From Fedora Project Wiki
No edit summary
(Redirect Package Maintainer wiki links to docs.fp.o)
 
(19 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{autolang|base=yes}}
{{autolang|base=yes}}


[[Category:Fedora ARM]][[Category:Fedora 23]]
[[Category:Fedora ARMv7]][[Category:Fedora 23]]
 
{{draft}}


=Fedora 23 for ARM=
=Fedora 23 for ARM=
Line 23: Line 21:
We need your help to make Fedora 23 the best release yet, so please take some time to download and try out the and make sure the things that are important to you are working. If you find a bug, [[How_to_file_a_bug_report|please report it]] – every bug you uncover is a chance to improve the experience for millions of Fedora users worldwide.  
We need your help to make Fedora 23 the best release yet, so please take some time to download and try out the and make sure the things that are important to you are working. If you find a bug, [[How_to_file_a_bug_report|please report it]] – every bug you uncover is a chance to improve the experience for millions of Fedora users worldwide.  


Together, we can make Fedora rock-solid. We have a culture of coordinating new features and pushing fixes [[Staying_close_to_upstream_projects|upstream]] as much as feasible, and your feedback will help improve not only Fedora but Linux and free software on the whole.
Together, we can make Fedora rock-solid. We have a culture of coordinating new features and pushing fixes [https://docs.fedoraproject.org/en-US/package-maintainers/Staying_Close_to_Upstream_Projects/ upstream] as much as feasible, and your feedback will help improve not only Fedora but Linux and free software on the whole.


== Fedora-Wide Changes ==
== Fedora-Wide Changes ==
Line 34: Line 32:


====Overview of Hardware Support Status====
====Overview of Hardware Support Status====
* [http://fedoraproject.org/wiki/Architectures/ARM/F23/Installation/Hardware_Status Hardware Support Status]
* [[Architectures/ARM/F23/Installation/Hardware_Status|Hardware Support Status]]


=Download the Disk Image & Copy to Media=
=Download the Disk Image & Copy to Media=
Line 83: Line 81:
         # for example /dev/sdc, /dev/sdg, ...
         # for example /dev/sdc, /dev/sdg, ...
         # read /var/log/messages to learn which device was assigned to your media
         # read /var/log/messages to learn which device was assigned to your media
  xzcat Fedora-$TYPE-armhfp-23_Beta-1-sda.raw.xz | sudo dd of=$MEDIA; sync
  xzcat Fedora-$TYPE-armhfp-23-10-sda.raw.xz | sudo dd of=$MEDIA; sync
After writing the image, read the new partition table and mount the root partition
After writing the image, read the new partition table and mount the root partition
  partprobe $MEDIA
  partprobe $MEDIA
Line 105: Line 103:


===For the BeagleBone ( Black & White ) ===
===For the BeagleBone ( Black & White ) ===
{{admon/warning|IMPORTANT | You need to use the internal MMC to boot Fedora 23 as is. As a temporary work around, you can replace the initramfs included on the images with files found here - http://pwhalen.fedorapeople.org/Fedora/23/Beta/beaglebone/ to boot from mSD. The issue and temporary work around are described on the mailing list - http://lists.fedoraproject.org/pipermail/arm/2015-August/009814.html }}
 
  MEDIA= #/dev/<location-of-your-media>
  MEDIA= #/dev/<location-of-your-media>
         # for example /dev/sdc, /dev/sdg, ...
         # for example /dev/sdc, /dev/sdg, ...
Line 130: Line 128:


