From Fedora Project Wiki
steps taken to build phantomjs on ppc64le
The phantomjs project uses a docker container to perform the build. The instructions say:
$ git clean -xfd . $ docker run -v $PWD:/src debian:wheezy /src/deploy/docker-build.sh
the script is here [1]
However, I could not build a wheezy container for Debian:
[hamzy@pkvmci853 phantomjs]$ sudo su - [root@pkvmci853 ~]# mkdir /wheezy-root [root@pkvmci853 ~]# debootstrap --arch=powerpc wheezy /wheezy-root/ http://ftp.debian.org/debian/ W: Cannot check Release signature; keyring file not available /usr/share/keyrings/debian-archive-keyring.gpg I: Retrieving InRelease I: Retrieving Release I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... ... I: Extracting zlib1g... W: Failure trying to run: chroot /wheezy-root dpkg-deb -f /var/cache/apt/archives/dpkg_1.16.18_powerpc.deb Version W: See /wheezy-root/debootstrap/debootstrap.log for details W: Failure trying to run: chroot /wheezy-root mount -t proc proc /proc W: See /wheezy-root/debootstrap/debootstrap.log for details [root@pkvmci853 ~]# cat /wheezy-root/debootstrap/debootstrap.log chroot: failed to run command 'dpkg-deb': Exec format error chroot: failed to run command 'mount': Exec format error
Building a Jessie container did work:
[hamzy@pkvmci853 phantomjs]$ sudo su - [root@pkvmci853 ~]# mkdir /jessie-root [root@pkvmci853 ~]# debootstrap --arch=ppc64el jessie /jessie-root/ http://ftp.debian.org/debian/ W: Cannot check Release signature; keyring file not available /usr/share/keyrings/debian-archive-keyring.gpg I: Retrieving InRelease I: Retrieving Release I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... ... I: Configuring systemd... I: Base system installed successfully. [root@pkvmci853 ~]# tar -C /jessie-root/ -cJvf jessie-docker.tar.xz --xattrs . [root@pkvmci853 ~]# cat jessie-docker.tar.xz | docker import - jessie-el sha256:d0b376f5dd5397c6f5ded97293485043654a101ba77de54b9c926f974648724d
Running the commands in the above script ran into a problem:
[hamzy@pkvmci853 phantomjs]$ sudo docker run --rm -it --privileged jessie-el /bin/bash
root@8c186e049fe0:/# apt-get update -y
...
Reading package lists... Done
root@8c186e049fe0:/# apt-get install -y build-essential git flex bison gperf python ruby git libfontconfig1-dev
root@8c186e049fe0:/# echo "deb-src http://httpredir.debian.org/debian jessie main" >> /etc/apt/sources.list
root@8c186e049fe0:/# apt-get update -y
root@8c186e049fe0:/# apt-get source openssl
root@8c186e049fe0:/# cd openssl-1.0.1t/
root@8c186e049fe0:/openssl-1.0.1t# export OPENSSL_TARGET='linux-ppc64'
root@8c186e049fe0:/openssl-1.0.1t# export OPENSSL_FLAGS='no-idea no-mdc2 no-rc5 no-zlib enable-tlsext no-ssl2 no-ssl3 no-ssl3-method enable-rfc3779 enable-cms'
root@8c186e049fe0:/openssl-1.0.1t# ./Configure --prefix=/usr --openssldir=/etc/ssl --libdir=lib ${OPENSSL_FLAGS} ${OPENSSL_TARGET}
root@8c186e049fe0:/openssl-1.0.1t# make depend && make && make install
...
