From Fedora Project Wiki

Revision as of 16:56, 1 August 2020 by Hobbes1069 (talk | contribs) (Created page with "== Setting up Pat (Open Source Winlink client written in GO) == === Installing Dependencies === First let's install all the required packages $ sudo dnf install libax25 ax2...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Setting up Pat (Open Source Winlink client written in GO)

Installing Dependencies

First let's install all the required packages

$ sudo dnf install libax25 ax25-tools direwolf kernel-modules-extra pavucontrol

Then download pat from the following link as it is not in Fedora at this time:

Installing pat

https://github.com/la5nta/pat/releases

Download the appropriate one for your arch, i386 or amd64 then extract and copy the binary into /usr/local/bin.

Configuring AX.25

Edit /etc/ax25/axports and add the following at the bottom:

#portname callsign speed paclen window description

wl2k <callsign> 0 128 2 Pat Winlink

The speed is set to 0 because we're using a soundcard based modem instead of a hardware TNC.

Configuring direwolf

Copy the direwolf.conf file from /usr/share/doc/direwolf/examples to the home directory of the user that will run direwolf. Most of the settings are self explanatory such as setting up your callsign. The most important part, other than your callsign, is how you will key the PTT of your radio. Setting this up PTT is out of scope for this howto but the direwolf documentation is quite nice.

Configuring pat

$ pat configure

Running manually and testing

$ sudo modprobe ax25 $ direwolf -p

Take note of the ptt it uses, we'll need it later

$ kissattach <tty from direwolf> wl2k $ sudo kissparms -p wl2k -t 300 -l 50 -s 100 -r 25 -f n $ pat

At this point pat should be running a http server on http://localhost:8080