===For the CompuLab TrimSlice===
===For the CompuLab TrimSlice===
{{admon/warning|IMPORTANT | You must use the latest Device Tree enabled U-Boot to boot the Fedora 23 BetaTrimslice image, which you can find [http://www.trimslice.com/wiki/index.php/Trim-Slice_Firmware_Updater#v2012.04-1.02 here]. And environmental variables described [http://www.trimslice.com/wiki/index.php/Trim-Slice_Firmware_Updater#U-Boot_environment_variable here]. <b>Failure to do so will result in a non-booting system. Trimslice currently does not boot from MMC due to a time out when reading the initramfs</b>}}
{{admon/warning|IMPORTANT | You must use the latest Device Tree enabled U-Boot to boot the Fedora 23 Trimslice image, which you can find [http://www.trimslice.com/wiki/index.php/Trim-Slice_Firmware_Updater#v2012.04-1.02 here]. And environmental variables described [http://www.trimslice.com/wiki/index.php/Trim-Slice_Firmware_Updater#U-Boot_environment_variable here]. <b>Failure to do so will result in a non-booting system. Trimslice currently does not boot from MMC due to a time out when reading the initramfs</b>}}
The Trimslice requires no additional steps, U-Boot is included on the device.
The Trimslice requires no additional steps, U-Boot is included on the device.


=== For the Wandboard (Freescale i.MX6) ===
=== For the Wandboard (Freescale i.MX6) ===
Note - The Wandboard includes a Solo, Dual, and Quad core configuration.  Determine your hardware configuration and use the appropriate value. While the Wandboard Quad has been tes
Note - The Wandboard includes a Solo, Dual, and Quad core configuration.  With u-boot 2015.07 and later, the same boot-loader binary can be used for all flavors.
ted and confirmed working, the Solo and Dual core models should also work as well. The Wandboard Solo uses the same dtb as the Dual(imx6dl-wandboard.dtb).
Copy the U-boot for the Wandboard hardware:
Copy the U-boot for the Wandboard hardware in use:
BOARD= # Choose 'solo', 'dl' or 'quad'
  MEDIA= #/dev/<location-of-your-media>
  MEDIA= #/dev/<location-of-your-media>
         # for example /dev/sdc, /dev/sdg, ...
         # for example /dev/sdc, /dev/sdg, ...
         # read /var/log/messages to learn which device was assigned to your media
         # read /var/log/messages to learn which device was assigned to your media
  sudo dd if=/tmp/root/usr/share/uboot/wandboard_$BOARD/u-boot.imx of=$MEDIA bs=1k seek=1 conv=fsync; sync
  sudo dd if=/tmp/root/usr/share/uboot/wandboard/SPL of=$MEDIA bs=1k seek=1 conv=fsync; sync
sudo dd if=/tmp/root/usr/share/uboot/wandboard/u-boot.img of=$MEDIA bs=1k seek=69 conv=fsync; sync
Remove the media and insert into the Wandboard and boot.
Remove the media and insert into the Wandboard and boot.
{{admon/warning|IMPORTANT |<b>MicroSD for booting is located under the heatsink</b>}}
{{admon/warning|IMPORTANT |<b>MicroSD for booting is located under the heatsink</b>}}
Line 165: Line 162:
<pre>
<pre>
TYPE= # Type of image used. (eg Minimal, KDE, Xfce, SoaS, MATE)
TYPE= # Type of image used. (eg Minimal, KDE, Xfce, SoaS, MATE)
unxz Fedora-$TYPE-armhfp-23_Beta-1-sda.raw.xz
unxz Fedora-$TYPE-armhfp-23-10-sda.raw.xz
</pre>
</pre>
Install 'libguestfs-tools' to use virt-builder with [[dnf|DNF]] or YUM:
Install 'libguestfs-tools' to use virt-builder:
<pre>sudo dnf install -y libguestfs-tools
<pre>sudo dnf install -y libguestfs-tools</pre>
sudo yum install -y libguestfs-tools</pre>
Extract the kernel and initramfs for use with booting.
Extract the kernel and initramfs for use with booting.
<pre>
<pre>
virt-builder --get-kernel Fedora-$TYPE-armhfp-23_Beta-1-sda.raw
virt-builder --get-kernel Fedora-$TYPE-armhfp-23-10-sda.raw
</pre>
</pre>
Move the files to the default libvirt image location:
Move the files to the default libvirt image location:
  sudo mv Fedora-$TYPE-armhfp-23_Beta-1-sda.raw vmlinuz-4.2.3-300.fc23.armv7hl initramfs-4.2.3-300.fc23.armv7hl.img /var/lib/libvirt/images/
  sudo mv Fedora-$TYPE-armhfp-23-10-sda.raw vmlinuz-4.2.3-300.fc23.armv7hl initramfs-4.2.3-300.fc23.armv7hl.img /var/lib/libvirt/images/


