From Fedora Project Wiki
< Architectures | ARM | Quality Assurance | Kernel Testing
| Line 43: | Line 43: | ||
! Hardware !! boot !! Network !! Serial !! USB !! Display !! Final Notes | ! Hardware !! boot !! Network !! Serial !! USB !! Display !! Final Notes | ||
|- | |- | ||
|| Versatile Express (Qemu) || | || Versatile Express (Qemu) ||{{result|fail}} || || || ||n/a || Division by zero in kernel. | ||
|- | |- | ||
|| Pandaboard || || SD || || || || | || Pandaboard || || SD || || || || | ||
|- | |- | ||
|| Trimslice Bare/Value Pro ||{{result|pass}} ||{{result|pass}} ||{{result|pass}} ||{{result|pass}} || N/A || | || Trimslice Bare/Value Pro ||{{result|pass}} ||{{result|pass}} ||{{result|pass}} ||{{result|pass}} || N/A || Did not replace running kernel. | ||
|- | |- | ||
|| Trimslice Pro/H/H250 || || | || Trimslice Pro/H/H250 ||{{result|pass}} ||{{result|pass}} ||{{result|pass}} ||{{result|pass}} ||N/A ||Tested using USB flash drive. Did not replace running kernel. | ||
|- | |- | ||
|| Highbank || || || || || || | || Highbank || || || || || || | ||
Revision as of 15:03, 22 March 2013
Upgrading F17 Images to 3.7 Kernel
F17 GA
Starting with the F17 GA image, yum updated 2013-02-14.
kernel-3.7.3-101.fc17
| Hardware | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | n/a | The install failure resulted on a fully updated F17 system. The boot failure occurred on a F17 GA system, there was no install error, but the kernel did not boot (using qemu-system-arm-1.2.2-6.fc18.x86_64). DTB used for boot test (required). | ||||
| Pandaboard |  |
|
|
|
||
| Trimslice Bare/Value Pro | U-Boot 2012.04.01-1.01 |
Kernel test booted on F18 rootfs successfully. The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb. | ||||
| Trimslice Pro/H/H250 | ||||||
| Highbank | ||||||
| Beagleboard XM | ||||||
| Kirkwood | Tested on GuruPlug Server Plus |
kernel-3.7.9-101.fc17
| Hardware | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|
| Versatile Express (Qemu) |  |
Disk Image | n/a | fpaste of boot, using qemu-system-arm-1.2.2-6.fc18.x86_64 with DTB. | ||
| Pandaboard | |
SD | |
|
|
Boots with no additional configuration. |
| Trimslice Bare/Value Pro | |
SD | |
|
|
The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb. |
| Trimslice Pro/H/H250 | |
SATA | |
|
|
The Trimslice needs a Uboot upgrade to U-Boot 2012.04.01-1.01, a new boot script that changes the load address for the initramfs and a dtb. |
| Highbank |  |
|
|
|
N/A | Kernel crash after short period of use - Backtrace |
| Beagleboard XM |
kernel-3.8.3-102.fc17
| Hardware | boot | Network | Serial | USB | Display | Final Notes |
|---|---|---|---|---|---|---|
| Versatile Express (Qemu) | |
n/a | Division by zero in kernel. | |||
| Pandaboard | SD | |||||
| Trimslice Bare/Value Pro | |
|
|
|
N/A | Did not replace running kernel. |
| Trimslice Pro/H/H250 | |
|
|
|
N/A | Tested using USB flash drive. Did not replace running kernel. |
| Highbank | ||||||
| Beagleboard XM |