Architectures/ARM/F19/Beta

Fedora 19 ARM Beta

This is the latest Fedora 19 Beta Release Candidate for the ARM architecture and marks a significant milestone for Fedora on ARM. There two images available for the Beta, one for use in OMAP platforms the other for use in the Trimslice and Exynos5 hardware platforms.

For Trimslice(kernel-tegra)

IMPORTANT
You must use a Device Tree enabled Uboot to boot the Fedora 19 Trimslice image. Failure to do so will result in a non-booting system.

Download the image for use in the Trimslice:

wget http://dl.fedoraproject.org/pub/fedora-secondary/releases/test/19-Beta/Images/armhfp/Fedora-armhfp-19-Beta-1-sda.raw.xz

Copy the image to the intended media:

xzcat Fedora-armhfp-19-Beta-1-sda.raw.xz > /dev/<location-of-your-media> 

Insert into the Trimslice and boot. There is no root password required initially - this something you should change right away.

Once the system is booted it is recommended to do a little clean up. Remove the unneeded kernels:

yum remove kernel kernel-lpae

For OMAP

Download the image for use with Omap platforms (Pandaboard, Pandaboard ES, Beagleboard)

wget http://dl.fedoraproject.org/pub/fedora-secondary/releases/test/19-Beta/Images/armhfp/Fedora-OMAP-armhfp-19-Beta-1-sda.raw.xz

Copy the image to the intended media:

xzcat Fedora-OMAP-armhfp-19-Beta-1-sda.raw.xz > /dev/<location-of-your-media>

For Versatile Express Emulation with QEMU

Even without hardware its possible to run the Fedora 19 ARM Beta using QEMU. To this we will use the generic image.

wget http://dl.fedoraproject.org/pub/fedora-secondary/releases/test/19-Beta/Images/armhfp/Fedora-armhfp-19-Beta-1-sda.raw.xz

Extract the image:

unxz Fedora-armhfp-19-Beta-1-sda.raw.xz

Mount the image and extract the kernel and initramfs for use with booting.

sudo kpartx -av Fedora-armhfp-19-Beta-1-sda.raw

Make a temporary mount point

mkdir /tmp/boot
sudo mount /dev/mapper/loop0p3 /tmp/boot
sudo cp /tmp/boot/initramfs-3.9.2-301.fc19.armv7hl.img .
sudo cp /tmp/boot/vmlinuz-3.9.2-301.fc19.armv7hl .
sudo cp -r /tmp/boot/dtb-3.9.2-301.fc19.armv7hl .

To boot:

qemu-system-arm -machine vexpress-a9 -m 1024 -nographic -net nic -net user \

-append "console=ttyAMA0,115200n8 rw root=/dev/mmcblk0p3 rootwait physmap.enabled=0" \
-kernel vmlinuz-3.9.2-301.fc19.armv7hl \
-initrd initramfs-3.9.2-301.fc19.armv7hl.img \
-sd Fedora-armhfp-19-Beta-1-sda.raw \
--dtb dtb-3.9.2-301.fc19.armv7hl/vexpress-v2p-ca9.dtb