==== Using Virt-Manager (Graphical ) ====
==== Using Virt-Manager (Graphical ) ====
Line 192: Line 188:
sudo virt-install \
sudo virt-install \
     --name Fedora-$TYPE-armhfp-23_--ram 1024 --arch armv7l --import --os-variant fedora22 \
     --name Fedora-$TYPE-armhfp-23_--ram 1024 --arch armv7l --import --os-variant fedora22 \
     --disk /var/lib/libvirt/images/Fedora-$TYPE-armhfp-23_Beta-1-sda.raw \
     --disk /var/lib/libvirt/images/Fedora-$TYPE-armhfp-23-10-sda.raw \
     --boot kernel=/var/lib/libvirt/images/vmlinuz-4.2.3-300.fc23.armv7hl,initrd=/var/lib/libvirt/images/initramfs-4.2.3-300.fc23.armv7hl.img,kernel_args="console=ttyAMA0 rw root=LABEL=_/ rootwait"
     --boot kernel=/var/lib/libvirt/images/vmlinuz-4.2.3-300.fc23.armv7hl,initrd=/var/lib/libvirt/images/initramfs-4.2.3-300.fc23.armv7hl.img,kernel_args="console=ttyAMA0 rw root=LABEL=_/ rootwait"
</pre>
</pre>
Line 200: Line 196:


For example to increase the image size by 10GB you can issue:
For example to increase the image size by 10GB you can issue:
   qemu-img resize Fedora-$TYPE-armhfp-23_Beta-1-sda.raw +10G
   qemu-img resize Fedora-$TYPE-armhfp-23-10-sda.raw +10G


=== Interactive Network Installation ===
=== Interactive Network Installation ===
The below example uses the 'vexpress-a15' machine type and dtb, this can be substituted with 'vexpress-a9'. Using 'vexpress-a15' will allow the use of more RAM.
This example will create an 8Gb disk image in the libvirt images directory.  
<pre>
<pre>
# vexpress-a15
# Create the disk image
qemu-img create Fedora-QEMU-armhfp-23_Beta-sda.raw $SIZE #add a size EG 8G
# retrieve DTB
wget https://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/images/pxeboot/dtb/vexpress-v2p-ca15-tc1.dtb
# move images to libvirt directory (to avoid a permission error)
sudo mv Fedora-QEMU-armhfp-23_Beta-sda.raw vexpress-v2p-ca15-tc1.dtb /var/lib/libvirt/images/
# Begin Install
sudo virt-install \
sudo virt-install \
--name Fedora-QEMU-armhfp-23_\
    --name f23-armhfp --ram 2048 --arch armv7l --os-variant fedora22\
--ram 2048         \
    --disk /var/lib/libvirt/images/f23-armhfp.raw,bus=virtio,format=raw,size=8 \
--arch armv7l     \
    --location=http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/ \
--machine vexpress-a15 \
    --extra-args="console=ttyAMA0 rw"
--location=https://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/ \
 
--disk /var/lib/libvirt/images/Fedora-QEMU-armhfp-23_Beta-sda.raw \
--extra-args="console=ttyAMA0 rw" \
--os-variant fedora22            \
--graphics none \
--boot dtb=/var/lib/libvirt/images/vexpress-v2p-ca15-tc1.dtb
</pre>
</pre>
Complete a Text or VNC Installation choosing a software packge and partitioning scheme (note when choosing LVM or BTRFS you will need to edit the kernel arguments appropriately). T he system will attempt to reboot but fail until the next step is completed.  
Complete a Text or VNC Installation choosing a software packge and partitioning scheme. The system will attempt to reboot but fail until the next step is completed.
 
