QA:Testcase Anaconda User Interface serial console

From FedoraProject

Revision as of 14:13, 24 May 2008 by ImportUser (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

QA/TestCases/UserInterfaceSerial

Description

This test is intended to ensure that the console= parameter is honored and the post-installed systems is configured properly for a non tty0 console. While the examples mention the use of console=ttyS0, it it acceptable to use any device other than the default tty0.

Idea.png
This test case may require using a DB-9 serial cable to connect to the system under test. Additionally, you may be required to update the BIOS to enable the serial port.


Steps To Reproduce

1. Using a DB-9 serial cable, connect to your test system on the first port (typically S0) and start a serial port monitoring application (ttywatch, cermit, or minicom) 1. Boot installation program passing the console=ttyS0 command line parameter 1. Complete installation and boot into installed system

Expected Results

1. The installation displays properly works over the serial line 1. Confirm that a login console is presented over the serial device

  • When using upstart (Fedora9), you may confirm that the serial device is configured for login by examining the output of initctl. For example,

serial (instance) (start) running, process 1116

  • When using sysvinit (prior to Fedora9), you may confirm that the file /etc/inittab has a login entry for the requested serial port. For example:

co:2345:respawn:/sbin/agetty ttyS1 115200 vt100-nav

1. The file /etc/securetty contains a line matching the requested console