From Fedora Project Wiki

(Additional Functionality)
(Replaced content with "= OpenStack in EPEL = The OpenStack Folsom was retired from EPEL 6. Please visit [ RDO project] for running OpenStack on EL platforms.")
(26 intermediate revisions by 10 users not shown)
Line 1: Line 1:
= Basic Setup =
= OpenStack in EPEL =
These steps will setup OpenStack nova, glance, and keystone to be accessed by the OpenStack dashboard web UI on a single host, as well as launching our first instance (virtual machine).
The OpenStack Folsom was retired from EPEL 6.
Please visit [ RDO project] for running OpenStack on EL platforms.
Many of the examples here require 'sudo' to be properly configured, please see [[Configuring Sudo]] if you need help.
== Initial Installation ==
$> sudo rpm -Uvh
First let's pull in OpenStack and some optional dependencies:
$> sudo yum --enablerepo=epel-testing install \
openstack-nova openstack-glance openstack-keystone openstack-quantum \
openstack-swift\* openstack-dashboard openstack-utils memcached qpid-cpp-server \
mysql-server avahi
Ensure auth=no is set in /etc/qpidd.conf
Set selinux in permissive mode:
$> sudo setenforce permissive
Otherwise you will get issues like
/usr/bin/nova-dhcpbridge: No such file or directory
if RHEL 6.2 based
  $> sudo openstack-config --set /etc/nova/nova.conf DEFAULT force_dhcp_release False
else if RHEL 6.3 based
  $> sudo yum install dnsmasq-utils  # from the Red Hat '''optional''' channel
Run the helper script to get MySQL configured for use with openstack-nova.  If <code>mysql-server</code> is not already installed, this script will install it for you.
$> sudo openstack-db --init --service nova
Similarly, run the helper script to get MySQL configured for use with openstack-glance.
$> sudo openstack-db --init --service glance
Nova requires the QPID messaging server to be running.
$> sudo service qpidd start && sudo chkconfig qpidd on
Nova requires the libvirtd server to be running:
$> sudo service libvirtd start && sudo chkconfig libvirtd on
Next, you should enable the Glance API and registry services:
$> for svc in api registry; do sudo service openstack-glance-$svc start; sudo chkconfig openstack-glance-$svc on  ; done
The openstack-nova-volume service requires an LVM Volume Group called nova-volumes to exist. We simply create this using a loopback sparse disk image.
$> sudo dd if=/dev/zero of=/var/lib/nova/nova-volumes.img bs=1M seek=20k count=0
$> sudo vgcreate nova-volumes $(sudo losetup --show -f /var/lib/nova/nova-volumes.img)
If you are testing OpenStack in a virtual machine, you need to configure nova to use qemu without KVM and hardware virtualization.
The second command relaxes SELinux rules to allow this mode of operation (
The last 2 commands here work around a libvirt issue fixed in RHEL 6.4.
Note nested virtualization will be the much slower TCG variety, and you should provide lots of memory to the top level guest,
as the openstack created guests default to 2GM RAM with no overcommit.
$> sudo openstack-config --set /etc/nova/nova.conf DEFAULT libvirt_type qemu
$> setsebool -P virt_use_execmem on # This may take a while
$> sudo ln -s /usr/libexec/qemu-kvm /usr/bin/qemu-system-x86_64
$> sudo service libvirtd restart
If you intend to use guest images that don't have a single partition (like the Fedora 16 image linked below),
then allow libguestfs to inspect the image so that files can be injected, by setting:
$> sudo openstack-config --set /etc/nova/nova.conf DEFAULT libvirt_inject_partition -1
Now you can start the various services:
$> for svc in api objectstore compute network volume scheduler cert; do sudo service openstack-nova-$svc start ; sudo chkconfig openstack-nova-$svc on ;  done
Check that all the services started up correctly and look in the logs in <code>/var/log/nova</code> for errors. If there are none, then Nova is up and running!
== Initial Keystone setup ==
Keystone is the openstack identity service, providing a central place to
set up openstack users, groups, and accounts that can be shared across all
other services. This deprecates the old style user accounts manually set
up with nova-manage.