<pre>
sudo virt-builder --get-kernel /var/lib/libvirt/images/f23-armhfp.raw -o /var/lib/libvirt/images/
</pre>
==== Virt-Manager ====
==== Virt-Manager ====
* Open Virt-Manager and select the image created above. Click on "Edit-> Virtual Machine Details -> View -> Details"
* Open Virt-Manager and select the image created above. Click on "Edit-> Virtual Machine Details -> View -> Details"
* Under "Boot Options", add the kernel, initramfs (the DTB should point to the correct path).
* Under "Boot Options", add the kernel, initramfs
* For kernel args add (note- if custom partitioning was used for the installation you will to make adjustments to 'root='):
* Use virt-cat to get the appropriate kernel args.
<pre>
<pre>
# If you selected Standard Partitioning
sudo virt-cat -a /var/lib/libvirt/images/f23-armhfp.raw /boot/extlinux/extlinux.conf
console=ttyAMA0,115200n8 rw root=/dev/vda3 rootwait
# If you selected LVM
console=ttyAMA0,115200n8 rw root=/dev/mapper/fedora--server-root rootwait
</pre>
</pre>


Line 245: Line 230:
To resize the root partition use 'gparted' on a Fedora host.
To resize the root partition use 'gparted' on a Fedora host.


= Upgrade using Fedup =
= Upgrade using DNF =
It is also possible to upgrade to Fedora 23 from an existing Fedora 21 installation (previous releases may also work but have not been tested). The upgrade will work as intended with Enterprise hardware (Calxeda Highbank and Midway systems), ARM development boards will currently require an additional step of installing the kernel used in the  ( this is to ensure the right DTB is used, previous DTB's are incompatible with the Fedora 23 release kernel). To begin upgrade the current kernel:
It is also possible to upgrade to Fedora 23 from an existing Fedora 22 installation (previous releases may also work but have not been tested).
<pre>
<pre>
# yum update the kernel package first
# fully update the system
yum update http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/Packages/k/kernel-4.2.3-300.fc23.armv7hl.rpm \
dnf update -y
http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/Packages/k/kernel-core-4.2.3-300.fc23.armv7hl.rpm \
# install the upgrade plugin
http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/Packages/k/kernel-modules-4.2.3-300.fc23.armv7hl.rpm
dnf install dnf-plugin-system-upgrade
 
#upgrade
# lpae kernel
dnf system-upgrade download --releasever=23
yum update http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/Packages/k/kernel-lpae-4.2.3-300.fc23.armv7hl.rpm \
http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/Packages/k/kernel-lpae-core-4.2.3-300.fc23.armv7hl.rpm \
http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/Packages/k/kernel-lpae-modules-4.2.3-300.fc23.armv7hl.rpm
 
# IMPORTANT: Reboot to the new kernel (if you do not, you will need to hand edit /etc/extlinux.conf to use the new dtb-4.2.3-300.fc23.armv7hl).
# install fedup
yum install fedup
 
# run network upgrade to F23
fedup --network 23 --instrepo https://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/
</pre>
</pre>


Line 271: Line 246:
* On some hardware, initial setup runs on serial console (initial-setup-text) rather than graphical on Desktop enabled images. If no serial console is available, restarting the system may start the graphical version. Removing the symlink for initial-setup-text will ensure the correct version is run.  
* On some hardware, initial setup runs on serial console (initial-setup-text) rather than graphical on Desktop enabled images. If no serial console is available, restarting the system may start the graphical version. Removing the symlink for initial-setup-text will ensure the correct version is run.  


For a list of all common bugs please visit - http://fedoraproject.org/wiki/Common_F23_bugs .
For a list of all common bugs please visit - [[Common_F23_bugs]].


