Test Day:2011-02-23 Radeon

From FedoraProject

Revision as of 16:13, 23 February 2011 by Ericb (Talk | contribs)

Jump to: navigation, search
DATE TIME WHERE
Wed Feb 23, 2011 ALL DAY #fedora-test-day webchat
Note.png
Arriving after the date above?
If you come to this page after the test day is completed, your testing of Radeon is still valuable, and you can use the information on this page to test Radeon with your graphics card and provide feedback. If you are visiting after the release of Fedora 15, please wait for the next Radeon test day.

Contents

What to test?

Today's Fedora Test Day will focus on the radeon driver for ATI/AMD Radeon graphics cards.

If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion...

What's needed to test

  • An ATI Radeon (or FireGL) graphics adapter. To confirm whether you have supporting hardware, run the following command under root:
    /sbin/lspci -d 1002: | grep -iq VGA && echo "Join Radeon Fedora Test Day" || echo "Sorry, no Radeon graphics hardware found."
  • An updated Fedora 22 pre-release, or the special live image (see below)
  • Your hardware profile uploaded to Smolt according to these instructions

How to test?

Update your machine

If you're running Fedora 22, make sure you have all the current updates for it installed, using the update manager. Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 22 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture SHA256SUM
i686 4553b73f8fab46fbb85384974decc7f9595e5c7af6df76e303cef5e62a76e07f
x86_64 e59d1886f7b766011b89d88369d09a4dd46bd7ba8a25664e9de0430d0f8725d7

Testing

Follow each of these test cases:

Multihead test case:

You will need two or more monitors to perform the multihead test.

Optional extended OpenGL test cases (some of these will require you to at least move around in games):

These will provide more detailed testing of 3D functionality. Please file bugs for any failures you find if running these tests.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-ati. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Example user as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, use the result template to enter your result, as shown in the example result line. If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments
Example user HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Fail fail [1]
Warning warn [2]
  1. RHBZ #123456
  2. RHBZ #234567
Jorge HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail [1]
Pass pass
N/A
Fail fail [2]
Warning warn [3]
  1. RHBZ #segfault
  2. RHBZ #123456
  3. RHBZ #234567
Faelar HW
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Fail fail
[2]
Pass pass
Pass pass
[3]
Pass pass
Pass pass
Pass pass
N/A N/A
  1. Artifacts (Non-persistent black horiz. lines)
  2. Blank screen, I can't do anything then, reboot forced.
  3. renderchecklog.gz
NJM HW
Pass pass
Fail fail
[1]
Pass pass
Fail fail
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
  1. GNOME Shell starts and runs, but misrenders nearly everything.
  2. Color corruption outside of the video rectangle
RHBZ: 679579

Several mesa-demo apps misrender. RHBZ: 679588

Jaroslav Pulchart HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Reinout van Schouwen HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
[2]
Pass pass
  1. File:Renderchecklog.gz
  2. 36fps in fullscreen mode
Jordan Clarke HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
MahMahoritos HW
Pass pass
Warning warn [1]
[2]
Pass pass
Pass pass
Pass pass
Pass pass [1]
[3]
Pass pass
[4]
Pass pass
Fail fail
[5]
Warning warn
[6]
Fail fail
[7]
Warning warn
[8]
  1. 1.0 1.1 RHBZ #679685
  2. Gnome Shell doesn't start
  3. Second startx make Gnome Shell working
  4. http://www.fpaste.org/LjZa/
  5. Can't switch users without Gnome Shell, only log out option available
  6. Can't switch back to Gnome, Ctrl+Alt+F1 craches system at all
  7. System sleeps (pm-suspend), then wakes up, but I can't run any programm and 'su' in terminal doesn't work
  8. HDMI hotplug (after log in) doesn't work at all; if HDMI is connected before system starts, then everything works fine, every display supports its native resolution
Philip V HW[1]
Fail fail [2]
[3]
Fail fail
Warning warn
[4]
Warning warn
Fail fail
N/A
Pass pass
[5]
Pass pass
N/A N/A
Fail fail
[6]
Fail fail [7]
[8]
  1. 01:00.0 [0300]: ATI RV280 [Radeon 9200 PRO] [1002:5960] (rev 01)

    01:00.1 [0380]: ATI RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)

    Dual head did work in Fedora 13.
    
