From Fedora Project Wiki

Revision as of 11:17, 6 October 2009 by Jlaska (talk | contribs) (Use template)

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Description

This test is intended to ensure that the console= parameter is honored and the post-installed systems is configured properly for a non tty0 console. While the examples mention the use of console=ttyS0, it it acceptable to use any device other than the default tty0.

Idea.png
This test case may require using a DB-9 serial cable to connect to the system under test. Additionally, you may be required to update the BIOS to enable the serial port.


How to test

  1. Using a DB-9 serial cable, connect to your test system on the first port (typically S0) and start a serial port monitoring application (ttywatch, cermit, or minicom)
  2. Boot installation program passing the console=ttyS0 command line parameter
  3. Complete installation and boot into installed system

Expected Results

  • The installation displays properly works over the serial line
  • Confirm that a login console is presented over the serial device
  • When using upstart (Fedora9), you may confirm that the serial device is configured for login by examining the output of initctl. For example,
serial (instance)
(start) running, process 1116
  • When using sysvinit (prior to Fedora9), you may confirm that the file /etc/inittab has a login entry for the requested serial port. For example: 
    co:2345:respawn:/sbin/agetty ttyS1 115200 vt100-nav
  1. The file /etc/securetty contains a line matching the requested console
Retrieved from "https://fedoraproject.org/w/index.php?title=QA:Testcase_Anaconda_User_Interface_serial_console&oldid=128465"