= FAQ =
= FAQ =

Latest revision as of 11:45, 9 October 2021

Fedora 23 for ARM

The Fedora ARM team is pleased to announce that Fedora 23 for the ARM Architecture is now available for download from:

Fedora 23 for ARM includes a number of images providing for a variety of desktop choices (including MATE, XFCE, LXDE, SOAS), as well as a minimal and Server image that does not include the desktop. Any of these images can be used with QEMU on an x86_64 desktop to emulate a fully functional ARM environment.

The image-based installation process involves downloading an image file (depending upon the desktop/non-desktop option desired), inserting removable media into a "host" system (e.g. an ARM or x86_64 PC class desktop, laptop, etc.) and performing a few simple commands to write this image onto the media. This media is then used by the ARM "target" system to boot the Fedora 23 environment.

What is the release?

The release contains all the exciting features of Fedora 23's editions in a form that anyone can help test. This testing, guided by the Fedora QA team, helps us target and identify bugs. When these bugs are fixed, we make a release available. A release is code-complete and bears a very strong resemblance to the third and final release. The final release of Fedora 23 is expected in October.

We need your help to make Fedora 23 the best release yet, so please take some time to download and try out the and make sure the things that are important to you are working. If you find a bug, please report it – every bug you uncover is a chance to improve the experience for millions of Fedora users worldwide.

Together, we can make Fedora rock-solid. We have a culture of coordinating new features and pushing fixes upstream as much as feasible, and your feedback will help improve not only Fedora but Linux and free software on the whole.

Fedora-Wide Changes

Fedora 23 includes a number of changes that will improve all of the editions. For example, Fedora 23 is making use of compiler flags to help improve security by "hardening" the binaries against memory corruption vulnerabilities, buffer overflows, and so on. This is a "behind the scenes" change that most users won't notice through normal use of a Fedora edition, but should help provide additional system security.

Likewise, Fedora 23 has disabled SSL3 and RC4 by default due to known vulnerabilities in the protocols. This means all applications that use GNUTLS and OpenSSL libraries have had the SSL3 protocol and RC4 cipher disabled.

Fedora 23 also includes support for Unicode 8.0, which includes new emojis, and improvements in sorting Unicode text and processing non-ASCII URLs.

Overview of Hardware Support Status

Download the Disk Image & Copy to Media

The image-based installation process involves downloading an image file (depending upon desktop/non-desktop option desired), inserting removable media into a "host" system (e.g. an ARM or x86_64 PC class desktop, laptop, etc.) and performing a few simple commands to write this image onto the media. This media is then used by the ARM "target" system to boot the Fedora 23 environment.

After writing the image and correct U-boot file(s), insert the media into the target platform and boot.

Scripted

Note
The examples provided here are from a Fedora 20/21/22 host and may need to be adjusted depending on your host environment.

Execute the following script as a user with sudo privileges. It will copy the selected disk image and write the appropriate U-Boot for the target hardware platform. Optionally you can also enable and disable SE Linux and remove the root password requirement (allowing log in without completing initial setup). To add a board not listed, simply create a bash scriptlet with the commands needed to copy U-Boot to media and add to the 'boards.d' directory.

dnf install fedora-arm-installer   #Fedora 22 and above
yum install fedora-arm-installer   #Older releases
Usage: fedora-arm-image-installer <options>

   --image=IMAGE    - xz compressed image file name
   --target=TARGET  - target board
		      [A10-OLinuXino-Lime|A20-OLinuXino-Lime|A20-OLinuXino-Lime2|A20-OLinuXino_MICRO|am335x_boneblack|Bananapi|Bananapro|cm_fx6|Cubieboard|Cubieboard2|Cubietruck|jetson-tk1|Linksprite_pcDuino|Linksprite_pcDuino3|Linksprite_pcDuino3_Nano|Mele_A1000|Mini-X|mx6cuboxi|none|novena|omap4_panda|omap5_uevm|riotboard|trimslice|wandboard]
   --media=DEVICE   - media device file (/dev/[sdX|mmcblkX])
   --selinux=ON/OFF - Turn SELinux off/on as needed
   --norootpass     - Remove the root password
    -y		    - Assumes yes, will not wait for confirmation
   --version	    - Display version and exit
   --resizefs	    - Resize root filesystem to fill media device