Setting up keystone is required for using the Openstack dashboard.
* Configure the Keystone database, similar to how we do it for nova
$> sudo openstack-db --init --service keystone
* Set up a keystonerc file with a generated admin token and various passwords:
$> cat > keystonerc <<EOF
export ADMIN_TOKEN=$(openssl rand -hex 10)
export OS_USERNAME=admin
export OS_PASSWORD=verybadpass
export OS_TENANT_NAME=admin
export OS_AUTH_URL=
$> . ./keystonerc
* Set the administrative token in the config file
$> sudo openstack-config --set /etc/keystone/keystone.conf DEFAULT admin_token $ADMIN_TOKEN
* Start and enable Keystone service
$> sudo service openstack-keystone start && sudo chkconfig openstack-keystone on
* Create sample Tenants, Users and Roles
$> sudo ADMIN_PASSWORD=$OS_PASSWORD SERVICE_PASSWORD=servicepass openstack-keystone-sample-data
* Test the Keystone CLI is working
$> keystone user-list
|                id                | enabled |      email      |  name |
| 05742d10109540d2892d17ec312a6cd9 | True    | | admin |
| 25fe47659d6a4255a663e6add1979d6c | True    | | demo  |
== Configure nova to use keystone ==
* Change nova configuration to use keystone:
  sudo openstack-config --set /etc/nova/api-paste.ini filter:authtoken admin_tenant_name service
  sudo openstack-config --set /etc/nova/api-paste.ini filter:authtoken admin_user nova
  sudo openstack-config --set /etc/nova/api-paste.ini filter:authtoken admin_password servicepass
  sudo openstack-config --set /etc/nova/nova.conf DEFAULT auth_strategy keystone
  for svc in api compute; do sudo service openstack-nova-$svc restart; done
* Verify that nova can talk with keystone (requires OS_* exports from previous keystone section)
$> nova flavor-list
| ID |    Name  | Memory_MB | Swap | Local_GB | VCPUs | RXTX_Factor |
| 1  | m1.tiny  | 512      |      | 0        | 1    | 1.0        |
| 2  | m1.small  | 2048      |      | 10      | 1    | 1.0        |
| 3  | m1.medium | 4096      |      | 10      | 2    | 1.0        |
| 4  | m1.large  | 8192      |      | 10      | 4    | 1.0        |
| 5  | m1.xlarge | 16384    |      | 10      | 8    | 1.0        |
== Configure glance to use keystone ==
* Change glance configuration to use keystone:
  sudo openstack-config --set /etc/glance/glance-api.conf paste_deploy flavor keystone
  sudo openstack-config --set /etc/glance/glance-registry.conf paste_deploy flavor keystone
  sudo openstack-config --set /etc/glance/glance-api-paste.ini filter:authtoken admin_tenant_name service
  sudo openstack-config --set /etc/glance/glance-api-paste.ini filter:authtoken admin_user glance
  sudo openstack-config --set /etc/glance/glance-api-paste.ini filter:authtoken admin_password servicepass
  sudo openstack-config --set /etc/glance/glance-registry-paste.ini filter:authtoken admin_tenant_name service
  sudo openstack-config --set /etc/glance/glance-registry-paste.ini filter:authtoken admin_user glance
  sudo openstack-config --set /etc/glance/glance-registry-paste.ini filter:authtoken admin_password servicepass
  sudo service openstack-glance-api restart
  sudo service openstack-glance-registry restart
* Verify that glance can talk with keystone (requires OS_* exports from the previous keystone section)
$> glance index
== Nova Network Setup ==
To create the network do:
$> sudo nova-manage network create demonet 1 256 --bridge=demonetbr0
NB the network range here, should *not* be the one used on your existing physical network. It should be a range dedicated for the network that OpenStack will configure. So if clashes with your local network, pick another range
== Register an Image ==
To run an instance, you are going to need an image. There are prebuilt Fedora 16 JEOS (Just Enough OS) images that can be downloaded.
