Networking/Bonding

From FedoraProject

< Networking
Revision as of 20:54, 10 December 2012 by Pavlix (Talk | contribs)

Jump to: navigation, search

Plase wait for NetworkManager 0.9.8 before considering this feature fully working. I have prepared a feature page for this.

I haven't yet tested this and the following configuration is reported to be broken through the mailing list. But, eventually, this page will include a working and tested configuration.

Using iproute2

Bridge devices can be easily adding using the ip command. This way is suitable for testing.

name=my-bridge

ip link add $name type bridge

Using NetworkManager (native configuration)

TODO: Test the configuration.

bonding interface:

[connection]
id=...
uuid=...
type=bond

[bond]
interface-name=bond0

slave interface:

[connection]
id=...
uuid=...
master=bond0
slave-type=bond

Using NetworkManager (ifcfg-rh configuration plugin)

TODO: Fix and simplify the following configuration.

# cat ifcfg-bond0
DEVICE=bond0
BOOTPROTO=dhcp
ONBOOT=yes
NM_CONTROLLED="yes"
BONDING_MASTER="yes"
BONDING_OPTS="miimon=50 mode=balance-tlb"

# cat ifcfg-em3
BOOTPROTO="none"
DEVICE="em3"
ONBOOT="yes"
MASTER="bond0"
SLAVE="yes"
TYPE=Ethernet
NM_CONTROLLED="yes"

This won't work!