This page documents common bugs in Fedora 30 and, if available, fixes or workarounds for these problems. If you find your problem in this page, please do not file a bug for it, unless otherwise instructed. Where appropriate, a reference to the current bug(s) in Bugzilla is included.
- 1 Release Notes
- 2 My bug is not listed
- 3 Core system issues
- 3.1 Upgrade bcache based systems to Fedora 30 may result in severe storage corruption
- 3.2 DNF logs very verbosely by default, leads to large log files
- 3.3 Multiple services fail to start with "status=226/NAMESPACE" in unusual cases
- 3.4 Encrypted system does not resume from hibernation correctly if you wait more than 90 seconds to input encryption password
- 4 Upgrade issues
- 5 Hardware issues
- 6 Other software issues
- 7 另见
My bug is not listed
Not every bug is listed in this page, but Bugzilla should be a comprehensive database of known bugs. This page is a sampling of the bugs most commonly discussed on our mailing lists and forums.
To see if your bug has already been reported, you can search Bugzilla. If it has not yet been reported, we encourage you to do so to help improve Fedora for yourself and others. A guide to Bugs and feature requests has been prepared to assist you.
If you believe an already-reported bug report should be added to this page because it is commonly encountered, you can:
- Add it yourself, if you have wiki access. Common_bugs_instructions provides guidance on how to add an entry to the page correctly, but the most important thing is to make sure that the bug is listed - don't worry if you don't get the format quite right, we can clean it up later.
- Or, add the CommonBugs keyword to the bug report. Someone from the QA team will then inspect the issue to determine whether the bug should be listed as a common bug. To expedite your request, please add a comment to the bug that includes
- a summary of the problem
- any known workarounds
- an assessment on the impact to Fedora users
For reference, you can query Bugzilla for bugs tagged CommonBugs:
- CommonBugs? (bugs with CommonBugs keyword, but do not yet have a link to this page)
- CommonBugs+(bugs with CommonBugs keyword and contain a link to this page)
Core system issues
Upgrade bcache based systems to Fedora 30 may result in severe storage corruption
Fedora 30 kernels may severely corrupt your system when you are using bcache. To mitigate, disable (detach) cache devices before upgrading to Fedora 30.
This issue has been fixed in kernel version 5.1.12.
DNF logs very verbosely by default, leads to large log files
By default, the DNF included with Fedora 30 does some very verbose logging. Especially the file
/var/log/dnf.librepo.log contains very detailed logging of mirror selection and file download operations. Some operations, such as a system upgrade or
reposync, can potentially cause multiple gigabytes of messages to be written to this log file. The DNF log files are configured for rotation, so they will be compressed and expired weekly so long as
is installed, but this can be insufficient when a single operation can cause the files to grow very large.
If the DNF log files are filling up your disk and you need a solution urgently, it is safe to simply remove the log files (after copying them elsewhere if you need them for reference), this will not break anything. A future libdnf update is planned to reduce the
dnf.librepo.log verbosity. Until then, if this is an ongoing problem for you, you can work around it by redirecting the log output to
/dev/null - see this bug comment for one way to do that.
Multiple services fail to start with "status=226/NAMESPACE" in unusual cases
Fedora 30's SELinux policy prevents systemd services with
/sys etc.) In most cases you should not run into this issue, but some users who have transferred existing installations to other systems or deployed Fedora in unusual ways may do so (for instance, Hans de Goede ran into this after transferring a Fedora system from one disk to another using
cp -pr, which does not preserve these labels).
A 'normal' relabel will not solve this problem as the mount points have something mounted on them by the time it runs, and the relabelling is applied to the mounts, not the underlying mount points. To relabel the mount points, you must boot a live or rescue image, mount the installed system's root filesystem, change into the mounted directory, and run:
chcon -t device_t dev chcon -t home_root_t home chcon -t root_t proc sys chcon -t var_run_t run
Then unmount the mounted directory and reboot to the installed system, and now things should be fixed.
Encrypted system does not resume from hibernation correctly if you wait more than 90 seconds to input encryption password
If you install Fedora 30 with the system partitions encrypted, and then hibernate (suspend-to-disk), when attempting to resume, you will be prompted to input the encryption password. If you wait longer than 90 seconds before inputting the password, the system will not resume from hibernation correctly - instead a fresh boot will be performed and your previous state will be lost.
There is currently no known workaround for this problem besides simply making sure you input the password soon enough to avoid it happening.
If you have a legacy BIOS installation (i.e. not UEFI), it is possible that after the upgrade process the GRUB bootloader will not populate the boot menu, and instead displays a GRUB prompt. This happens on systems that were originally installed using Fedora 20 or older.
