Packstack to Quantum
The following is a description of how to go from packstack with traditional nova networking to Quantum. In the example below the OpenvSwitch plugin is used:
1. Terminate nova networking
service openstack-nova-network stop chkconfig openstack-nova-network off
2. Install quantum service
yum install openstack-quantum
3. Install OpenvSwicth plugin
yum install openstack-quantum-openvswitch
4. The Quantum installation scripts make use of keystone environment variables. Make sure that the administrator environment variables are set.
5. Configure quantum service
6.1. The above script will ask if the nova parameters need to be updated. Restart the nova compute service. The script will configure Quantum as the networking module for Nova.
service openstack-nova-compute restart
6.2 Start the openvswitch service
service openvswitch start chkconfig openvswitch on
6.3 Create the integration bridge (for the private network)
ovs-vsctl add-br br-int
6.4 Create the externak bridge (for the layer 3 agent)
ovs-vsctl add-br br-ex
6.5 Ensure that the interfaces are persistant after reboot. This is done by creating interface files, for example for br-int:
DEVICE=br-int DEVICETYPE=ovs TYPE=OVSBridge ONBOOT=yes
7. Start quantum service
service quantum-server start chkconfig quantum-server on
7.1 Start quantum agent
service quantum-openvswitch-agent start chkconfig quantum-openvswitch-agent on
8. In order for the IPAM to take place one needs to invoke the DHCP agent. Use the DHCP setup tool
8.1. Start DHCP agent
service quantum-dhcp-agent start chkconfg quantum-dhcp-agent on
9. In order to support floating IP's one need to invoke the Layer 3 agent. Use the L3 agent setup tool
9.1. Start the L3 agent
service quantum-l3-agent start chkconfig quantum-l3-agent on
10. Ensure that the openvswitch cleanup utility is enabled (this is used after reboot to ensure that device management of the quantum agents is not affected by the fact that the openvswitch creates the interfaces at boot)
chkconfig quantum-ovs-cleanup on
11. Create a Quantum endpoint with keystone
keystone service-create --name=quantum --type=network --description="Quantum Service" keystone endpoint-create --region RegionOne --service-id<ID> --publicurl "http://127.0.0.1:9696" --adminurl "http://127.0.0.1:9696" --internalurl "http://127.0.0.1:9696"
12. Create a keystone tenant and user.
13. Now one is able to start to use the Quantum CLI
13.1 Create a private network
quantum net-create private
13.2 Create a subnet
quantum subnet-create 10.0.0.0/24
14. Validate that a port has been created by the DHCP agent (quantum port-list). This port will have IP address 10.0.0.2. The gateway will 10.0.0.1.
15. At this stage VM's can be deployed and they will receive IP addresses from the DHCP service.