  2. RHBZ #679674
  3. The default boot always gets stuck immediately. 'Boot Basic Video' succeeds. Not sure how to report the rest of these tests as testcases assume no 'nomodeset'; 'Boot Basic Video' uses 'nomodeset'.
  4. All warnings mean: only works with the forbidden 'nomodeset'/'Boot Basic Video'.
  5. https://fedoraproject.org/w/uploads/c/c3/Renderchecklog_RV280.txt
  6. Resume after Suspend from Login Screen has dead keyboard and Mouse
  7. RHBZ #653803
  8. xrandr only sees one monitor with 0Hz refresh rate
MadRouter HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
[3]
Pass pass
Warning warn
[4]
Pass pass
  1. gnome shell does not start after first boot, start successfully after next boots
  2. File:Radeon renderchecklog madrouter.gz
  3. work fine from gnome 3 shell, N/A from gnome desktop
  4. shut down instead of suspend from gnome 3 shell, but work fine from gnome desktop
dbkblk HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[2]
Pass pass
Warning warn
[3]
Warning warn
[4]
Warning warn
[5]
N/A
  1. Gnome shell does not start after first boot (fallback mode), start successfully when logout > login. OK with "gnome-shell --replace".
  2. 44 steps/46. [1](Didn't understood how to upload it here)
  3. The switch worked but when i log out the 2nd user, it fall back into the 1st user session and not gdm !! Moreover, the insight of the overlay window show 3 same nautilus thumbnails instead of the correct thumbnails.
  4. Works, but unusable because a message keep showing each second: “[random numbers...] hub 1-0:1.0 Unable to enumerate USB device on port 2“
  5. Works with “pm-suspend” but the suspend menu of gnome 3 shut down the computer instead of suspending it.
Wyatt Gosling HW
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[3]
  1. Artifacts between Plymouth and login screens.
  2. only 44 of 46 passed. [2]
  3. xrardr output [3]. Login screen chose correct screen as primary, but the session did not. Gnome 3's config tool did not provide a means to fix this. Physically unplugging the display was required for desired behavior.
Mira HW
Pass pass
Warning warn
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[2]
N/A
  1. Always after 1st log-in Gnome in fallback mode, after log-out log-in Gnome shell started
  2. System didn't suspend successfully, it just simply switched off
geopan HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
[1]
Pass pass
Pass pass
Pass pass
Pass pass
N/A multihead
  1. only 44 of 46 passed, but was unable to upload renderchecklog
lersek FIXME add link later [1]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[2]
Pass pass
[3]
Pass pass
Pass pass
Warning warn
[4]
N/A
  1. For lack of a better place, I'll put here the results of the 3D tests I tried:
    • pymol: I had to set gpgcheck=0 so that I could install it. Functionality was okay, but it was extremely slow.
    • avogadro: tried to build C2H6, the program crashed multiple times with std::bad_alloc. 1.2 GB of RAM was still free.
    • openarena: during the first installation with yum, the optical drive started thrashing and the system froze stiff. The second installation (after reboot) completed. I started the program and immediately selected "exit" from the main menu. This crashed my X server and all programs connected to it; I had to re-login.
    • tuxracer: functionality was okay, no flicker, no crash. I added "display FPS" to the default settings. In 1920x1200, the refresh rate was steadily below 15 fps. (Probably weak hardware.)
    • mesa-demos: bounce was okay, but fbo_firecube exited immediately with SIGBUS, and then any program I touched (ls, ps, firefox) immediately died with EIO. The system became unusable and I had to power it down forcibly.

    The OpenGL renderer string was each time Gallium 0.4 on AMD RS880. Summary: 2D works extremely well, but I think I can't use 3D for anything serious.

    Sometime during the tests "prelink" started to thrash the CD in the background, without me starting it, and when it completed or stopped, the system crashed. This is a separate (earlier) case than the openarena case above.

