View source for Architectures/ARM/Quality Assurance/2012-12-20-VFAD-Fedora 18 Beta-TrimSlice-SSD

#Copy the below tests and results chart to a page that you create. 
#*Download the image for your system from  http://scotland.proximity.on.ca/arm-nightlies/vault/f18-beta-tc3/ as well as the corresponding checksum file http://scotland.proximity.on.ca/arm-nightlies/vault/f18-beta-tc3/SHA256SUMS
#Does your downloaded image have the correct checksum?
#*Run the command: sha256sum --check SHA256SUMS
#Check the image size:
#*xzcat NameOfImage.xz|wc -c - Is the uncompressed image no larger than 4GB? 
#Copy the image to your SD card: 
#*xzcat (name-of-image) > /dev/SD_Card_Device and then insert it into your system and power on. Does the system boot? 
#Do all default services start properly? 
#*Watch for service-start failure messages during boot.
#Check the boot result:
#*If graphics hardware is present and the image is configured for a graphical user interface, does the system successfully boot to the GUI? 
#*If no graphical hardware is present, does the system successfully boot to a login prompt? (Note: depending on the image, the login prompt may appear on a connected monitor or on a serial console)
#Are you able to download and install updates with yum, and if available the default graphical package manager? 
#*Test this using the command: yum install sl and yum update (you may want to limit this to one package as updates can take a while depending on your media. eg - yum update bash)
#*Graphical user interfaces only: use the graphical package manager for your desktop (if applicable) to install zsh
#Is logging functional? It must provide at least basic local  file-based logging of kernel messages, and allow other components to  write log messages.
#*Test using the command: tail -f /var/log/messages
#Are you able to shutdown the system using standard console commands? 
#*Test poweroff or halt or reboot or shutdown -h now
#If audio device support is present, does it work? 
#*Test with: play /usr/share/sounds/alsa/*wav
#Are the final branded release notes from the Documentation team  present on the installed media? 
#*Check /usr/share/doc/HTML/fedora-release-notes. In a graphical user interface, look for a "Release Notes" menu entry. 
#Graphical user interfaces only: Is it possible to run Midori and a terminal application? 
#*Use the browser to download a small file - http://scotland.proximity.on.ca/arm-nightlies/vault/f18-beta-tc3/SHA256SUMS  
#*Load extensions (Midori -> Menu -> Preferences -> Extensions -> <choose an extension>)
#*Log into FAS. 
#Graphical user interfaces only is the default Fedora artwork used (currently not decided)? 
#*Default wallpaper - http://fedoraproject.org/wiki/F18_Artwork
#Graphical user interfaces only: Are the desktop's panels working and fully functional? 
#Graphical user interfaces only: Is media automatically detected when inserted? 
#*Plug in a USB device or other removable media. Does the system automatically mount the device?
#Graphical user interfaces only: On graphical hardware - do offered mechanisms (if any) for shutting down, logging out and rebooting work? 
#*Use the GUI to logout, reboot and shutdown the system.
#Graphical user interfaces only: Do  all elements of the default panel (or equivalent)  configuration in all  release-blocking desktops function correctly in  common use? 
#*Does every button do what it is supposed to do? 
#*Do GUI actions align correctly with the pointer position?
#Graphical user interfaces only: Menu sanity:
#*All Applications listed in the system menus (or equivalent) must  have icons which have a consistent appearance and sufficiently high  resolution to avoid appearing blurry  
#*Do all applications listed under the Applications menu or category start successfully? 
#*Do all applications listed under the Applications menu or  category must withstand a basic functionality test and not crash after a   few minutes of normal use. They must also have working Help and Help  -> About menu items  
#*Ensure no application appears more then once in the  menus. In particular, items under System must not appear under  Applications 
#Graphical user interfaces only: Does Saving passwords in the desktop default keyring (if the  desktop implements one), and retrieving passwords from the keyring work?
#*Create an ssh key: ssh-keygen # Use a passphrase
#*Copy the ssh key to a remote system: ssh-copy-id YourUserId@RemoteSystem # Enter password when prompted
#*Connect to the remote system: ssh YourUserId@RemoteSystem # You should be prompted for the passphrase. Select the checkbox marked "Unlock this key when I log in" (or similar wording)
#*Log out.
#*Log back in to the system.
#*Connect to the remote system again: ssh YourUserId@RemoteSystem # You should not be prompted for your passphrase.

===Results===
{|class="wikimedia" style="t1" rowclass="th" width="100%"
! Test !! Result !! Notes 
|-
|| 1 ||	{{result|pass}} ||  
|-
|| 2 || {{result|pass}}  ||    
|-
|| 3 ||	{{result|pass}}  || 
|-
|| 4 ||	{{result|pass}}  ||  
|-
|| 5 ||	{{result|pass}}  ||    
|-
|| 6 ||	{{result|pass}}  ||   
|-
|| 7 ||	{{result|pass}}  ||   
|-
|| 8 ||	{{result|pass}}  || I noticed a USB reset message in the log:
  usb 3-1: reset high-speed USB device number 2 using tegra-ehci
|-
|| 9 ||	{{result|pass}}  || Tested reboot.
|-
|| 10 || n/a ||    
|-
|| 11 || {{result|pass}}  ||
|-
|| 12 || n/a ||
|-
|| 13 || n/a ||
|-
|| 14 || n/a ||
|-
|| 15 || n/a ||
|-
|| 16 || n/a ||
|-
|| 17 || n/a ||
|-
|| 18 || n/a ||
|-
|| 19 || n/a ||
|}
[[Category:Fedora ARM VFAD]]