From Fedora Project Wiki

< Architectures‎ | ARM

Revision as of 17:55, 28 June 2013 by Pwhalen (talk | contribs) (For the Trimslice)

Fedora 19 for ARM

The Fedora ARM team is pleased to announce the Fedora 19 for ARM is now available for download from:

Fedora 19 for ARM includes two image types - one for use with platforms requiring a VFAT partition(Pandaboard), the other for use with devices that boot from an EXT partition(Trimslice). For each of these there are a number of desktop choices including MATE, KDE, XFCE, LXDE, SOAS and a minimal image that does not include the desktop. Any of these images can be used with QEMU.

For the Trimslice

You must use the latest Device Tree enabled Uboot to boot the Fedora 19 Trimslice image, which you can find here. Failure to do so will result in a non-booting system.

Download the image of your choice for use with the Trimslice:


Copy the image to the intended media:

xzcat Fedora-armhfp-19-Beta-1-sda.raw.xz > /dev/<location-of-your-media> 

Insert into the Trimslice and boot. Fedora will boot to an initial setup screen allowing you to create your user, set the root password and timezone.

For the Pandaboard and Pandaboard ES

Download the image of your choice for use with the Pandaboard or Pandaboard ES.


Writing the image As root copy the image to the intended media:

xzcat Fedora-OMAP-armhfp-19-Beta-1-sda.raw.xz > /dev/<location-of-your-media>

Before Booting the OMAP Image

Before booting the OMAP image you will need to populate the first partition specific to your device.

For Versatile Express Emulation with QEMU

Even without hardware its possible to run the Fedora 19 ARM Beta using QEMU. To this we will use the generic image.


Extract the image:

unxz Fedora-armhfp-19-Beta-1-sda.raw.xz

Mount the image and extract the kernel and initramfs for use with booting.

sudo kpartx -av Fedora-armhfp-19-Beta-1-sda.raw

Make a temporary mount point

mkdir /tmp/boot
sudo mount /dev/mapper/loop0p1 /tmp/boot
sudo cp /tmp/boot/initramfs-3.9.2-301.fc19.armv7hl.img .
sudo cp /tmp/boot/vmlinuz-3.9.2-301.fc19.armv7hl .

To boot:

sudo qemu-system-arm -machine vexpress-a9 -m 1024 -nographic -net nic -net user \
 -append "console=ttyAMA0,115200n8 rw root=/dev/mmcblk0p3 rootwait physmap.enabled=0" \
 -kernel vmlinuz-3.9.2-301.fc19.armv7hl \
 -initrd initramfs-3.9.2-301.fc19.armv7hl.img \
 -sd Fedora-armhfp-19-Beta-1-sda.raw \

For convenience you can also download a script for booting the system here. To run the script:

chmod 755 boot-vexpress
./boot-vexpress -h
Usage: ./boot-vexpress [--gui] --kernel=vmlinuz... --ramfs=initramfs --image=fsimage [--dtb=vexpress.dtb]

To boot the image:

sudo ./boot-vexpress --kernel=vmlinuz-3.9.2-301.fc19.armv7hl --ramfs=initramfs-3.9.2-301.fc19.armv7hl.img --image=Fedora-armhfp-19-Beta-1-sda.raw

Booting with device tree is possible, although passing --gui for graphics will not work. Booting without device tree is recommended for F-19, as it will work in both serial and graphics mode, whereas passing a DTB will only work with serial.

Calxeda EnergyCore (HighBank)

The Fedora 19 Beta for ARM includes support for systems that are able to perform a network installation using a kickstart, including enterprise hardware such as the Highbank. A working kickstart can be found here.

For more detailed instructions on setting this up, please visit this page.

Known Issues

  • Significant logical volume noise on first boot. This is harmless and resolved after rebooting the system.
  • Initial setup is not run on first boot.