Xen Pvops Dom0
to serve as Dom0 for a Xen-based system. Currently Fedora releases greater than 8 contain the Xen hypervisor and tools, but not a Xen Dom0-capable kernel.
- Name: W. Michael Petullo
- Email: email@example.com
- People Involved: Michael Young, Eduardo Habkost, Mark McLoughlin, Stephen Tweedie, Chris Wright, Juan Quintela, Markus Armbruster, Glauber Costa, Daniel Berrange et al.
- Targeted release: Fedora 15
- Last updated: 2010-10-29
- Percentage of completion: 0%
In order to implement this feature, it is necessary to get Xen Dom0 support upstream and in Fedora. In order to support development until this happens, Michael Young has been building third-party Dom0 kernels. He creates a diff between upstream and the xen/stable-2.6.32.x branch and uses it to patch the Fedora 12 kernel package. The reason that he based his work on the Fedora 12 kernel is that newer Fedora versions ship newer kernels, while Xen had continued to target 2.6.32. This has changed recently, as Linus began accepting Dom0 patches from Xen and applying them to the 2.6.37 tree. Presently, the core Dom0 support has been accepted upstream. What remains is the backend driver support that Dom0 provides DomU guests. So, it should be possible to boot an upstream kernel in Dom0, but the resulting system will not be able to host DomU guests.
Xen is a hypervisor-based type-1 virtualization solution. The Xen hypervisor requires a standard operating system that runs in a privileged domain, Dom0. The Dom0 operating system provides driver and guest management support to Xen and other guest operating systems running in the DomU domain. Fedora 8 provided a kernel that could serve as a Dom0 guest. However, newer Fedora releases dropped support for Dom0 (although they can run in DomU). The Xen project is presently pushing the features required for a Dom0 Linux kernel upstream. Once these features are available in the mainline kernel, it follows that Fedora could support Xen Dom0.
Benefit to Fedora
Fedora will benefit from a Xen Dom0-capable kernel. Xen has proven to be a competitive virtualization solution in real-world installations. Xen is different enough from KVM that the two technologies could complement each other within the Fedora Project. There are ongoing benchmarks that intend to define the relative performance of the two technologies.
- Implement Dom0 support in upstream kernel (Xen / Jeremy Fitzhardinge)
- Modify 'grubby' to support GRUB syntax required by Xen (Bugzilla #640486)
- Make 'new-kernel-pkg' aware of Xen using the HYPERVISOR option in /etc/sysconfig/kernel
- Ensure Fedora's virtualization tools support Xen
- Possibly implement support for bridging in NetworkManager
- Possibly implement support in Anaconda
How To Test
- Install a Fedora Dom0 kernel and
- Confirm grub.conf does not boot the new kernel using Xen
- Confirm the Dom0 kernel can boot on bare metal (no Xen)
- Turn on Xen Userspace by running 'chkconfig xend on'
- Turn on Xen Hypervisor by setting 'HYPERVISOR=/boot/xen-X.Y.gz' in /etc/sysconfig/kernel
- Remove and reinstall the Dom0 kernel
- Confirm grub.conf boots the new kernel using Xen
- Observe presence of Xen via /sys/hypervisor/
- Run 'xm list' and observe Domain-0
- Use 'virt-install' to deploy a Fedora paravirtualized guest
- Use 'virt-install' to deploy a Fedora fully virtualized guest
- Use 'virsh' to save & restore guests
- Balloon down memory of a guest with 'virsh'
- Stock Fedora kernel supports both Xen dom0 and bare metal
- All features and hardware supported on bare metal also work on Xen Dom0
- Can enable and disable the use of the Xen hypervisor via a /etc/sysconfig/kernel setting
- Can manage Xen guests using Fedora virtualization tools
There is presently some uncertainty as to when the backend driver support that the Dom0 guest provides DomU guests will be upstream. This may make the 2.6.37 series and therefore Fedora 15 or it may not. Regardless, we will have to touch a lot of subsystems, so it makes sense to start early.
If the Xen drivers don't make Fedora 15, then little is lost. We can continue to test the Dom0 kernel (without support for DomU guests) and work on the supporting infrastructure. It would be useful for our effort to have a working Dom0, grubby, etc in Fedora 15 even if other features (most notably DomU guests) do not make it. In the worst case, we may delay the announcement of the Dom0 feature to Fedora 16, but can include all progress completed in Fedora 15.
- Xen, http://www.xen.org/
- The Xen mailing lists, hosted at xen.org
- The fedora-xen mailing list, hosted by Fedora
- "Dom0 xen support in Fedora 15?" on fedora-xen mailing list, http://lists.fedoraproject.org/pipermail/xen/2010-November/005205.html
- Michael Young's third-party Dom0 kernels, http://fedorapeople.org/~myoung/dom0/
In order to configure a system to boot Michael Young's kernel in Dom0 on a present Fedora system:
1. yum install xen.
2. Install a Dom0 kernel package.
3. Create a grub.conf entry such as the following (note the module syntax):
title Fedora (18.104.22.168-170.1.xendom0.fc12.x86_64) root (hd0,0) kernel /xen-4.0.1.gz module /vmlinuz-22.214.171.124-170.1.xendom0.fc12.x86_64 ro root=/dev/mapper/vg_imp-lv_root_64bit LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet 3 module /initramfs-126.96.36.199-170.1.xendom0.fc12.x86_64.im
4. Configure a bridge device by setting /etc/sysconfig/network-scripts/ifcfg-virbr0:
DEVICE=virbr0 TYPE=Bridge ONBOOT=yes USERCTL=no BOOTPROTO=dhcp NM_CONTROLLED=no
5. Configure eth0 to be a member of the bridge:
DEVICE=eth0 HWADDR=[XX:XX:XX:XX:XX:XX] TYPE=Ethernet ONBOOT=yes USERCTL=no BOOTPROTO=none BRIDGE=virbr0 NM_CONTROLLED=no
6. Reboot and select your Xen kernel in the GRUB boot menu