Note this will download a 200MB image (without a progress bar)
  $> glance add name=f16-jeos is_public=true disk_format=qcow2 container_format=ovf \
== Launch an Instance ==
Create a keypair:
$> nova keypair-add mykey > oskey.priv
$> chmod 600 oskey.priv
Configure key injection mode, to allow guestfs to inject into multiple guest types:
$> sudo openstack-config --set /etc/nova/nova.conf DEFAULT libvirt_inject_partition -1
$> sudo service openstack-nova-compute restart
Launch an instance:
$> nova boot myserver --flavor 2 --key_name mykey \
      --image $(glance index | grep f16-jeos | awk '{print $1}')
And then observe the instance running, observe the KVM VM running and SSH into the instance:
$> sudo virsh list
$> nova list
$> ssh -i oskey.priv root@  # use ec2-user instead of root if launching the image f16-x86_64-openstack-sda
$> nova console-log myserver
$> nova delete myserver
== Configure the OpenStack Dashboard ==
The OpenStack dashboard is the official web user interface for OpenStack. It should mostly work out of the box, as long as keystone has been configured properly.
* Install the dashboard
$> sudo yum install openstack-dashboard
* Make sure httpd is running
$> sudo service httpd restart
$> sudo chkconfig httpd on
* If selinux is enabled, you will have to allow httpd to access other network services (the dashboard talks to the http API of the other OpenStack services)
$> sudo setsebool -P httpd_can_network_connect=on
The dashboard should then be accessed with a web browser at http://localhost/dashboard . Account and password should be
what you configured for the keystone setup.
To open up the firewall ports for HTTP:
$> sudo lokkit -p http:tcp
$> sudo lokkit -p https:tcp
== Configure swift with keystone ==
These are the minimal steps required to setup a swift installation on RHEL which keystone authentication, this wouldn't be considered a working swift system but at the very least will provide you with a working swift API to test clients against, most notibly it doesn't include replication, multiple zones and loadbalancing
Ensure the keystone env variables are still setup from the previous steps
We need to create 5 configuration files
$> cat > /tmp/swift.conf <<- EOF
swift_hash_path_suffix = randomestringchangeme
$> sudo mv /tmp/swift.conf /etc/swift/swift.conf
$> cat > /tmp/proxy-server.conf <<- EOF
bind_port = 8080
workers = 8
user = swift
pipeline = catch_errors healthcheck cache authtoken keystone proxy-server
use = egg:swift#proxy
account_autocreate = true
paste.filter_factory = keystone.middleware.swift_auth:filter_factory
operator_roles = admin, swiftoperator
paste.filter_factory = keystone.middleware.auth_token:filter_factory
auth_port = 35357
auth_host =
auth_protocol = http
admin_token = ADMINTOKEN
#  ??? Are these needed?
service_port = 5000
service_host =
service_protocol = http
auth_token = ADMINTOKEN
use = egg:swift#healthcheck
use = egg:swift#memcache
memcache_servers =
use = egg:swift#catch_errors
$> sudo mv /tmp/proxy-server.conf /etc/swift/proxy-server.conf
$> cat > /tmp/account-server.conf <<- EOF
bind_ip =
workers = 2
pipeline = account-server
use = egg:swift#account
$> sudo mv /tmp/account-server.conf /etc/swift/account-server.conf
$> cat > /tmp/container-server.conf <<- EOF
bind_ip =
workers = 2
pipeline = container-server
use = egg:swift#container
$> sudo mv /tmp/container-server.conf /etc/swift/container-server.conf
$> cat > /tmp/object-server.conf <<- EOF
bind_ip =
workers = 2
pipeline = object-server
use = egg:swift#object
$> sudo mv /tmp/object-server.conf /etc/swift/object-server.conf
So that swift can authenticate tokens we need to set the keystone Admin token in the swift proxy file
$> sudo openstack-config --set /etc/swift/proxy-server.conf filter:authtoken admin_token $ADMIN_TOKEN
$> sudo openstack-config --set /etc/swift/proxy-server.conf filter:authtoken auth_token $ADMIN_TOKEN
