# Economize the SSD
# Strongly discourage swapping (default 60)
vm.swappiness = 1

# Don't shrink the inode cache aggressively (default 100)
vm.vfs_cache_pressure = 50

# (default 499)
vm.dirty_writeback_centisecs = 1500

# (default 10)
vm.dirty_ratio = 20

# (default 5)
vm.dirty_background_ratio = 10

# (default 0)
vm.laptop_mode = 5

Add this to /etc/rc.d/rc.local

# As in the rc.last.ctrl of Linpus
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate_max > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate

echo 1 > /sys/devices/system/cpu/sched_smt_power_savings
echo 10 > /sys/module/snd_hda_intel/parameters/power_save
 
#Decrease power usage of USB while idle
[ -w /sys/bus/usb/devices/1-5/power/level ] && echo auto > /sys/bus/usb/devices/1-5/power/level
[ -w /sys/bus/usb/devices/5-5/power/level ] && echo auto > /sys/bus/usb/devices/5-5/power/level

Edit the file /boot/grub/grub.conf and add elevator=noop to the kernel-line

kernel /vmlinuz-2.6.27.9-159.fc10.i686 ro root=/dev/sda2 rhgb quiet elevator=noop

xorg.conf

A sample xorg.conf that provides a larger virtual screen - also configures my 19" VGA screen when connected...adjust the Screen and Display sections for whatever display you have connected to your VGA port

NOTE: this seems to require xserver 1.6 and xrandr 1.3 which are Fedora 11 and this may not work in earlier versions of Fedora.

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Screen      0  "Screen1" 0 0 
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "catalogue:/etc/X11/fontpath.d"
        FontPath     "built-ins"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "dri"   
        Load  "dri2"  
        Load  "record"
        Load  "glx"   
EndSection            

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"      
        Option      "XkbModel" "pc105+inet"
        Option      "XkbLayout" "us"       
EndSection                                 

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse" 
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"  
EndSection                                    

Section "Monitor"
        Identifier   "LVDS1"
        ModelName    "LCD Panel 1024x768"
        Option       "Panning" "1280x1024"
        Modeline     "1024×600" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +VSync
EndSection                                                                             

Section "Monitor"
        Identifier   "VGA1"
        Modeline     "1280x1024" 108.00  1280 1328 1440 1688  1024 1025 1028 1066 +HSync +VSync
        ModelName    "LCD Panel 1280x1024"                                                     
EndSection                                                                                     

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "intel"
        VendorName  "Intel Corporation"
        BoardName   "Mobile 945GME Express Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "LVDS1"
        SubSection "Display"
                Viewport   0 0
                Modes     "1280x1024" "1024x768" "1024x600"
                Depth     24
                Virtual   1280 1024
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Card0"
        Monitor    "VGA1"
        SubSection "Display"
                Viewport   0 0
                Modes     "1280x1024"
                Depth     24
                Virtual   1280 1024
        EndSubSection
EndSection



Obsolete Instructions

Card Reader

Since F10 the card readers are automatically detected out of the box, but if it's not working for you, you can try:

echo "modprobe pciehp" >> /etc/rc.d/rc.local
echo "modprobe sdhci" >> /etc/rc.d/rc.local
echo "setpci -d 197b:2381 AE=47" >> /etc/rc.d/rc.local
echo "blacklist jmb38x_ms" > /etc/modprobe.d/blacklist-msreader