From Fedora Project Wiki

No edit summary
No edit summary
Line 17: Line 17:
# Disable cron:
# Disable cron:
#:<pre># systemctl stop crond.service</pre>
#:<pre># systemctl stop crond.service</pre>
|actions=
{{admon/note|Run from battery|This test needs to be run on battery (laptops) or with connected external wattmeter. In case you have laptop and also use external wattmeter please disconnect battery.}}
{{admon/note|Battery charge level|If you are running on battery, please recharge your battery to full capacity before running this test. If you don't have enough time, you can skip the recharging. }}
{{admon/note|Measurement problems|If it complains that the test cannot be run on your computer, use external wattmeter or skip this test.}}
{{admon/note|Screen blanking|If the screen blanks during the measurement, unblank it by e.g. mouse movement.}}


Plese select and follow the paragraph bellow regarding your video card HW:
Plese select and follow the paragraph bellow regarding your video card HW:


==Intel==
==Intel==
 
xx
# Disable tuned by:
#:<pre># systemctl stop tuned.service</pre>
# If you have laptop running on battery, run the following command:
#:<pre># pmtd-measure</pre>
#: Otherwise connect your external wattmeter and measure energy consumed in 15 minute interval.
# Do not touch your computer until the test completes (15 minutes).
# Write the output to the results table.


==Nvidia==
==Nvidia==
xx


# Disable tuned by:
==ATI / AMD (Radeon)==
#:<pre># systemctl stop tuned.service</pre>
xx
# If you have laptop running on battery, run the following command:
#:<pre># pmtd-measure</pre>
#: Otherwise connect your external wattmeter and measure energy consumed in 15 minute interval.
# Do not touch your computer until the test completes (15 minutes).
# Write the output to the results table.


==ATI / AMD (Radeon)==
|actions=
{{admon/note|Run from battery|This test needs to be run on battery (laptops) or with connected external wattmeter. In case you have laptop and also use external wattmeter please disconnect battery.}}
{{admon/note|Battery charge level|If you are running on battery, please recharge your battery to full capacity before running this test. If you don't have enough time, you can skip the recharging. }}
{{admon/note|Measurement problems|If it complains that the test cannot be run on your computer, use external wattmeter or skip this test.}}
{{admon/note|Screen blanking|If the screen blanks during the measurement, unblank it by e.g. mouse movement.}}


# Disable tuned by:
# Disable tuned by:

Revision as of 15:54, 16 April 2013

Description

This test case measures energy consumed by you system while in active idle with deactivated tuned (i.e. this is the default).

Limited audience
This test targets laptop users or users with wattmeter and those with Intel, Nvidia or ATI / AMD (Radeon) video cards.
Long test
This test will take approx. 15 minutes.
Optional test case
If you do not have laptop (or PC with wattmeter) or if you do not have enough time feel free to skip this test. In this case please leave the corresponding column in the results table blank.
Complementary test case
If you complete this test, please also complete the Tuned powersave idle test case .

Setup

  1. Check that you have pm-test-day package installed:
    $ rpm -q pm-test-day

For better results disable screensaver, screen dimming/turning off, transition to sleep mode and cron service:

  1. Disable screensaver (if applicable).
  2. Disable automatic suspend and screen blanking, in Gnome 3:
    $ gnome-control-center power
    • In "Suspend & Power Off" check that the "Automatic Suspend" is set to "Off".
    • In "Power Saving" set "Blank Screen" to "Never".
  3. For all measurements set LCD brigthness to max. value (if applicable) or at least to the same value for all measurements (if possible indicate your brightness level in the results table).
  4. Disable cron:
    # systemctl stop crond.service

Plese select and follow the paragraph bellow regarding your video card HW:

Intel

xx

Nvidia

xx

ATI / AMD (Radeon)

xx

How to test

Run from battery
This test needs to be run on battery (laptops) or with connected external wattmeter. In case you have laptop and also use external wattmeter please disconnect battery.
Battery charge level
If you are running on battery, please recharge your battery to full capacity before running this test. If you don't have enough time, you can skip the recharging.
Measurement problems
If it complains that the test cannot be run on your computer, use external wattmeter or skip this test.
Screen blanking
If the screen blanks during the measurement, unblank it by e.g. mouse movement.
  1. Disable tuned by:
    # systemctl stop tuned.service
  2. If you have laptop running on battery, run the following command:
    # pmtd-measure
    Otherwise connect your external wattmeter and measure energy consumed in 15 minute interval.
  3. Do not touch your computer until the test completes (15 minutes).
  4. Write the output to the results table.

Expected Results

  1. Energy consumed during the test.