Create the stoage device for swift, these instructions use a loopback device but a physical devive or logical volume can be used
$> truncate --size=20G /tmp/swiftstorage
$> DEVICE=$(sudo losetup --show -f /tmp/swiftstorage)
$> sudo mkfs.ext4 -I 1024 $DEVICE
$> sudo mkdir -p /srv/node/partitions
$> sudo mount $DEVICE /srv/node/partitions -t ext4 -o noatime,nodiratime,nobarrier,user_xattr
$> cd /etc/swift
Create the ring, with 1024 partitions (only suitable for a small test environment) and 1 zone
$> sudo swift-ring-builder account.builder create 10 1 1
$> sudo swift-ring-builder container.builder create 10 1 1
$> sudo swift-ring-builder object.builder create 10 1 1
Create a device for each of the account, container and object services
$> sudo swift-ring-builder account.builder add z1- 100
$> sudo swift-ring-builder container.builder add z1- 100
$> sudo swift-ring-builder object.builder add z1- 100
Rebalance the ring (allocates partitions to devices)
$> sudo swift-ring-builder account.builder rebalance
$> sudo swift-ring-builder container.builder rebalance
$> sudo swift-ring-builder object.builder rebalance
make sure swift owns appropriate files
$> sudo chown -R swift:swift /etc/swift /srv/node/partitions
Added the swift service and endpoint to keystone
$> SERVICEID=$(keystone  service-create --name=swift --type=object-store --description="Swift Service" | grep "id " | cut -d "|" -f 3)
$> echo $SERVICEID # just making sure we got a SERVICEID
$> keystone endpoint-create --service_id $SERVICEID --publicurl "\$(tenant_id)s" --adminurl "\$(tenant_id)s" --internalurl "\$(tenant_id)s"
Start the services
$> sudo service memcached start
$> for srv in account container object proxy  ; do sudo service openstack-swift-$srv start ; done
Test the swift client and upload files
$> swift list
$> swift upload container /path/to/file
= Additional Functionality =
== Using Eucalyptus tools ==
Set up a rc file for EC2 access (this expects a prior keystone configuration)
$> . ./keystonerc
$> USER_ID=$(keystone user-list | awk '/admin / {print $2}')
$> ACCESS_KEY=$(keystone ec2-credentials-list --user $USER_ID | awk '/admin / {print $4}')
$> SECRET_KEY=$(keystone ec2-credentials-list --user $USER_ID | awk '/admin / {print $6}')
$> cat > novarc <<EOF
export EC2_URL=http://localhost:8773/services/Cloud
$> chmod 600 novarc
$> . ./novarc
You should now be able to launch an image:
$> euca-run-instances f16-jeos -k nova_key
$> euca-describe-instances
$> euca-get-console-output i-00000001
$> euca-terminate-instances i-00000001
== Images ==
Rather than the prebuilt Fedora 16 JEOS image referenced above, there are other image options.
# Building a Fedora 16 JEOS image using [ Oz]
# Downloading ttylinux based minimal images used by OpenStack developers for testing
=== Building Fedora 16 JEOS Images With Oz ===
You can very easily build an image using Oz. First, make sure it's installed:
$> sudo yum install /usr/bin/oz-install
Create a template definition file called <code>f16-jeos.tdl</code> containing:
<description>My Fedora 16 x86_64 template</description>
  <install type='url'>
  <command name='setup-rc-local'>
sed -i 's/rhgb quiet/console=ttyS0/' /boot/grub/grub.conf
cat >> /etc/rc.local &amp;lt;&amp;lt; EOF
if [ ! -d /root/.ssh ]; then
  mkdir -p /root/.ssh
  chmod 700 /root/.ssh
# Fetch public key using HTTP
while [ ! -f /root/.ssh/authorized_keys ]; do
    curl -f > /tmp/aws-key 2>/dev/null
    if [ \$? -eq 0 ]; then
        cat /tmp/aws-key >> /root/.ssh/authorized_keys
        chmod 0600 /root/.ssh/authorized_keys
        restorecon /root/.ssh/authorized_keys
        rm -f /tmp/aws-key
        echo "Successfully retrieved AWS public key from instance metadata"
        FAILED=\$((\$FAILED + 1))
        if [ \$FAILED -ge \$ATTEMPTS ]; then
            echo "Failed to retrieve AWS public key after \$FAILED attempts, quitting"
        echo "Could not retrieve AWS public key (attempt #\$FAILED/\$ATTEMPTS), retrying in 5 seconds..."
