From Fedora Project Wiki
(Add gqrx)
(47 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{header|docs}}
{{header|docs}}{{Docs_beat_open}}
 
[[Category:Docs Project]]
 
==== fldigi ====
 
Digital modem program for Linux
 
  Old Version: 3.20.20 -> New Version: 3.20.34
 
Project site: (http://www.w1hkj.com/Fldigi.html)
 


<!-- gpsk31 has been dropped
== gqrx ==
==== gpsk31 ====


PSK31 for Linux with a GTK+ Interface
gqrx has been updated to 2.3.2.  The large number of improvements over 2.2.0 include:


  Old Version: 0.5 -> New Version:


Project site: (http://www.qsl.net/pg4i/linux/gpsk31.html)
*  Support for setting analog bandwidth.
-->
*  Support for setting gain stages individually.
*  Remember visibility status of main toolbar.
*  Restore the geometry of the main window between sessions.
*  Restore the state and placement of the dock windows.
*  Nuand BladeRF support.
*  RF Space SDR-IQ, SDR-IP and Netsdr support.
*  Airspy support.
*  Peak detection on the FFT plot.
*  Max hold on the FFT plot.
*  Audio streaming over UDP socket.
*  Remote control through TCP socket.
*  Set squelch level from current signal/noise level.
*  Command line option to list existing configurations.
*  I/Q recording and playback.
*  Incorrect handling of decimal values in LNB LO frequency.
*  Correctly apply initial LNB LO frequency.
*  Audio output device selection on Mac OS X.
*  Properly store settings when using Save As function.
*  Crash when recording audio with no rec directory set.
*  Only allow audio playback while DSP is running.
*  Ensure DSP is stopped when we exit.
*  Freeze when switching modes after audio recording.
*  Toggling “ignore limits” changes frequency.
*  Include gqrx.dekstop file.
*  Rename scope.svg to gqrx.svg to avoid confusion.
*  Gqrx can fit on small screens (900×600 pixels).
*  Better color gradient for the waterfall.
*  FFT presentation at high rates and high sizes.
*  Make release news available through the Help menu.


==== xastir ====


Amateur Station Tracking and Reporting system for amateur radio


  Old Version: 1.9.8 -> New Version: 2.0.0


Project site: (http://www.xastir.org)
==== pcb ====
An interactive printed circuit board editor
  Old Version: 0.20091103 -> New Version: 0.20100929
Project site: (http://pcb.sourceforge.net)
==== ngspice ====
A mixed level/signal circuit simulator
  Old Version: 21 -> New Version: 22
Project site: (http://ngspice.sourceforge.net)
==== gtkwave ====
Waveform Viewer
  Old Version: 3.3.10 -> New Version: 3.3.20
Project site: (http://gtkwave.sourceforge.net/)
==== gpredict ====
Real-time satellite tracking and orbit prediction program
  Old Version: 0.9.0 -> New Version: 1.3
Project site: (http://groundstation.sourceforge.net/gpredict/)
==== hamlib ====
Run-time library to control radio transceivers and receivers
  Old Version: 1.2.11 -> New Version: 1.2.12
Project site: (http://hamlib.sourceforge.net)
==== iverilog ====
Icarus Verilog is a verilog compiler and simulator
  Old Version: 0.9.20091230 -> New Version: 0.9.20100928
Project site: (http://www.icarus.com/eda/verilog/index.html)
==== xlog ====
Logging program for Hamradio Operators
  Old Version: 2.0.3 -> New Version: 2.0.5
Project site: (http://pg4i.chronos.org.uk/linux/xlog.html)
==== splat ====
Analyze point-to-point terrestrial RF communication links
  Old Version: 1.2.3 -> New Version: 1.3.0
Project site: (http://www.qsl.net/kd2bd/splat.html)
==== soundmodem ====
Soundcard Packet Radio Modem
  Old Version: 0.14 -> New Version: 0.15
Project site: (http://www.baycom.org/~tom/ham/soundmodem/)
===67 packages checked, 12 differences.===
[[Category:Docs Project]]
[[Category:Draft documentation]]
[[Category:Draft documentation]]
[[Category:Documentation beats]]
[[Category:Documentation beats]]

Revision as of 19:16, 5 May 2015

DocsProject Header docTeam1.png
Note.png
Beat is open
This beat is now ready to have Fedora 25 content added by the beat writer

gqrx

gqrx has been updated to 2.3.2. The large number of improvements over 2.2.0 include:


  • Support for setting analog bandwidth.
  • Support for setting gain stages individually.
  • Remember visibility status of main toolbar.
  • Restore the geometry of the main window between sessions.
  • Restore the state and placement of the dock windows.
  • Nuand BladeRF support.
  • RF Space SDR-IQ, SDR-IP and Netsdr support.
  • Airspy support.
  • Peak detection on the FFT plot.
  • Max hold on the FFT plot.
  • Audio streaming over UDP socket.
  • Remote control through TCP socket.
  • Set squelch level from current signal/noise level.
  • Command line option to list existing configurations.
  • I/Q recording and playback.
  • Incorrect handling of decimal values in LNB LO frequency.
  • Correctly apply initial LNB LO frequency.
  • Audio output device selection on Mac OS X.
  • Properly store settings when using Save As function.
  • Crash when recording audio with no rec directory set.
  • Only allow audio playback while DSP is running.
  • Ensure DSP is stopped when we exit.
  • Freeze when switching modes after audio recording.
  • Toggling “ignore limits” changes frequency.
  • Include gqrx.dekstop file.
  • Rename scope.svg to gqrx.svg to avoid confusion.
  • Gqrx can fit on small screens (900×600 pixels).
  • Better color gradient for the waterfall.
  • FFT presentation at high rates and high sizes.
  • Make release news available through the Help menu.
Retrieved from "https://fedoraproject.org/w/index.php?title=Documentation_Amateur_Radio_Beat&oldid=411879"