Fedora

1. ↑ RHBZ #123456
2. ↑ RHBZ #234567

1. ↑ RHBZ #segfault
2. ↑ RHBZ #123456
3. ↑ RHBZ #234567

1. ↑ Artifacts (Non-persistent black horiz. lines)
2. ↑ Blank screen, I can't do anything then, reboot forced.
3. ↑ renderchecklog.gz

1. ↑ GNOME Shell starts and runs, but misrenders nearly everything.
2. ↑ Color corruption outside of the video rectangle

Several mesa-demo apps misrender. RHBZ: 679588

1. ↑ #679841
2. ↑ File:Jaroslav.pulchart rv740 renderchecklog.gz
3. ↑ The switching worked well. Logout is sometimes weird, once I ended in terminal instead in GDM, once it cored sesion of second user,...
4. ↑ Suspend is OK. There is "shut down" instead of "suspend" in Gnome3 shell.
5. ↑ Disabling/Enabling second monitor is not automatic when it is Disconnected/Connected. xrandr command or display properties must be started for detecting this change.

1. ↑ Blank screen, reboot required.
2. ↑ File:Jaroslav.Pulchart r580 renderchecklog.gz

1. ↑ File:Renderchecklog.gz
2. ↑ 36fps in fullscreen mode
3. ↑ After resume, I get an SELinux alert: 'The source process /sbin/consoletype Attempted this access: read On this file: /var/log/pm-suspend.log
4. ↑ File:Xrandr reinouts.out
5. ↑ Gnome shell hot corner doesn't work any more

1. ↑ ^{1.0 1.1} RHBZ #679685
2. ↑ Gnome Shell doesn't start
3. ↑ Second startx make Gnome Shell working
4. ↑ http://www.fpaste.org/LjZa/
5. ↑ Can't switch users without Gnome Shell, only log out option available
6. ↑ Can't switch back to Gnome, Ctrl+Alt+F1 craches system at all
7. ↑ System sleeps (pm-suspend), then wakes up, but I can't run any programm and 'su' in terminal doesn't work
8. ↑ HDMI hotplug (after log in) doesn't work at all; if HDMI is connected before system starts, then everything works fine, every display supports its native resolution

1. ↑ 01:00.0 [0300]: ATI RV280 [Radeon 9200 PRO] [1002:5960] (rev 01)

   01:00.1 [0380]: ATI RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)

   Dual head did work in Fedora 13.
   

2. ↑ RHBZ #679674
3. ↑ The default boot always gets stuck immediately. 'Boot Basic Video' succeeds. Not sure how to report the rest of these tests as testcases assume no 'nomodeset'; 'Boot Basic Video' uses 'nomodeset'.
4. ↑ All warnings mean: only works with the forbidden 'nomodeset'/'Boot Basic Video'.
5. ↑ https://fedoraproject.org/w/uploads/c/c3/Renderchecklog_RV280.txt
6. ↑ Resume after Suspend from Login Screen has dead keyboard and Mouse
7. ↑ RHBZ #653803
8. ↑ xrandr only sees one monitor with 0Hz refresh rate

1. ↑ gnome shell does not start after first boot, start successfully after next boots
2. ↑ File:Radeon renderchecklog madrouter.gz
3. ↑ work fine from gnome 3 shell, N/A from gnome desktop
4. ↑ shut down instead of suspend from gnome 3 shell, but work fine from gnome desktop

1. ↑ Gnome shell does not start after first boot (fallback mode), start successfully when logout > login. OK with "gnome-shell --replace".
2. ↑ 44 steps/46. [1](Didn't understood how to upload it here)
3. ↑ The switch worked but when i log out the 2nd user, it fall back into the 1st user session and not gdm !! Moreover, the insight of the overlay window show 3 same nautilus thumbnails instead of the correct thumbnails.
4. ↑ Works, but unusable because a message keep showing each second: “[random numbers...] hub 1-0:1.0 Unable to enumerate USB device on port 2“
5. ↑ Works with “pm-suspend” but the suspend menu of gnome 3 shut down the computer instead of suspending it.

1. ↑ Artifacts between Plymouth and login screens.
2. ↑ only 44 of 46 passed. [2]
3. ↑ xrardr output [3]. Login screen chose correct screen as primary, but the session did not. Gnome 3's config tool did not provide a means to fix this. Physically unplugging the display was required for desired behavior.

1. ↑ Always after 1st log-in Gnome in fallback mode, after log-out log-in Gnome shell started
2. ↑ System didn't suspend successfully, it just simply switched off

1. ↑ only 44 of 46 passed, but was unable to upload renderchecklog

1. ↑ ATI Technologies Inc RS880 [Radeon HD 4200] [1002:9710]
2. ↑ 44 tests passed of 46 total [4].
3. ↑ glxgears synced to monitor refresh rate, 60Hz.
4. ↑ Desktop machine powered off completely.

