From Fedora Project Wiki

Revision as of 00:48, 16 May 2013 by Codonell (talk | contribs) (Fix diff usage since that generates patches that need -p2. Add note that vim by default does not break hard links.)

Building a Kernel from the source RPM

Note these instructions *only* apply to Fedora 12 and later releases

This document provides instructions for advanced users who want to rebuild the kernel. Note, however, that when building or running any such kernel, one should NOT expect support from the Fedora kernel team, you're pretty much on your own here if something doesn't work as you'd hoped or expected. But hey, you're an advanced user, so you can handle it, right? Anyway, advanced users build custom kernels for a variety of reasons:

  • To apply patches for testing that they either generated or obtained from another source
  • To reconfigure the existing kernel
  • To learn more about the kernel and kernel development

These instructions can also be used for simply preparing the kernel source tree.

Before starting, make sure the system has all the necessary packages installed, including the following:

  • rpmdevtools
  • yum-utils

yum-utils is a default package. To install the other package, use the following command:

su -c 'yum install rpmdevtools yum-utils'

If you plan to use make menuconfig, it will be necessary to install the additional packages:

  • ncurses-devel

Use the following command:

su -c 'yum install ncurses-devel'

If you plan to use make xconfig, it will be necessary to install the additional packages:

  • qt3-devel
  • libXi-devel
  • gcc-c++

For Fedora 15, use the following command:

su -c 'yum install qt3-devel libXi-devel'


Get the Source

Do Not Build Packages as root.
Building packages as root is inherently dangerous and not required, even for the kernel. The following instructions allow any normal user to install and build kernels from the source packages.
  1. Prepare a RPM package building environment in your home directory. Run the following command:
    rpmdev-setuptree
    This command creates different directories ${HOME}/rpmbuild/SOURCES, ${HOME}/rpmbuild/SPECS, and ${HOME}/rpmbuild/BUILD. Where ${HOME} is your home directory.
  2. Download the kernel-<version>.src.rpm file. Enable the appropriate source repositories with the --enablerepo switch. (yumdownloader --enablerepo=repo_to_enable --source kernel)
    yumdownloader --source kernel
  3. Install build dependencies for the kernel source with the yum-builddep command (root is required to install these packages):
    su -c 'yum-builddep kernel-<version>.src.rpm'
  4. Install kernel-<version>.src.rpm with the following command:
    rpm -Uvh kernel-<version>.src.rpm
    This command writes the RPM contents into ${HOME}/rpmbuild/SOURCES and ${HOME}/rpmbuild/SPECS, where ${HOME} is your home directory. It is safe to ignore any messages similar to the following:
warning: user kojibuilder does not exist - using root
warning: group kojibuilder does not exist - using root
Space Required. The full kernel building process requires several gigabytes of extra space on the file system containing your home directory.

Prepare the Kernel Source Tree

This step expands all of the source code files for the kernel. This is required to view the code, edit the code, or to generate a patch.

1. Prepare the kernel source tree using the following commands:

cd ~/rpmbuild/SPECS
rpmbuild -bp --target=$(uname -m) kernel.spec

The kernel source tree is now located in the ~/rpmbuild/BUILD/kernel-<version>/linux-<version>.<arch> directory.

Copy the Source Tree and Generate a Patch

This step is for applying a patch to the kernel source. If a patch is not needed, proceed to "Configure Kernel Options".

Advanced Users
There are tools such as 'quilt' that allow you to avoid copying the source tree. For advanced users, such tools are often a time saver over the steps below

Copy the source tree to preserve the original tree while making changes to the


export arch=x86_64 # replace x86_64 with your arch
export ver=3.7 # replace 3.1 with your kernel version
export subver=4-204
export fedver=fc16 # replace fc16 with your fedora version 
cp -r ~/rpmbuild/BUILD/kernel-$ver.$fedver ~/rpmbuild/BUILD/kernel-$ver.$fedver.orig
cp -al ~/rpmbuild/BUILD/kernel-$ver.$fedver.orig ~/rpmbuild/BUILD/kernel-$ver.$fedver.new
The second cp command hardlinks the .orig and .new trees to make diff run faster. Most text editors know how to break the hardlink correctly to avoid problems. Vim does not break hard links by default, so don't use 'cp -al' use 'cp -r', or look into the 'breakhardlink' setting.

Using vim on FC14, it treated the hard link as a hard link and thus the above technique failed. It was necessary to repeat the original copy used for the .orig directory for the .new directory. Note that this uses twice the space.