make[2]: Entering directory '/openssl-1.0.1t/apps'
( :; LIBDEPS="${LIBDEPS:--L.. -lssl -L.. -lcrypto -ldl}"; LDCMD="${LDCMD:-gcc}"; LDFLAGS="${LDFLAGS:--DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -m64 -DB_ENDIAN -O3 -Wall -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM}"; LIBPATH=`for x in $LIBDEPS; do echo $x; done | sed -e 's/^ *-L//;t' -e d | uniq`; LIBPATH=`echo $LIBPATH | sed -e 's/ /:/g'`; LD_LIBRARY_PATH=$LIBPATH:$LD_LIBRARY_PATH ${LDCMD} ${LDFLAGS} -o ${APPNAME:=openssl} openssl.o verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o ca.o pkcs7.o crl2p7.o crl.o rsa.o rsautl.o dsa.o dsaparam.o ec.o ecparam.o x509.o genrsa.o gendsa.o genpkey.o s_server.o s_client.o speed.o s_time.o apps.o s_cb.o s_socket.o app_rand.o version.o sess_id.o ciphers.o nseq.o pkcs12.o pkcs8.o pkey.o pkeyparam.o pkeyutl.o spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o srp.o ${LIBDEPS} )
/usr/bin/ld: ../libcrypto.a(ppccpuid.o): ABI version 1 is not compatible with ABI version 2 output
/usr/bin/ld: failed to merge target specific data of file ../libcrypto.a(ppccpuid.o)
/usr/bin/ld: ../libcrypto.a(sha1-ppc.o): ABI version 1 is not compatible with ABI version 2 output
/usr/bin/ld: failed to merge target specific data of file ../libcrypto.a(sha1-ppc.o)
...
root@8c186e049fe0:/openssl-1.0.1t# exit
Okay, docker images are located here [2]!
Wheezy seems to be called oldstable-backports. This is probably not a good sign. The next revision, Jessie, also exists.
[hamzy@pkvmci853 phantomjs]$ sudo docker pull ppc64le/debian:oldstable-backports ... 55b804d0d9f8: Pull complete d5724afd0b71: Pull complete Digest: sha256:72e9f4110823ab427d964962371e2e003cb8e09e410018188d712968e6b44947 Status: Downloaded newer image for docker.io/ppc64le/debian:oldstable-backports [hamzy@pkvmci853 phantomjs]$ sudo docker pull ppc64le/debian:jessie
The script to do a docker build here [3] does not work for ppc64el. I created a new version for testing:
[hamzy@pkvmci853 ~]$ cat << __EOF__ > ~/0001-hamzy-docker-build-ppc64el.patch
From a92b52908fb01e07cd7a38b029d8d158e9b88ac4 Mon Sep 17 00:00:00 2001
From: Mark Hamzy <hamzy@us.ibm.com>
Date: Tue, 20 Jun 2017 23:17:00 -0400
Subject: [PATCH] hamzy docker-build-ppc64el
---
deploy/docker-build-ppc64el.sh | 65 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100755 deploy/docker-build-ppc64el.sh
diff --git a/deploy/docker-build-ppc64el.sh b/deploy/docker-build-ppc64el.sh
new file mode 100755
index 0000000..ff11ce4
--- /dev/null
+++ b/deploy/docker-build-ppc64el.sh
@@ -0,0 +1,65 @@
+#!/usr/bin/env bash
+
+set -e
+
+SOURCE_PATH=/src
+BUILD_PATH=$HOME/build
+
+echo "Installing packages for development tools..." && sleep 1
+apt-get -y update
+apt-get install -y build-essential g++-4.8 gcc-4.8 git flex bison gperf python ruby git libfontconfig1-dev
+echo
+
+echo "Setting gcc version 4.8 to have priority against the auto installed 4.9"
+update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.9 10
+update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.8 20
+update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 10
+update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 20
+
+echo "Preparing to download Debian source package..."
+echo "deb-src http://deb.debian.org/debian oldstable main" >> /etc/apt/sources.list
+apt-get -y update
+echo
+
+OPENSSL_TARGET='debian-ppc64el'
+if [ `getconf LONG_BIT` -eq 32 ]; then
+ OPENSSL_TARGET='linux-generic32'
+fi
+echo "Recompiling OpenSSL for ${OPENSSL_TARGET}..." && sleep 1
+apt-get source openssl
+
+cd openssl-1.0.1t/
+./Configure --prefix=/usr --openssldir=/etc/ssl --libdir=lib ${OPENSSL_FLAGS} ${OPENSSL_TARGET}
+make depend && make && make install
+cd ..
+echo
+
+echo "Building the static version of ICU library..." && sleep 1
+apt-get source icu
+cd icu-52.1/source/
+./configure --prefix=/usr --enable-static --disable-shared
+make && make install
+cd ..
+echo
+
+echo "Recreating the build directory $BUILD_PATH..."
+rm -rf $BUILD_PATH && mkdir -p $BUILD_PATH
+echo
+
+echo "Transferring the source: $SOURCE_PATH -> $BUILD_PATH. Please wait..."