1. ↑ ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142]
2. ↑ File:Renderchecklog.bz2

1. ↑ renderchecklog.gz
2. ↑ Shutdown instead of suspend

1. ↑ some logs
2. ↑ RHBZ #677555
3. ↑ RHBZ #679326
4. ↑ RHBZ #677371
5. ↑ RHBZ #677842
6. ↑ RHBZ #677461
7. ↑ 44 tests passed of 46 total renderchecklog
8. ↑ unspecified nautilus crash
9. ↑ shutdown instead of suspend on LiveCD x86_64

1. ↑ repeated crashes in mutter

1. ↑ repeated crashes in mutter
2. ↑ not login in gdm
3. ↑ lost when the system is the result of decreased
4. ↑ segmentation failed
5. ↑ not login in gdm
6. ↑ Xorg started manualy from console

1. ↑ RHBZ #678193
2. ↑ No gnome-shell started. Only old gnome-panel.
3. ↑ Only desktop wallpaper and infinite flashing mutter crash notice on second startx. No way to open Abrt.
4. ↑ File:Renderchecklog radeon pda x86.gz
5. ↑ RHBZ #679774
6. ↑ Without gnome-shell there no fast user switching applet.
7. ↑ Computer was sleep forever. (Until reset)

1. ↑ http://pastebin.com/SNbph9VS
2. ↑ after several plug/unplug actions dragging windows around is very slow. logging out and in again fixes it.

1. ↑ test passed, but "menu/Open" crashed totem (by the way, gedit, too)
2. ↑ startx reports a lot of errors File:Testday-20110223-startx.log
3. ↑ File:Testday-20110223-v99glu-renderchecklog.gz
4. ↑ pulseaudio does not work correctly (muted) when I switch from graphical desktop to another one. If I switch from graphical desktop to any text mode console and then to another graphical desktop, then pulseaudio works rightly.
5. ↑ First, "System menu/Suspend..." opens Shutdown dialog, second, about 10 seconds after pm-suspend system does power-off. After system powered-on display stays in standby mode. Only hard reset helps me.

1. ↑ RHBZ #679849
2. ↑ keyboard and mouse lock up the moment gnome-shell starts
3. ↑ test run in fall-back mode
4. ↑ test run in fall-back mode; gstreamer-properties started fine, but after several minutes, I got a kernel panic, may be same as BZ 679849

1. ↑ into fallback mode, as expected for a VM
2. ↑ encountered BZ 679826 while testing - control-center window is too large for 1024x768
3. ↑ RHBZ #679868
4. ↑ dpms had no effect
5. ↑ totem ran fine; gstreamer-properties fails with "X Window System (X11/XShm/Xv): Could not initialise Xv output"; also gstreamer-properties dumps core if accidentally run as root instead of a normal user

1. ↑ x86_64 live CD
2. ↑ ATI mobility 5650/1Gb [1002:68c1]
3. ↑ Can't move slider
4. ↑ File:Renderchecklog 2011-02-23 foppe.gz 44 tests passed of 46 total
5. ↑ 60.25 FPS
6. ↑ Suspend from menu results in shutdown, close lid || suspend from shutdown menu OK
7. ↑ startup results in clone /w wrong resolution. Disabling <-> enabling requires login. Once dualhead is activated it works as advertised.
8. ↑ File:Xrandr 2011-02-23 foppe.gz

1. ↑ when intel&radeon cards availibl livecd doesn't boot photo. When intel card disabled in BIOS livecd boot sucsesfully
2. ↑ liveDVD loads in gnome2. gnome-shall --replace fix it
3. ↑ 44/46 in gnome shall log
4. ↑ 60FPS is too slow!

1. ↑ First boot I did from live CD resulted in the GNOME panel fallback. 'gnome-shell --replace' to get to the shell worked. Second boot logged in into gnome-shell ok.
2. ↑ http://pastebin.com/4kAxAne2
3. ↑ probably due to the areca raid card, that has always prevented suspend so far

1. ↑ File:Renderchecklog.gz 2124236 tests passed of 2124238 total
2. ↑ In overview mode the frame rate drops dramaticly
3. ↑ GDM does not work with any password! (I use automatic login to login) TODO: file a bug if it is not my own fault

1. ↑ RHBZ #679867
2. ↑ Didn't work the first time.

1. ↑ File:Jstodola renderchecklog.gz 2124236 tests passed of 2124238 total
2. ↑ using pm-suspend

1. ↑ Moving windows is snapy over video
2. ↑ Artefacts when rotating screen in dual heads configuration
3. ↑ File:Madko f15 hd4350 Renderchecklog.gz

1. ↑ can't upload file

1. ↑ https://fedoraproject.org/w/uploads/0/08/Renderchecklog-ati.log
2. ↑ only 60 FPS max

1. ↑ I have some artifacts while switching between console and bootsplash during boot process
2. ↑ Gnome Shell does't start, fallback to gnome-panel. Log-out - log-in does't help. Some elements of UI have the wrong color.screenshot
3. ↑ #677555
4. ↑ Xv works fine without compositing. 'compiz-gtk --replace' ends with a segfault.
5. ↑ Can't run a Gnome Shell.