Make changes directly to the code in the .new source tree, or copy in a modified file. This file might come from a developer who has requested a test, from the upstream kernel sources, or from a different distribution.

After the .new source tree is modified, generate a patch. To generate the patch, run diff against the entire .new and .orig source trees with the following command:

cd ~/rpmbuild/BUILD
diff -uNrp kernel-$ver.$fedver.orig kernel-$ver.$fedver.new > ../SOURCES/linux-$ver.$fedver-mynewpatch.patch

Replace 'linux-$ver.$fedver-mynewpatch.patch' with the desired name for the new patch.

Lastly edit the patch file to remove the leading directory, this is required because the kernel spec file applies patches with '-p1' only.

For example the following:

--- kernel-3.8.fc18/linux-3.8.11-200.bz708406.fc18.x86_64/kernel/kexec.c        2013-02-18 18:58:34.000000000 -0500
+++ kernel-3.8.fc18.new/linux-3.8.11-200.bz708406.fc18.x86_64/kernel/kexec.c    1969-12-31 19:00:00.000000000 -0500

Should be changed to:

--- linux-3.8.11-200.bz708406.fc18.x86_64/kernel/kexec.c        2013-02-18 18:58:34.000000000 -0500
+++ linux-3.8.11-200.bz708406.fc18.x86_64/kernel/kexec.c    1969-12-31 19:00:00.000000000 -0500


For more information on patching refer to the man pages for diff(1) and patch(1).

Configure Kernel Options

This step is for modifying the options the kernel is configured with. This step is optional. If no configuration changes are needed, proceed to "Prepare Build Files".

Small changes
If you only want to make a small number of configuration changes, you should simply set the options as desired in the config-local file. This will be sourced and override the remaining config-* files and avoids a lot of unnecessary work. You can skip the steps below if you use config-local
  1. Change to the kernel source tree directory:
    cd ~/rpmbuild/BUILD/kernel-$ver.$subver.$fedver/linux-$ver.$arch/
    If you only want to make minor changes to the default fedora kernel, skip to step 4., and use one of the two configuration tools to edit those minor changes into the default config file.
  2. Select the desired configuration file from ~/rpmbuild/BUILD/kernel-$ver.$fedver/linux-$ver.$arch/configs. Copy the desired config file to ~/rpmbuild/BUILD/kernel-$ver.$fedver/linux-$ver.$arch/.config:
    cp configs/<desired-config-file> .config
  3. Run the following command:
    make oldconfig
  4. Then run the following command, selecting and saving the desired kernel options from the text-based UI:
    make menuconfig
    • For a graphical UI, instead run:
      make xconfig
  5. Add a new line to the top of the config file that contains the hardware platform the kernel is built for (the output of uname -i). The line is preceded by a # sign. For example, an x86_64 machine would have the following line added to the top of the config file:
    # x86_64
  6. Copy the config file to ~/rpmbuild/SOURCES/:
    cp .config ~/rpmbuild/SOURCES/config-`uname -m`-generic
32-bit x86 kernels
The 32-bit PAE kernel uses the config-i686-PAE configuration file. If you are building a PAE kernel, you will need to copy your config file to ~/rpmbuild/SOURCES/:
 cp .config ~/rpmbuild/SOURCES/config-i686-PAE
If you are building a non-PAE kernel, you will need to copy your config file to
 cp .config ~/rpmbuild/SOURCES/config-x86-32-generic
. Again, the use of config-local is encouraged unless you are making a large number of configuration changes.

Prepare Build Files

This step makes the necessary changes to the kernel.spec file. This step is required for building a custom kernel.

1. Change to the ~/rpmbuild/SPECS directory:

cd ~/rpmbuild/SPECS

2. Open the kernel.spec file for editing.
3. Give the kernel a unique name. This is important to ensure the custom kernel is not confused with any released kernel. Add a unique string to the kernel name by changing the 'buildid' line. Optionally, change ".local" to your initials, a bug number, the date or any other unique string.

Change this line:

#% define buildid .local

To this (note the extra space is removed in addition to the pound sign):

%define buildid .<custom_text>

4. If you generated a patch, add the patch to the kernel.spec file, preferably at the end of all the existing patches and clearly commented.

# cputime accounting is broken, revert to 2.6.22 version
Patch2220: linux-2.6-cputime-fix-accounting.patch

Patch9999: linux-2.6-samfw-test.patch

The patch then needs to be applied in the patch application section of the spec file. Again, at the end of the existing patch applications and clearly commented.