Example: fedora-arm-image-installer --image=Fedora-Rawhide.xz --target=panda --media=/dev/mmcblk0 --selinux=OFF

Manual

Choose a disk image.

http://download.fedoraproject.org/pub/fedora/linux/releases/23/Images/armhfp/

Write the image to your media

TYPE=  # options include KDE, LXDE, XFCE, SoaS, Mate and Minimal
MEDIA= #/dev/<location-of-your-media>
       # for example /dev/sdc, /dev/sdg, ...
       # read /var/log/messages to learn which device was assigned to your media
xzcat Fedora-$TYPE-armhfp-23-10-sda.raw.xz | sudo dd of=$MEDIA; sync

After writing the image, read the new partition table and mount the root partition

partprobe $MEDIA
PART=  #/dev/<location-of-your-media><partition-number>
       # this needs to be the root partition on the written media
       # for example /dev/sdc3, /dev/sdg3, /dev/mmcblk0p3, ...
mkdir /tmp/root; sudo mount $PART /tmp/root

Copy the appropriate U-Boot files for your target hardware listed below.

Write U-Boot to Media

Follow theses steps to write the appropriate U-Boot for your Hardware.

For the Banana Pi / CubieBoard / CubieBoard2 / CubieTruck (Allwinner A20)

Note - It is important to use the use format shown below for your target.

TARGET= # Bananapi , CubieBoard , Cubieboard2 , Cubietruck
        # Linksprite_pcDuino , Linksprite_pcDuino3 , Linksprite_pcDuino3_Nano
MEDIA= #/dev/<location-of-your-media>
       # for example /dev/sdc, /dev/sdg, ...
       # read /var/log/messages to learn which device was assigned to your media
sudo dd if=/tmp/root/usr/share/uboot/$TARGET/u-boot-sunxi-with-spl.bin of=$MEDIA bs=1024 seek=8 conv=fsync,notrunc

Media should now be ready to boot, insert into the device and boot.

For the BeagleBone ( Black & White )

MEDIA= #/dev/<location-of-your-media>
       # for example /dev/sdc, /dev/sdg, ...
       # read /var/log/messages to learn which device was assigned to your media
sudo dd if=/tmp/root/usr/share/uboot/am335x_boneblack/MLO of=$MEDIA count=1 seek=1 conv=notrunc bs=128k
sudo dd if=/tmp/root/usr/share/uboot/am335x_boneblack/u-boot.img of=$MEDIA count=2 seek=1 conv=notrunc bs=384k

Media should now be ready to boot on the BeagleBone. Insert into the device and boot. To boot the Fedora 23 version of U-Boot on MicroSD you will need to hold the "User Boot" button (located near the MicroSD slot) when the device is powered on.

Copying Fedora U-Boot to eMMC on the Beaglebone Black

To Copy the Fedora U-Boot to the eMMC on the Beaglebone Black execute the following steps:

# mount emmc boot partition 
mkdir /tmp/emmc; mount /dev/mmcblk1p1 /tmp/emmc

# optionally back up original U-Boot
mkdir /tmp/emmc/orig-uboot; cp /tmp/emmc/{MLO,u-boot.img} /tmp/emmc/orig-uboot/

# copy Fedora U-Boot
cp /usr/share/uboot/am335x_boneblack/{MLO,u-boot.img} /tmp/emmc/

Once completed you will no longer need to press the "User Boot" button to select the Fedora U-Boot.