  2. 44 tests passed of 46 total [4].
  3. glxgears synced to monitor refresh rate, 60Hz.
  4. Desktop machine powered off completely.
Spiro HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Ivo Anjo HW [1]
Pass pass
Pass pass
Pass pass
Fail fail
Pass pass
Pass pass
Pass pass
[2]
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
  1. ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142]
  2. File:Renderchecklog.bz2
Vlads HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
N/A
Pass pass
warning
[2]
N/A
  1. renderchecklog.gz
  2. Shutdown instead of suspend
domk HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
N/A
Pass pass
Pass pass
Pass pass
Pass pass
N/A RS780M/RS780MN Radeon HD 3200 [1002:9612]
Marek Zdunek HW[1]
Pass pass
Fail fail [2] [3]
Pass pass
Pass pass
Warning warn [4]
Warning warn [5]
Warning warn
[6]
Warning warn
[7]
Pass pass
Pass pass
N/A[8] N/A
  1. some logs
  2. RHBZ #677555
  3. RHBZ #679326
  4. RHBZ #677371
  5. RHBZ #677461
  6. 44 tests passed of 46 total renderchecklog
  7. unspecified nautilus crash
  8. shutdown instead of suspend on LiveCD x86_64
User:pfps HW
Pass pass
Fail fail
[1]
none
none
none
none
none
none
none
none
none
none
  1. repeated crashes in mutter
MC HW
Pass pass
Fail fail
[1]
Pass pass
Pass pass
Pass pass
Warning warn
[2]
Fail fail
[3]
Fail fail
[4]
Warning warn
[5]
Pass pass
Warning warn
[6]
N/A
  1. repeated crashes in mutter
  2. not login in gdm
  3. lost when the system is the result of decreased
  4. segmentation failed
  5. not login in gdm
  6. Xorg started manualy from console
pda HW
Pass pass [1]
Fail fail
[2]
Pass pass
Pass pass
Pass pass
Fail fail
[3]
Warning warn
[4]
Fail fail [5]
N/A[6]
Pass pass
Fail fail
[7]
N/A 03:00.0 VGA compatible controller: ATI Technologies Inc Device 689c
  1. RHBZ #678193
  2. No gnome-shell started. Only old gnome-panel.
  3. Only desktop wallpaper and infinite flashing mutter crash notice on second startx. No way to open Abrt.
  4. File:Renderchecklog radeon pda x86.gz
  5. RHBZ #679774
  6. Without gnome-shell there no fast user switching applet.
  7. Computer was sleep forever. (Until reset)
Ferry Huberts HW
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
[1]
Pass pass
Pass pass
Pass pass
Pass pass
Warning warn
[2]
  1. can't upload file without being logged in
  2. after several plug/unplug actions dragging windows around is very slow. logging out and in again fixes it.
V99 Glu HW
Pass pass
Pass pass
Pass pass
Pass pass
[1]
Pass pass
Pass pass
[2]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
  1. test passed, but "menu/Open" crashed totem (by the way, gedit, too)
  2. startx reports a lot of errorsFile:Testday-20110223-startx.log
Eric Blake HW
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
VM
Warning warn
[1] [2]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
  1. into fallback mode
  2. encountered BZ 679826 while testing - control-center window is too large for 1024x768
Foppe[1][2] HW
Pass pass
Pass pass
Pass pass
Pass pass
[3]
Pass pass
Pass pass
Pass pass
[4]
Pass pass
Pass pass
Pass pass
Pass pass
[5]
Warning warn
[6][7]
3D_Pymol works nice.
  1. x86_64 live CD
  2. ATI mobility 5650/1Gb
  3. Can't move slider
  4. File:Renderchecklog 2011-02-23 foppe.gz
  5. Suspend from menu results in shutdown, close lid || suspend from shutdown menu OK
  6. startup results in clone /w wrong resolution. Disabling <-> enabling requires login. Once dualhead is activated it works as advertised.
  7. File:Xrandr 2011-02-23 foppe.gz
Cédric Olivier HW
Pass pass
Inprogress inprogress
Pass pass
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
Ostinru HW
Warning warn
[1]
Pass pass
[2]
Pass pass
Pass pass
Pass pass
N/A
Warning warn
[3]
Pass pass
[4]
Pass pass
Pass pass
Pass pass
N/A
  1. when intel&radeon cards availibl livecd doesn't boot photo. When intel card disabled in BIOS livecd boot sucsesfully
  2. liveDVD loads in gnome2. gnome-shall --replace fix it
  3. 44/46 in gnome shall log
  4. 60FPS is too slow!
Ferry Huberts HW
Warning warn
[1]
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
Inprogress inprogress
N/A
Inprogress inprogress
Inprogress inprogress
  1. First boot I did from live CD resulted in the GNOME panel fallback. 'gnome-shell --replace' to get to the shell worked. Second boot logged in into gnome-shell ok.
- User Smolt Profile Basic test GNOME 3 start DPMS XVideo Rotation X restart Rendercheck GLX User switch VT switch Suspend Multihead Comments