From Fedora Project Wiki
(Add trackers)
Line 28: Line 28:
The default NTP client and server on Fedora is `chrony`. Support for NTS is added in version 4.0. It uses the GnuTLS library for TLS and the Nettle library for AEAD.
The default NTP client and server on Fedora is `chrony`. Support for NTS is added in version 4.0. It uses the GnuTLS library for TLS and the Nettle library for AEAD.


NTS is not enabled by default. It can be enabled on clients by adding the `nts` option to the `server` or `pool` directive in ''/etc/chrony.conf''. Until a standard NTS-KE port is assigned for NTS by IANA and used by NTP servers, the port needs to be specified with the `ntsport` option. For example
NTS is not enabled by default. It can be enabled on clients by adding the `nts` option to the `server` or `pool` directive in ''/etc/chrony.conf''. For example


`
`
server time.example.com iburst nts ntsport 12123
server time.example.com iburst nts
`
`


There are several issues that may prevent NTS from working correctly:
There are several issues that may prevent NTS from working correctly:
* Firewalls may block the NTS-KE port.
* Firewalls may block the NTS-KE port.
* ISPs may block or rate limit longer NTP packets as a mitigation for amplification attacks using NTP mode 6 and 7. NTS-KE supports port negotiation and an alternative port could be used to avoid this issue.
* ISPs may block or rate limit longer NTP packets as a mitigation for amplification attacks using NTP mode 6 and 7. NTS-KE supports port negotiation and servers can provide an alternative port to avoid this issue.
* Computers with no RTC (e.g. some ARM boards), or RTC that is too far from the real time, will fail to verify TLS certificates. It is possible to disable the time checks before the first update of the clock by adding `nocerttimecheck 1` to ''/etc/chrony.conf'', but it has an impact on security.
* Computers with no RTC (e.g. some ARM boards), or RTC that is too far from the real time, will fail to verify TLS certificates. It is possible to disable the time checks before the first update of the clock by adding `nocerttimecheck 1` to ''/etc/chrony.conf'', but it has an impact on security.


Line 63: Line 63:
== How To Test ==
== How To Test ==


Client NTS is enabled in ''/etc/chrony.conf'' by adding the `nts` option to the `server` or `pool` directive, e.g.
Client NTS is enabled in ''/etc/chrony.conf'' by adding the `nts` option to the `server` or `pool` directive. Some public servers don't use the standard NTS-KE port (4460) yet and need their port to be specified with the `ntsport` option (and also the port allowed by selinux). For example:


     server time.cloudflare.com nts ntsport 1234 iburst
     server nts.sth1.ntp.se iburst nts
     server nts.ntp.se nts ntsport 3443
     server time.cloudflare.com iburst nts ntsport 1234


The installer needs to be tested that it enables NTS in ''/etc/chrony.conf'' as expected.
The installer needs to be tested that it enables NTS in ''/etc/chrony.conf'' as expected.


The `chronyc -N sources` command can be used to verify that NTP sources are responding. The `chronyc ntpdata` command can be used to verify that the NTP sources are authenticated. For example:
The `chronyc -N sources` command can be used to verify that the NTP servers are responding. The `chronyc -N authdata` command can be used to verify that the servers are authenticated with NTS. For example:


     # chronyc -N sources
     # chronyc -N sources
     MS Name/IP address        Stratum Poll Reach LastRx Last sample               
     MS Name/IP address        Stratum Poll Reach LastRx Last sample               
     ===============================================================================
     ===============================================================================
     ^* time.cloudflare.com          3   6   377   28  -115us[ -111us] +/-   13ms
     ^- nts.sth1.ntp.se              1   2   377     4  +1241us[+1241us] +/- 1500ms
     ^+ nts.ntp.se                    2   6  377    27  +212us[ +212us] +/-  22ms
     ^* time.cloudflare.com          3   6  377    47    -28us[ -44us] +/-  11ms
     # chronyc ntpdata | grep Auth
     # chronyc -N authdata
     Authenticated   : Yes
    Name/IP address            Mode KeyID Type KLen Last Atmp  NAK Cook CLen
     Authenticated   : Yes
    =========================================================================
     nts.sth1.ntp.se              NTS    1   15  256  139    0    0    8  100
     time.cloudflare.com          NTS    1   15  256  141    0    0    8  100


== User Experience ==
== User Experience ==

Revision as of 10:17, 26 August 2020

Network Time Security

Summary

Support for the Network Time Security (NTS) authentication mechanism in the NTP client/server (chrony) and installer (anaconda).