        sleep 5
Then simply do:
$> sudo oz-install -d4 -u f16-jeos.tdl
Once built, you simply have to register the image with Nova:
$> glance add name=f16-jeos is_public=true container_format=bare disk_format=raw < /var/lib/libvirt/images/fedora16_x86_64.dsk
$> glance index
The last command should return a list of the images registered with the Glance image registry.
=== Downloading Existing Images ===
If you don't need a functioning Fedora 16 and want the smallest possible images, just download this set of images commonly used by OpenStack developers for testing and register them with Nova:
$> mkdir images
$> cd images
$> curl | tar xvfzo -
$> glance add name=aki-tty disk_format=aki container_format=aki is_public=true < aki-tty/image
$> glance add name=ami-tty disk_format=ami container_format=ami is_public=true < ami-tty/image
$> glance add name=ari-tty disk_format=ari container_format=ari is_public=true < ari-tty/image
Then to start the image:
$> euca-run-instances ami-tty --kernel aki-tty --ramdisk ari-tty -k mykey
== Volumes ==
If you use the Chrome browser, kill it before embarking on this section, as it has been [ known] to cause the lvcreate command to fail with 'incorrect semaphore state' errors.
Start the SCSI target daemon
$> sudo systemctl start tgtd.service
$> sudo systemctl enable tgtd.service
Create a new 1GB volume
$> VOLUME=$(euca-create-volume -s 1 -z nova | awk '{print $2}')
View the status of the new volume, and wait for it to become 'available'
$> watch "euca-describe-volumes | grep $VOLUME | grep available"
Re-run the previously terminated instance if necessary:
$> INSTANCE=$(euca-run-instances f16-jeos -k mykey | grep INSTANCE | awk '{print $2}')
$> INSTANCE=$(euca-run-instances ami-tty --kernel aki-tty --ramdisk ari-tty -k mykey | grep INSTANCE | awk '{print $2}')
Make the storage available to the instance (note -d is the device on the compute node)
$> euca-attach-volume -i $INSTANCE -d /dev/vdc $VOLUME
ssh to the instance and verify that the vdc device is listed in /proc/partitions
$> cat /proc/partitions
Now make the device available if /dev/vdc is not already present
$> mknod /dev/vdc b 252 32
Create and mount a file system directly on the device
$> mkfs.ext3 /dev/vdc
$> mkdir /mnt/nova-volume
$> mount /dev/vdc /mnt/nova-volume
Display some file system details
$> df -h /dev/vdc
Create a temporary file:
$> echo foo > /mnt/nova-volume/bar
Terminate and re-run the instance, then re-attach the volume and re-mount within the instance as above. Your temporary file will have persisted:
$> cat /mnt/nova-volume/bar
Unmount the volume again:
$> umount /mnt/nova-volume
Exit from the ssh session, then detach and delete the volume:
$> euca-detach-volume $VOLUME
$> euca-delete-volume $VOLUME
== Floating IPs ==
You may carve out a block of public IPs and assign them to instances.
First thing you need to do is make sure that nova is configured with the correct public network interface. The default is eth0, but you can change it by e.g.
$> sudo openstack-config-set /etc/nova/nova.conf DEFAULT public_interface em1
$> sudo systemctl restart openstack-nova-network.service
Then you can do e.g.
$> sudo nova-manage floating create
$> euca-allocate-address
$> euca-associate-address -i i-00000012
$> ssh -i nova_key.priv root@
$> euca-disassociate-address
$> euca-release-address
== VNC access ==
To setup VNC access to guests through the dashboard:
nova-novncproxy reads some parameters in /etc/nova/nova.conf file.