1. ↑ fallback to mis-themed gnome-panel. Running 'gnome-shell --replace' ends with a signal 11. Bug #679912
2. ↑ xv tests work without a compositor, running 'compiz-gtk --replace' ends with a segfault and no window manager
3. ↑ initial startx and logout back to console work fine. Second startx shows the background, flashing a black horizontal bar about once a second, and occasionally a mutter abrt notification. Switching back to console shows "Shell killed with signal 11".
4. ↑ soon after starting, test blocks are printed diagonally across the screen. When the run is complete the stride is wrong, so I can tell I have a prompt, but not read any of the output.
5. ↑ Graphics suspend seems to work. Other things break though (commands Bus error after second resume).
6. ↑ Configurations and environment worked fine. However, plug/unplug events didn't seem to be noticed until xrandr was run or gnome-settings display was launched or 'detect monitors' clicked.

1. ↑ RHBZ #679806

1. ↑ [5] 44 tests passed of 46 total

1. ↑ needed to pass video=1280x1024 to kernel commandline, otherwise the monitor beeps and flickers
2. ↑ got to the fallback mode, but works during the restart test and after relogin
3. ↑ saw X segfaulting [6]
4. ↑ renderchecklog.gz
5. ↑ ~75 FPS in glxgears
6. ↑ fonts strange, selected text is black on black as are some scrollbars
7. ↑ desktop is on console 7, not 1 for me

1. ↑ ^{1.0 1.1} RHBZ #677931
2. ↑ Crash with GNOME, Login o.k. with KDE Live CD; ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975]
3. ↑ works in KDE, not tested in GNOME as it crashes
4. ↑ RHBZ #679903
5. ↑ crash in glx-utils after executing #glxgears (segfault in r300_dri.so)

1. ↑ can't upload file without being logged in
2. ↑ glxgears is running very irregular with lots of stuttering when I have gnome-system-monitor open at the same time
3. ↑ can't change password of liveuser from control panel
4. ↑ surprisingly, this areca raid raid doesn't prevent suspend

1. ↑ When pressing 'Esc' on boot to see what happen, the screen stays black, the top-left corner is marroon and with white dots.
2. ↑ renderchecklog.tar.gz
3. ↑ Works well, synch at 60 FPS, but in some case raises up to 100+ FPS ! This occurs when I put glxgears window in the corner like in this screenshot. When the window stays in the corner, the FPS falls again at 60 FPS on the next '5 seconds'.
4. ↑ The system suspend works, but doesn't resume. The screen stays as 'dpms off'. I must note that I have already this issue on F14.

1. ↑ Fallback mode even after relogin. Running directly gives huge amount of artifacts [7] (FIXME: bugs to file)
2. ↑ It lags sometimes.
3. ↑ File:ABatyiev Renderchecklog Radeon.gz
4. ↑ Unable to run second session — it shows only wallpaper and mouse pointer (movable). Switching by ctrl+alt+f7-8 lags, showing text console
5. ↑ Motherboard doesn't fully support this mode, but it successfully enters and returns suspend mode

1. ↑ with the live image, at the very first login I get the "compat desktop" instead of GNOME shell, with subsequent logins it works
2. ↑ start glxgears, switched to second user, started glxgears, switch back, gnome shell crashes but can't reproduce
3. ↑ desktop is on VC7, not VC1 but I don't think this matters
4. ↑ Trying to suspend via GNOME shell shuts the system down instead of suspending

1. ↑ RHBZ #677842
2. ↑ File:Testday-20110223-zzrough-renderchecklog.gz

1. ↑ smoltSendProfile: abrt: detected unhandled Python exception
2. ↑ RHBZ #677555
3. ↑ fallback
4. ↑ compiz-gtk --replace
5. ↑ https://fedoraproject.org/wiki/File:Nikai-r200-renderchecklog.gz

1. ↑ RHBZ #679326

1. ↑ Some minor artefacts in the video playback
2. ↑ Rotation works but reverting leads to repeated flashing and screen noise - reboot required

1. ↑ RHBZ #123456
2. ↑ RHBZ #234567

1. ↑ very slow
2. ↑ crashed with std::bad_alloc though RAM was free
3. ↑ exiting game crashed X
4. ↑ ran fine, but slowly <15fps
5. ↑ sounds like live environment died during test

1. ↑ runs, but very slow
2. ↑ can't install via liveCD

1. ↑ runs, but very slow

1. ↑ Runs fine but slow

1. ↑ Runs with KDE LiveCD, crash GNOME LiveCD

1. ↑ Runs very slowly
2. ↑ Can't install via liveCD
3. ↑ Slow (~40fps) to very slow (~12fps)
4. ↑ fbo_firecube and terrain : Bus error

1. ↑ FDO#34280

1. ↑ Fonts are broken: [8], very slow 9-12 fps