From Fedora Project Wiki

(grammar)
 
Line 28: Line 28:
** Need to have ModemManager-1.22.0-1.fc40.aarch64 or newer installed, then follow the [https://modemmanager.org/docs/modemmanager/fcc-unlock/ documented] steps to unlock the modem
** Need to have ModemManager-1.22.0-1.fc40.aarch64 or newer installed, then follow the [https://modemmanager.org/docs/modemmanager/fcc-unlock/ documented] steps to unlock the modem
* Virtualization is not yet available. The UEFI is not yet exposing [https://developer.arm.com/documentation/102412/0102/Privilege-and-Exception-levels the EL2 (exception level)], which is required to run VMs
* Virtualization is not yet available. The UEFI is not yet exposing [https://developer.arm.com/documentation/102412/0102/Privilege-and-Exception-levels the EL2 (exception level)], which is required to run VMs
** There has been some work done to unlock it with https://github.com/TravMurav/slbounce. YMMV
* The system does not suspend correctly so you need to poweroff if leaving unused
* The system does not suspend correctly so you need to poweroff if leaving unused
* Wifi address is randomized after each boot
* Wifi address is randomized after each boot

Latest revision as of 22:14, 9 April 2024

Page to keep track of Linux support development for Thinkpad X13s (SoC codename sc8280xp), the first Thinkpad with an Arm CPU.

Most of the following information comes from #aarch64-laptops on OFTC, #fedora-arm on Libera.chat and arm[AT]lists.fedoraproject.org. Upstream information changes daily, so this page may be outdated.

Bootable images

Fedora Rawhide images are bootable as of the 15th of December, 2023, with some additional user interaction.

  • The kernel must be booted with arm64.nopauth clk_ignore_unused pd_ignore_unused rd.driver.blacklist=msm
  • A recent firmware must be on the machine, and the linux/DT mode must be selected in the FW menus.
    • Recommend minimum version:
      • Version: N3HET84W (1.56 )
  • A 6.5 or newer device tree must be placed on the ESP of the internal NVMe disk and named sc8280xp-lenovo-thinkpad-x13s.dtb
  • To boot from USB, modprobe.blacklist=qcom_q6v5_pas must be added to the boot arguments. This keeps the USB from being reset and the storage device from being renamed mid-boot.
  • Once the system is running, installing the x13s copr, will pull in the remaining dependencies and correct a few configuration items:
    • dnf copr enable jlinton/x13s; dnf install x13s
      • Reboot
  • After major kernel updates, it is probably wise for the time being to run
    • cp /boot/dtb-`uname -r`/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb /boot/efi 

Known Problems

  • Audio works but is quiet
  • TPM support is missing
  • 5G Modem
    • Need to have ModemManager-1.22.0-1.fc40.aarch64 or newer installed, then follow the documented steps to unlock the modem
  • Virtualization is not yet available. The UEFI is not yet exposing the EL2 (exception level), which is required to run VMs
  • The system does not suspend correctly so you need to poweroff if leaving unused
  • Wifi address is randomized after each boot

Similar pages