For the CompuLab TrimSlice

IMPORTANT
You must use the latest Device Tree enabled U-Boot to boot the Fedora 23 Trimslice image, which you can find here. And environmental variables described here. Failure to do so will result in a non-booting system. Trimslice currently does not boot from MMC due to a time out when reading the initramfs

The Trimslice requires no additional steps, U-Boot is included on the device.

For the Wandboard (Freescale i.MX6)

Note - The Wandboard includes a Solo, Dual, and Quad core configuration. With u-boot 2015.07 and later, the same boot-loader binary can be used for all flavors. Copy the U-boot for the Wandboard hardware:

MEDIA= #/dev/<location-of-your-media>
       # for example /dev/sdc, /dev/sdg, ...
       # read /var/log/messages to learn which device was assigned to your media
sudo dd if=/tmp/root/usr/share/uboot/wandboard/SPL of=$MEDIA bs=1k seek=1 conv=fsync; sync
sudo dd if=/tmp/root/usr/share/uboot/wandboard/u-boot.img of=$MEDIA bs=1k seek=69 conv=fsync; sync

Remove the media and insert into the Wandboard and boot.

IMPORTANT
MicroSD for booting is located under the heatsink

For the Pandaboard

MEDIA= #/dev/<location-of-your-media>
       # for example /dev/sdc, /dev/sdg, ...
       # read /var/log/messages to learn which device was assigned to your media
sudo dd if=/tmp/root/usr/share/uboot/panda/MLO of=$MEDIA count=1 seek=1 conv=notrunc bs=128k
sudo dd if=/tmp/root/usr/share/uboot/panda/u-boot.img of=$MEDIA count=2 seek=1 conv=notrunc bs=384k

Media should now be ready to boot on the Pandaboard. Insert into the device and boot.

For the Jetson TK1

IMPORTANT
Requires a recent version of U-Boot

The Jetson TK1 requires no additional steps, U-Boot is included on the device.

For Versatile Express Emulation with QEMU

No ARM hardware? No problem! Even without hardware, it is possible to run the Fedora for ARM images using the QEMU emulator program. Any image can be used, and you can choose a scr ipt method or manual depending on your preference.

Using an Existing Disk Image

Choose a disk image.

http://download.fedoraproject.org/pub/fedora/linux/releases/23/Images/armhfp/

Extract the image:

TYPE= # Type of image used. (eg Minimal, KDE, Xfce, SoaS, MATE)
unxz Fedora-$TYPE-armhfp-23-10-sda.raw.xz

Install 'libguestfs-tools' to use virt-builder:

sudo dnf install -y libguestfs-tools

Extract the kernel and initramfs for use with booting.

virt-builder --get-kernel Fedora-$TYPE-armhfp-23-10-sda.raw

Move the files to the default libvirt image location:

sudo mv Fedora-$TYPE-armhfp-23-10-sda.raw vmlinuz-4.2.3-300.fc23.armv7hl initramfs-4.2.3-300.fc23.armv7hl.img /var/lib/libvirt/images/

Using Virt-Manager (Graphical )

  • Start virt-manager, connect to 'QEMU', click the 'New VM' icon
  • On the first page, under 'Architecture Options' select 'arm'. The 'virt' machine type should be selected automatically
  • Select the 'Import install' option, go to the next page
  • Browse to the disk image, kernel, and initrd we moved in the previous step.
  • Set kernel args as: console=ttyAMA0 rw root=LABEL=_/ rootwait
  • Set the OS as Fedora 22.
  • Continue with the OS defaults, complete the install.

The guest should shortly start booting, and you should see text console output. After a bit of a wait, it should hit a text mode 'initial setup' where you can set a root password. To boot (you will need to determine the kernel version used in the disk image):

Using 'virt-install' (command line)

sudo virt-install \
    --name Fedora-$TYPE-armhfp-23_--ram 1024 --arch armv7l --import --os-variant fedora22 \
    --disk /var/lib/libvirt/images/Fedora-$TYPE-armhfp-23-10-sda.raw \
    --boot kernel=/var/lib/libvirt/images/vmlinuz-4.2.3-300.fc23.armv7hl,initrd=/var/lib/libvirt/images/initramfs-4.2.3-300.fc23.armv7hl.img,kernel_args="console=ttyAMA0 rw root=LABEL=_/ rootwait"

Expanding the Disk Image

You can easily expand the root partition of the disk image using qemu-img.