First you need to configure your cloud controller to enable VNC
novncproxy_host =
novncproxy_port = 6080
and in the nova compute nodes you need something like this
You should also make sure that openstack-nova-consoleauth has been started on the controller node:
$ controller> sudo /etc/init.d/openstack-nova-consoleauth restart</pre>
After restarting nova services on both nodes the newly created machines will run the qemu-kvm with a parameter -vnc compute_fqdn:display_number.
Then after starting the novncproxy and connecting to the dashboard it will discover the host and point to the novncproxy with the appropriate values and connect to the VM.
Note ensure than the iptables entries for VNC ports (5900+DISPLAYNUMBER) are allowed.
== Migrate and Resize ==
This is implemented currently by transferring the images between compute nodes over ssh.
Therefore currently you need to make these adjustments on each compute node to allow that.
* Allow logins for the nova user
  # usermod -s /bin/bash nova
  # su - nova
  $ mkdir .ssh && cd .ssh
* Disable host identity checking by adding this to ssh config
  $ cat > config <<EOF
  Host *
    StrictHostKeyChecking no
* Generate and distribute ssh key
  $ ssh-keygen -f id_rsa -b 1024 -P ''
  $ scp /var/lib/nova/.ssh/ root@otherHost:/var/lib/nova/.ssh/authorized_keys
  # chown nova:nova /var/lib/nova/.ssh/authorized_keys
  # semanage permissive -a sshd_t
To improve the SELinux config in future, the nova_var_lib_t context on /var/lib/nova will,
need to be configured to allow search access by sshd_t.
Also the ssh_home_t context will need to be associated with /var/lib/nova/.ssh
= Deployment =
== Adding a Compute Node ==
Okay, everything so far has been done on a single node. The next step is to add another node for running VMs.
Let's assume the machine you've set up above is called 'controller' and the new machine is called 'node'.
First, open the qpid, MySQL, Nova API and iSCSI ports on controller:
$ controller> sudo lokkit -p 3306:tcp
$ controller> sudo lokkit -p 5672:tcp
$ controller> sudo lokkit -p 9292:tcp
$ controller> sudo lokkit -p 3260:tcp
$ controller> sudo service libvirtd reload
Then make sure that ntp is enabled on both machines:
$> sudo yum install -y ntp
$> sudo service ntpd start
$> sudo chkconfig ntpd on
Install libvirt and nova on node:
$ node> sudo yum install --enablerepo=epel-testing openstack-nova python-keystone openstack-utils
$ node> sudo service libvirtd start
$ node> sudo chkconfig libvirtd on
$ node> sudo setenforce 0
Configure nova so that node can find the services on controller:
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT qpid_hostname controller
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT sql_connection mysql://nova:nova@controller/nova
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT glance_api_servers controller:9292
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT iscsi_ip_prefix
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT auth_strategy keystone
(The {{{iscsi_ip_prefix}}} value is the IP address of the controller node)
Configure the Network interfaces
The bridge name should match what use used in the nova-manage command on the controller
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT flat_network_bridge demonetbr0
The device which should be moved onto the bridge (nova will set up this bridge, once it done you can view it with the brctl command
$ node> sudo openstack-config --set /etc/nova/nova.conf DEFAULT flat_interface eth0
$ controller> sudo openstack-config --set /etc/nova/nova.conf DEFAULT flat_interface eth0
$ node> brctl show
Enable the compute service:
$ node> sudo service openstack-nova-compute start
Now everything should be running as before, except the VMs are launched either on controller or node. You will only be able to ping/ssh to vm's from the controller node.
== Manual Setup of MySQL ==
As of <code>openstack-nova-2011.3-9.el6</code> and <code>openstack-nova-2011.3-8.fc16</code>, <code>openstack-nova</code> is now set up to use MySQL by default.  If you're updating an older installation or prefer to set up MySQL manually instead of using the <code>openstack-nova-db-setup</code> script, this section shows how to do it.