This happens because the GRUB core and modules in legacy BIOS are never updated unless the
grub2-install command is executed. In Fedora 30 the default GRUB configuration is changed to use BootLoaderSpec-style files by default, and the blscfg module is updated when the
package is upgraded. However, this module is only compatible with versions of the GRUB core up to Fedora 21.
If GRUB has not been updated since Fedora 20 or earlier, it is recommended to execute the
grub2-install command before doing a system upgrade. This should not affect legacy BIOS installations since Fedora 21. UEFI installs are unaffected because during upgrade the GRUB EFI image, containing the core and modules, is updated.
If you hit this issue, the old GRUB configuration is stored in /boot/grub2/grub.cfg.rpmsave. So the system can be recovered by executing the following from the GRUB prompt:
grub> configfile /grub2/grub.cfg.rpmsave
Conflicts between fedora-release packages on upgrade
When attempting to upgrade to Fedora 30, you may see conflicts between multiple
subpackages. If this happens, we recommend you remove one of the conflicting packages to unblock the upgrade. Leave installed the package that most closely matches how you want the system to identify itself - the one that most closely matches your primary use of the system.
Broadcom wireless adapters using proprietary broadcom-wl driver do not work reliably
Multiple users of wireless network adapters supported by the proprietary broadcom-wl driver have reported that it does not work reliably in Fedora 30. PLEASE NOTE that Fedora does not provide or support this proprietary driver; we are providing this note only as a courtesy as we are aware that many people acquire the driver from a third party and use it on Fedora.
The problem seems to be that a new feature in
that was enabled in Fedora 30 confuses the broadcom-wl driver. As the driver is not open source we cannot provide a fixed version of it, and we will not disable a useful
feature just to make a proprietary driver work correctly.
To help out folks with affected devices, Davide Caratti is providing unofficial rebuilds of
with the feature in question disabled. You can enable his COPR repository by running
sudo dnf copr enable dcaratti/wpa_supplicant, and then updating your system should install his rebuild, if it is currently up-to-date compared to the version in the official repositories. With this rebuild installed, the wireless adapter should work reliably.
Other software issues
Conflicts between fedora-release packages when installing package groups
When trying to install package groups, you may run into a conflict between different
subpackages. This can happen for example if you install the server-product package group or several of the desktop groups after initial system installation. This error would look something like this:
Error: Problem: problem with installed package fedora-release-workstation-30-0.24.noarch - package fedora-release-workstation-30-0.24.noarch conflicts with system-release provided by fedora-release-matecompiz-30-0.25.noarch - package fedora-release-matecompiz-30-0.25.noarch conflicts with system-release provided by fedora-release-workstation-30-0.24.noarch - package fedora-release-workstation-30-0.25.noarch conflicts with system-release provided by fedora-release-matecompiz-30-0.25.noarch - package fedora-release-matecompiz-30-0.25.noarch conflicts with system-release provided by fedora-release-workstation-30-0.25.noarch - conflicting requests (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages)
But with the package names depending on the package you already have installed, and the package coming in with the group you are trying to install.
You have four choices for how to resolve this issue. In each case we use the package names from the example above; obviously you should modify these to match the package names that are actually involved in the conflict on your system.
- RECOMMENDED Pass
--excludepkg fedora-release-matecompizto DNF. This will remove just this package from the transaction and allow the rest of the group to be resolved normally. This option will retain your system's "identity" to what it was from initial installation.
--excludepkg fedora-release-workstationto DNF. This will remove just this package from the transaction and allow the rest of the group to be resolved normally. This option will change your system identity such that it will now report as a MATE Compiz system rather than a Workstation one.
--skip-broken. This is similar to passing
--excludepkg fedora-release-matecompizexcept that it will also skip any other potential conflicts which may result in an incomplete group install. Make sure to carefully examine the transaction summary before proceeding. This option will retain your system's "identity" to what it was from initial installation.
--allowerasing. This is similar to passing
--excludepkg fedora-release-workstationexcept that it may also result in replacing other packages on your system unexpectedly. Make sure to carefully examine the transaction summary before proceeding. This option will change your system identity such that it will now report as a MATE Compiz system rather than a Workstation one.
Problems trying to install Eclipse, or upgrade a system with Eclipse installed
Multiple users have reported that attempting to install Eclipse and/or related packages, or to upgrade a system with Eclipse installed to Fedora 30, fails with various dependency errors. This appears to be caused by mismatches between packages in some modules and packages in the non-modular repositories. The relevant packagers are working to investigate and resolve these issues as soon as possible. Please follow the bug report for specific details and possible workarounds.
repoview package cannot be installed
As the dependency is essential (repoview does nothing useful without it) and the package is 'baked into' the frozen release tree, we cannot solve this except by reviving python2-kid. If this does not happen, the package will remain available but not installable. We apologize for the inconvenience.