ApplyPatch linux-2.6-cputime-fix-accounting.patch

ApplyPatch linux-2.6-samfw-test.patch


Build the New Kernel

This step actually generates the kernel RPM files. This step is required for building a custom kernel. For Fedora 10 or 11, for most purposes, it will be simplest to build with firmware included (see the last form below).

Use the rpmbuild utility to build the new kernel:

  • To build all kernel flavors:
rpmbuild -bb --target=`uname -m` kernel.spec
  • To disable specific kernel flavors from the build (for a faster build):
rpmbuild -bb --without <option> --target=`uname -m` kernel.spec

Valid values for "option" above include xen, smp, up, pae, kdump, debug and debuginfo. Specifying --without debug strips out some debugging code from the kernels, where specifying --without debuginfo disables the building of the kernel-debuginfo packages.

  • To specify that only a specific kernel should be built:
rpmbuild -bb --with <option> --target=`uname -m` kernel.spec

Valid values for "option" above include xenonly, smponly, and baseonly.

  • For example, to build just the kernel and kernel-devel packages, the command would be:
rpmbuild -bb --with baseonly --without debuginfo --target=`uname -m` kernel.spec
  • To build with firmware included, do:
rpmbuild -bb --with baseonly --with firmware --without debuginfo \
--target=`uname -m` kernel.spec 

The build process takes a long time to complete. A lot of messages will be printed to the screen. These messages can be ignored, unless the build ends with an error. If the build completes successfully, the new kernel packages will be located in the ~/rpmbuild/RPMS directory.

TO DO
add a troubleshooting section

Following Generic Textbooks

Many of the tutorials, examples, and textbooks about Linux kernel development assume the kernel sources are installed under the /usr/src/linux/ directory. If you make a symbolic link, as shown below, you should be able to use those learning materials with the Fedora packages. Install the appropriate kernel sources, as shown earlier, and then run the following command:

su -c 'ln -s /usr/src/kernels/<version>.<release>-<arch> /usr/src/linux'

Enter the root password when prompted.

Install the New Kernel

This step actually installs the new kernel into the running system.

To install the new kernel, use the rpm -ivh command, not the -U or --upgrade options:

su -c "rpm -ivh --force $HOME/rpmbuild/RPMS/<arch>/kernel-<version>.<arch>.rpm"

If you changed the name of your kernel as requested, your firmware and kernel headers won't match. The simplest solution is to build new firmware as described in 'Build the New Kernel', then

su -c "rpm -ivh $HOME/rpmbuild/RPMS/<arch>/kernel-<version>.<arch>.rpm \
       $HOME/rpmbuild/RPMS/<arch>/kernel-firmware-<version>.<arch>.rpm \
       $HOME/rpmbuild/RPMS/<arch>/kernel-headers-<version>.<arch>.rpm \
       $HOME/rpmbuild/RPMS/<arch>/kernel-devel-<version>.<arch>.rpm"

These commands will install your kernel in /boot, create a new initramfs to bootstrap your kernel, and automatically add your new kernel to your grub bootloader "menu.lst". At this point, you can reboot to give control to your new kernel.

Building Only Kernel Modules (Out Of Tree Modules)

This section needs to be updated and fleshed out

This section is for users who are only interested in working on a kernel module, and who do not wish to build an entire custom kernel. It is not necessary to download and rebuild the entire kernel in order to build a module. To build a module for the currently running kernel, only the matching kernel-devel package is required. Run the following command to install the kernel-devel package using yum.

su -c 'yum install kernel-devel'
You may need to install 'kernel-PAE-devel' if you are using the PAE kernel

You can build against any kernel version, as long as you have kernel and kernel-devel packages installed for that version. The rest of this section assumes we're building for the running kernel; if not, replace uname -r with the desired version number.

The kernel-doc package contains official Kbuild documentation - see files under Documentation/kbuild, in particular the modules.txt file.

As a simple example, to build the foo.ko module from foo.c, create the following Makefile in the directory containing the foo.c file:

obj-m := foo.o

KDIR  := /lib/modules/$(shell uname -r)/build
PWD   := $(shell pwd)

default:
[TAB]$(MAKE) -C $(KDIR) M=$(PWD) modules

[TAB] Denotes a tab character which must come first for makefile lines containing commands.

Then, issue the make command to build the foo.ko module.

The above is a helpful local Makefile wrapper invoking kbuild; in general you can simply do things like

# make -C /lib/modules/`uname -r`/build M=`pwd` modules
# make -C /lib/modules/`uname -r`/build M=`pwd` clean
# make -C /lib/modules/`uname -r`/build M=`pwd` modules_install

etc to build those targets.