+cd $BUILD_PATH && cp -rp $SOURCE_PATH . && cd src
+echo
+
+echo "Compiling PhantomJS..." && sleep 1
+python build.py --confirm --release --qt-config="-no-pkg-config" --git-clean-qtbase --git-clean-qtwebkit
+echo
+
+echo "Stripping the executable..." && sleep 1
+ls -l bin/phantomjs
+strip bin/phantomjs
+echo "Copying the executable..." && sleep 1
+ls -l bin/phantomjs
+cp bin/phantomjs $SOURCE_PATH
+echo
+
+echo "Finished."
--
1.8.3.1
__EOF__
The next problem is that the master version in git does not support the docker build anymore:
We removed it because we no longer need bundled submodules (QtBase and QtWebKit). We are still working on the updated instruction how to build PhantomJS from master. But you always can checkout tag 2.1 and build it.
from here [4]
So, checking out the project like:
[hamzy@pkvmci853 ~]$ git clone https://github.com/ariya/phantomjs.git [hamzy@pkvmci853 phantomjs]$ git checkout 2.1 Branch 2.1 set up to track remote branch 2.1 from origin. Switched to a new branch '2.1' [hamzy@pkvmci853 phantomjs]$ git am ~/0001-hamzy-docker-build-ppc64el.patch Applying: hamzy docker-build-ppc64el
And running the build like:
[hamzy@pkvmci853 phantomjs]$ sudo docker run -v $PWD:/src -it --privileged --name phantomjs_ppc64el docker.io/ppc64le/debian:oldstable-backports /src/deploy/docker-build-ppc64el.sh ... Copying the executable... -rwxr-xr-x. 1 root root 78394384 Jun 21 04:04 bin/phantomjs Finished. ... [hamzy@pkvmci853 phantomjs]$ sudo docker cp phantomjs_ppc64el:/src/phantomjs . [hamzy@pkvmci853 phantomjs]$ ./phantomjs ./phantomjs: /lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by ./phantomjs) [hamzy@pkvmci853 phantomjs]$ ls -l /lib64/libstdc++.so.6 lrwxrwxrwx. 1 root root 19 May 30 17:21 /lib64/libstdc++.so.6 -> libstdc++.so.6.0.19 [hamzy@pkvmci853 phantomjs]$ rpm -qf /lib64/libstdc++.so.6 libstdc++-4.8.5-11.el7.ppc64le [hamzy@pkvmci853 phantomjs]$ rpm -q libstdc++-4.8.5-11.el7.ppc64le --provides ... libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.1)(64bit) libstdc++.so.6(CXXABI_1.3.2)(64bit) libstdc++.so.6(CXXABI_1.3.3)(64bit) libstdc++.so.6(CXXABI_1.3.4)(64bit) libstdc++.so.6(CXXABI_1.3.5)(64bit) libstdc++.so.6(CXXABI_1.3.6)(64bit) libstdc++.so.6(CXXABI_1.3.7)(64bit) ...
Comes with the next two problems. 1) The program is not being built for 64-bit code and 2) The libstdc++ libraries are slightly newer than what exists on CentOS7.
Trying a backlevel gcc:
root@bdd8cc64c5ba:/# apt-get install -y build-essential g++-4.8 gcc-4.8 git flex bison gperf python ruby git libfontconfig1-dev root@bdd8cc64c5ba:/# update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.9 10 update-alternatives: using /usr/bin/g++-4.9 to provide /usr/bin/g++ (g++) in auto mode root@bdd8cc64c5ba:/# update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.8 20 update-alternatives: using /usr/bin/g++-4.8 to provide /usr/bin/g++ (g++) in auto mode root@bdd8cc64c5ba:/# update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 10 update-alternatives: using /usr/bin/gcc-4.9 to provide /usr/bin/gcc (gcc) in auto mode root@bdd8cc64c5ba:/# update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 20 update-alternatives: using /usr/bin/gcc-4.8 to provide /usr/bin/gcc (gcc) in auto mode root@bdd8cc64c5ba:/# gcc --version gcc (Debian 4.8.4-1) 4.8.4
Came with the following problem during the build:
... OpenSSL support cannot be enabled due to functionality tests! Turn on verbose messaging (-v) to /root/build/src/src/qt/qtbase/configure to see the final report. If you believe this message is in error you may use the continue switch (-continue) to /root/build/src/src/qt/qtbase/configure to continue. ERROR: Failed to build PhantomJS! Configuration of Qt Base failed. ...