Owner

Current status

Detailed Description

NTP is a widely used protocol for synchronization of clocks over network. Authentication of NTP packets is important to prevent a Man-in-the-middle (MITM) attacker from taking full control over the client's clock (e.g. force it to jump to a distant future or past). Several different authentication mechanisms have been specified for NTP. The oldest and simplest one uses secret keys, where each client has its own key which needs to be securely distributed to the server and client. This means it is mostly limited to local networks. Autokey is a newer mechanism based on public-key cryptography, but it was shown to be insecure and it is rarely supported on public servers.

NTS is a new authentication mechanism specified by the IETF for NTP. NTS has an NTS-KE protocol using Transport Layer Security (TLS) to establish the keys and provide the client with cookies which allow the NTP server to not keep any client-specific state. NTP packets are authenticated using Authenticated Encryption with Associated Data (AEAD). NTS is expected to scale well to a large numbers of clients. There are already some public NTP servers with NTS support.

The default NTP client and server on Fedora is chrony. Support for NTS is added in version 4.0. It uses the GnuTLS library for TLS and the Nettle library for AEAD.

NTS is not enabled by default. It can be enabled on clients by adding the nts option to the server or pool directive in /etc/chrony.conf. For example

server time.example.com iburst nts

There are several issues that may prevent NTS from working correctly:

  • Firewalls may block the NTS-KE port.
  • ISPs may block or rate limit longer NTP packets as a mitigation for amplification attacks using NTP mode 6 and 7. NTS-KE supports port negotiation and servers can provide an alternative port to avoid this issue.
  • Computers with no RTC (e.g. some ARM boards), or RTC that is too far from the real time, will fail to verify TLS certificates. It is possible to disable the time checks before the first update of the clock by adding nocerttimecheck 1 to /etc/chrony.conf, but it has an impact on security.

Benefit to Fedora

This change enables Fedora users to securely synchronize the system clock to local or public NTP servers.

Scope

  • Proposal owners:
  1. Update chrony to 4.0 and enable the NTS support (adding dependency on GnuTLS)
  2. Add NTS support to the NTP settings in anaconda
  • Other developers: N/A (not a System Wide Change)
  • Release engineering: N/A (not needed for this Change)
  • Policies and guidelines: N/A (not a System Wide Change)
  • Trademark approval: N/A (not needed for this Change)

Upgrade/compatibility impact

There is no impact as NTS is not enabled by default.

How To Test

Client NTS is enabled in /etc/chrony.conf by adding the nts option to the server or pool directive. Some public servers don't use the standard NTS-KE port (4460) yet and need their port to be specified with the ntsport option (and also the port allowed by selinux). For example:

   server nts.sth1.ntp.se iburst nts
   server time.cloudflare.com iburst nts ntsport 1234

The installer needs to be tested that it enables NTS in /etc/chrony.conf as expected.

The chronyc -N sources command can be used to verify that the NTP servers are responding. The chronyc -N authdata command can be used to verify that the servers are authenticated with NTS. For example:

   # chronyc -N sources
   MS Name/IP address         Stratum Poll Reach LastRx Last sample               
   ===============================================================================
   ^- nts.sth1.ntp.se               1   2   377     4  +1241us[+1241us] +/- 1500ms
   ^* time.cloudflare.com           3   6   377    47    -28us[  -44us] +/-   11ms
   # chronyc -N authdata
   Name/IP address             Mode KeyID Type KLen Last Atmp  NAK Cook CLen
   =========================================================================
   nts.sth1.ntp.se              NTS     1   15  256  139    0    0    8  100
   time.cloudflare.com          NTS     1   15  256  141    0    0    8  100

User Experience

Client NTS can be enabled in the NTP settings in the installer.

Client and server NTS can be enabled by editing /etc/chrony.conf as documented in the chrony.conf man page.

Dependencies

N/A (not a System Wide Change)

Contingency Plan

  • Contingency mechanism: N/A (not a System Wide Change)
  • Contingency deadline: N/A (not a System Wide Change)
  • Blocks release? N/A (not a System Wide Change)
  • Blocks product?

Documentation

N/A (not a System Wide Change)

Release Notes

TBD