From Fedora Project Wiki
(Created page with '= How To: Running Fedora-ARM on GuruPlug = == Introduction == The GuruPlug is a development platform, targeted for use as a plug computer, and designed to run network-based soft...')
 
Line 7: Line 7:
* Power: 2.3w idle no attached devices, 7.0w running at 100% CPU utilization
* Power: 2.3w idle no attached devices, 7.0w running at 100% CPU utilization
* CPU:         Marvell Kirkwood 88F6281 ARM Based, 1Ghz - 2Ghz processor
* CPU:         Marvell Kirkwood 88F6281 ARM Based, 1Ghz - 2Ghz processor
* Memory: 512MB SDRAM, 512MB Flash
* Memory: 512MB DDR2 RAM, 512MB Nand Flash
* Display: none
* Display: none
* Connectivity: USB 2.0, SD, Gigabit Network,JTAG mini USB
* I/O:         2xUSB 2.0, 1xMicroSD, 2x Gigabit Ethernet, 1xeSATA 2.0
* Dimensions: 110 x 69.5 x 48.5 (mm)
* Dimensions: 110 x 69.5 x 48.5 (mm)



Revision as of 18:38, 14 October 2010

How To: Running Fedora-ARM on GuruPlug

Introduction

The GuruPlug is a development platform, targeted for use as a plug computer, and designed to run network-based software services. It features a Kirkwood Series SoC with an embedded Marvell Sheeva™ CPU core running at 1.2 GHz. The GuruPlug is the second generation of SheevaPlugs

Technical Specifications

  • Power: 2.3w idle no attached devices, 7.0w running at 100% CPU utilization
  • CPU: Marvell Kirkwood 88F6281 ARM Based, 1Ghz - 2Ghz processor
  • Memory: 512MB DDR2 RAM, 512MB Nand Flash
  • Display: none
  • I/O: 2xUSB 2.0, 1xMicroSD, 2x Gigabit Ethernet, 1xeSATA 2.0
  • Dimensions: 110 x 69.5 x 48.5 (mm)

Setup Kernel Image

You can either simply use a pre-built kernel image or build your own from source.