Networking/Bonding

From FedoraProject

< Networking(Difference between revisions)
Jump to: navigation, search
(Using NetworkManager (native configuration))
(Using NetworkManager (native configuration))
Line 38: Line 38:
 
id=BondSlave
 
id=BondSlave
 
uuid=6c8ca7ff-7e45-4ace-88e7-67f0e9b1b149
 
uuid=6c8ca7ff-7e45-4ace-88e7-67f0e9b1b149
 +
type=802-3-ethernet
 
master=f77ad31a-5b83-4b70-a355-5a76220b2fb6
 
master=f77ad31a-5b83-4b70-a355-5a76220b2fb6
 
slave-type=bond
 
slave-type=bond
 +
  
 
[802-3-ethernet]
 
[802-3-ethernet]

Revision as of 17:40, 17 March 2013

Plase wait for NetworkManager 0.9.8 before considering this feature fully working. I have prepared a feature page for this.

I haven't yet tested this and the following configuration is reported to be broken through the mailing list. But, eventually, this page will include a working and tested configuration.

Using iproute2

Bridge devices can be easily adding using the ip command. This way is suitable for testing.

name=my-bridge

ip link add $name type bridge

Using NetworkManager (native configuration)

TODO: Test the configuration.

/etc/NetworkManager/system-connections/Bond

[connection]
id=Bond
uuid=f77ad31a-5b83-4b70-a355-5a76220b2fb6
type=bond

[bond]
interface-name=bond0

/etc/NetworkManager/system-connections/BondSlave

[connection]
id=BondSlave
uuid=6c8ca7ff-7e45-4ace-88e7-67f0e9b1b149
type=802-3-ethernet
master=f77ad31a-5b83-4b70-a355-5a76220b2fb6
slave-type=bond


[802-3-ethernet]
mac-address=02:aa:bb:cc:dd:ee

Note that you have to set up the correct MAC for to match BondSlave to the right Ethernet interface. You should generate one uuid for Bond and but it to BondSlave's master option and one uuid for BondSlave.

Using NetworkManager (ifcfg-rh configuration plugin)

TODO: Fix and simplify the following configuration.

# cat ifcfg-bond0
DEVICE=bond0
BOOTPROTO=dhcp
ONBOOT=yes
NM_CONTROLLED="yes"
BONDING_MASTER="yes"
BONDING_OPTS="miimon=50 mode=balance-tlb"

# cat ifcfg-em3
BOOTPROTO="none"
DEVICE="em3"
ONBOOT="yes"
MASTER="bond0"
SLAVE="yes"
TYPE=Ethernet
NM_CONTROLLED="yes"

This won't work!