Architectures/ARM/AllwinerA10

From FedoraProject

< Architectures | ARM(Difference between revisions)
Jump to: navigation, search
(Fedora Arm Remix for Allwinnner A10, A10s and A13 based devices)
(Fedora Arm Remix for Allwinnner A10, A10s and A13 based devices)
Line 5: Line 5:
 
The Allwinner A10 is a Cortex-A8 SoC aimed at Tablets and Media device.
 
The Allwinner A10 is a Cortex-A8 SoC aimed at Tablets and Media device.
  
'''Community Project:''' Support for A10 Devices is currently provide by the community on a best-effort basis. The Kernel code to support the A10 has not yet been pushed into the mainline Kernel.
+
'''Community Project:''' Support for A10 Devices is currently provide by the community on a best-effort basis. The Kernel code to support the A10 has not yet been pushed into the mainline Kernel.
 
+
== Fedora Arm Remix for Allwinnner A10, A10s and A13 based devices ==
+
 
+
Hans de Goede has released an Allwinner A10 remix supporting a variety of devices including the Gooseberry development board, Mele, Mini-X, mk802 and mk802ii and more. It can be downloaded here:
+
 
+
http://scotland.proximity.on.ca/contrib-images/hansg/Fedora-18-a10-armhfp-r2.img.xz
+
 
+
Installation is easy:
+
# Download the image
+
# dd it to an sdcard, ie "xzcat Fedora-18-a10-armhfp-r2.img.xz > /dev/mmcblk0"
+
# Remove the card, and re-insert it
+
# Run select-board.sh to install u-boot for your board-type, ie: "sudo bash /run/media/hans/uboot/select-board.sh"
+
 
+
For a list of all supported boards and full installation instructions see the [http://scotland.proximity.on.ca/contrib-images/hansg/README README].
+

Revision as of 14:16, 17 July 2013


Allwinner A10 Series

The Allwinner A10 is a Cortex-A8 SoC aimed at Tablets and Media device.

Community Project: Support for A10 Devices is currently provide by the community on a best-effort basis. The Kernel code to support the A10 has not yet been pushed into the mainline Kernel.