From Fedora Project Wiki

Upgrading F17 Images to 3.7 Kernel

F17 GA

Starting with the F17 GA image, yum updated 2013-02-14.

kernel-3.7.3-101.fc17

Hardware boot Network Serial USB Display Final Notes
Versatile Express (Qemu) n/a The install failure resulted on a fully updated F17 system. The boot failure occurred on a F17 GA system, there was no install error, but the kernel did not boot (using qemu-system-arm-1.2.2-6.fc18.x86_64). DTB used for boot test (required).
Pandaboard
Pass pass
Pass pass
Pass pass
Pass pass
Trimslice Bare/Value Pro
Pass pass U-Boot 2012.04.01-1.01
Kernel test booted on F18 rootfs successfully. The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb.
Trimslice Pro/H/H250
Highbank
Beagleboard XM
Kirkwood Tested on GuruPlug Server Plus

kernel-3.7.9-101.fc17

Hardware boot Network Serial USB Display Final Notes
Versatile Express (Qemu) Disk Image n/a
Pandaboard SD
Trimslice Bare/Value Pro SD
Trimslice Pro/H/H250
Pass pass
SATA
Pass pass
Pass pass
Pass pass
The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb.
Highbank
Beagleboard XM

kernel-3.5.6-1.fc17

Hardware boot Network Serial USB Display Final Notes
Versatile Express (Qemu) Disk Image n/a Install Failure - qemu-system-arm-1.2.2-6.fc18.x86_64
Pandaboard SD
Trimslice Bare/Value Pro SD
Trimslice Pro/H/H250 SATA
Highbank
Beagleboard XM