First install and enable MySQL:
$> sudo yum install -y mysql-server
$> sudo service mysqld start
$> sudo chkconfig mysqld on
Set a password for the root account and delete the anonymous accounts:
$> mysql -u root
mysql> update mysql.user set password = password('iamroot') where user = 'root';
mysql> <nowiki>delete from mysql.user where user = ''</nowiki>;
Create a database and user account specifically for nova:
mysql> create database nova;
mysql> create user 'nova'@'localhost' identified by 'nova';
mysql> create user 'nova'@'%' identified by 'nova';
mysql> grant all on nova.* to 'nova'@'%';
(If anyone can explain why nova@localhost is required even though the anonymous accounts have been deleted, I'd be very grateful :-)
Then configure nova to use the DB and install the schema:
$> sudo openstack-config-set /etc/nova/nova.conf DEFAULT sql_connection mysql://nova:nova@localhost/nova
$> sudo nova-manage db sync
As a final sanity check:
$> mysql -u nova -p nova
Enter password:
mysql> select * from migrate_version;
= Miscellaneous =
== Smoke Tests ==
Nova comes with a selection of fairly basic smoke tests which you can run against your installation. It can be useful to use these to sanity check your configuration.
First off, you need the nova-adminclient python library which isn't yet packaged:
$> sudo yum install python-pip
$> sudo pip-python install nova-adminclient
Then you need a user and project both named admin:
$> sudo nova-manage user admin admin
$> sudo nova-manage project create admin admin
$> sudo nova-manage project zipfile admin admin
$> unzip
$> . ./novarc
Make sure you have the tty images imported as described above. You also need a block of floating IPs created, also as described above.
Then, run the tests from a fedpkg checkout:
$> fedpkg clone openstack-nova
$> cd openstack-nova
$> fedpkg switch-branch f16
$> fedpkg prep
$> cd nova-2011.3/smoketests
$> python ./
All the tests should pass.
If you run into import errors such as:
ImportError: No module named nose
ImportError (No module named paramiko)
simply install the missing dependency as follows:
$> sudo yum install -y python-nose.noarch
$> sudo yum install -y python-paramiko.noarch
== Cleanup ==
While testing OpenStack, you might want to delete everything related to OpenStack and start testing with a clean slate again.
Here's how. First, make sure to terminate all running instances:
$> euca-terminate-instances ...
Double check that you have no lingering VMs, perhaps saved to disk:
$> virsh list --all && virsh undefine
$> rm -f /var/lib/libvirt/qemu/save/instance-00000*
Then stop all the services:
$> for iii in /usr/lib/systemd/system/openstack-*.service; do sudo systemctl stop $(basename $iii); done
Delete all the packages:
$> sudo yum erase python-glance python-nova* python-keystone* openstack-swift* memcached
Delete the nova and keystone tables from the MySQL DB:
$> mysql -u root -p -e 'drop database nova;'
$> mysql -u root -p -e 'drop database keystone;'
Delete the nova-volumes VG:
$> sudo vgchange -an nova-volumes
$> sudo losetup -d /dev/loop0
$> sudo rm -f /var/lib/nova/nova-volumes.img
Take down the bridge and kill dnsmasq:
$> sudo ip link set demonetbr0 down
$> sudo brctl delbr demonetbr0
$> sudo kill -9 $(cat /var/lib/nova/networks/
Remove all directories left behind from the packages:
$> sudo rm -rf /etc/{glance,nova,swift,keystone,openstack-dashboard} /var/lib/{glance,nova,swift,keystone} /var/log/{glance,nova,swift,keystone} /var/run/{glance,nova,swift,keystone}
Remove swift storage device (if we don't want the data)
$> sudo umount /srv/node/partitions
$> sudo losetup -d $DEVICE
$> rm /tmp/swiftstorage
Finally, restart iptables to clear out all rules added by Nova. You also need to reload libvirt's iptables rules:
$> sudo service iptables restart
$> sudo service libvirtd restart

Latest revision as of 10:22, 5 August 2014

OpenStack in EPEL

The OpenStack Folsom was retired from EPEL 6. Please visit RDO project for running OpenStack on EL platforms.