For example to increase the image size by 10GB you can issue:

 qemu-img resize Fedora-$TYPE-armhfp-23-10-sda.raw +10G

Interactive Network Installation

This example will create an 8Gb disk image in the libvirt images directory.

sudo virt-install \
    --name f23-armhfp --ram 2048 --arch armv7l --os-variant fedora22\
    --disk /var/lib/libvirt/images/f23-armhfp.raw,bus=virtio,format=raw,size=8 \
    --location=http://dl.fedoraproject.org/pub/fedora/linux/releases/23/Server/armhfp/os/ \
    --extra-args="console=ttyAMA0 rw"

Complete a Text or VNC Installation choosing a software packge and partitioning scheme. The system will attempt to reboot but fail until the next step is completed.

sudo virt-builder --get-kernel /var/lib/libvirt/images/f23-armhfp.raw -o /var/lib/libvirt/images/

Virt-Manager

  • Open Virt-Manager and select the image created above. Click on "Edit-> Virtual Machine Details -> View -> Details"
  • Under "Boot Options", add the kernel, initramfs
  • Use virt-cat to get the appropriate kernel args.
sudo virt-cat -a /var/lib/libvirt/images/f23-armhfp.raw /boot/extlinux/extlinux.conf

Booting for the First Time

Initial-setup

  • During the first boot the system will launch the 'initial-setup' utility. For graphical images this will occur on the display, for minimal images this will occur on the serial console. Failure to complete the initial-setup will prevent logging into the system. To log in to the root account without completing the initial-setup you will need to minimally edit '/etc/passwd' file and remove the 'x' from the line beginning with 'root' (this will allow you to log into the root account without entering a password).
    • NOTE - currently there is a timing issue with initial-setup, even though a display is connected, it may be run as text on the serial console. This is often resolved by rebooting the system.

Resize the Root Filesystem

To resize the root partition use 'gparted' on a Fedora host.

Upgrade using DNF

It is also possible to upgrade to Fedora 23 from an existing Fedora 22 installation (previous releases may also work but have not been tested).

# fully update the system
dnf update -y
# install the upgrade plugin
dnf install dnf-plugin-system-upgrade
#upgrade
dnf system-upgrade download --releasever=23

Known Issues & Usage Tips

  • Display is not currently working in vexpress emulation.
  • On some hardware, initial setup runs on serial console (initial-setup-text) rather than graphical on Desktop enabled images. If no serial console is available, restarting the system may start the graphical version. Removing the symlink for initial-setup-text will ensure the correct version is run.

For a list of all common bugs please visit - Common_F23_bugs.

FAQ

  • QUESTION : How do I use Fedora ARM when I have no serial cable or display?
    • ANSWER: Though not recommended it is possible to use Fedora ARM without a serial cable or display. When doing so you may want to limit updates to reduce the possibility of not being able to boot. (This example is from a Fedora 22 system, you may need to adjust the mounts used).
USER= # your user account
rm /run/media/$USER/__/etc/systemd/system/graphical.target.wants/initial-setup-graphical.service
rm /run/media/$USER/__/etc/systemd/system/multi-user.target.wants/initial-setup-text.service
mkdir /run/media/$USER/__/root/.ssh/
cat /home/$USER/.ssh/id_rsa.pub >> /run/media/$USER/__/root/.ssh/authorized_keys
chmod -R u=rwX,o=,g= /run/media/$USER/__/root/.ssh/

Give the system a few minutes to boot, when it obtains an IP you should be able to ssh to the root account.

  • QUESTION : Why does 'yum update' fail?
    • ANSWER: The system time might be incorrect, please ensure it is correct.