From Fedora Project Wiki
No edit summary
mNo edit summary
Line 108: Line 108:




Next, review the BPO overview:
Next, review the [http://dev.fed-mod.org/ BPO overview], then check [http://dev.fed-mod.org/modularity/logs/logs.txt the logs] (in case that nothing happens). All repositories dumped by [http://dev.fed-mod.org/modularity/repos/ pungi-signed-repo]
<pre>
http://dev.fed-mod.org/
</pre>
 
Then check logs (in case that nothing happens):
<pre>
http://dev.fed-mod.org/modularity/logs/logs.txt
</pre>
 
Repositories dumped by pungi-signed-repo:
<pre>
http://dev.fed-mod.org/modularity/repos/
</pre>





Revision as of 12:17, 4 August 2016

Abstract

The purpose of this document is to describe systems and services used for generic Modularity development, research and possibly future infrastructure deployments, and is intended as a reference guide for the involved engineers and the so-called doers-of-things.

If you're new to Modularity, start with the following instead:

Systems

We use a number of systems for Modularity work. Some of those are dedicated installations for our cause, some are generic and shared with other Fedora initiatives. This section focuses on the former.

fed-mod.org

The main and currently the only dedicated system we have.

This is an OpenStack instance running Fedora 21. In case the fed-mod.org domain name no longer works, the IPv4 address is 209.132.178.225. We use a shared user account named fedora. If you need access, contact any of the current engineers and provide them with your public SSH key.

Automatic COPR rebuilds

We run automatic COPR rebuilds of certain modularity projects (fm, modulemd and modulemd-resolver) with a cron job every 15 minutes. Edit ~fedora/rebuild_packages.sh to add yours.

Automatic documentation rebuilds

We also run automatic readthedocs.org documentation builds every 15 minutes for fm and modulemd with simple cron jobs.

Metadata service

The metadata-service is deployed on this system and handles all ^/fm/(.+) HTTP requests. This API isn't really defined yet. Browse the project's sources to see how it works.

Status reports and agile tools

Our Taiga status reports are also hosted on this sytem and regenerated every 15 minutes, again, with a cron job.

Other agile tools such as the Modularity Bot or sprint-tools for Trello/Taiga synchronization are also hosted here. See ~fedora/fm-trello-taiga-sync, ~fedora/sprint_tools and the various related cron jobs.

Webhosting in general

The host is running a generic httpd webserver. The configuration is kept in /etc/httpd/conf.d/fm.conf and we use the default web root for our stuff, /var/www/html. For example, the experimental modules repository is hosted there.

Feel free to use this for whatever you need. However, keep in mind the available disk space on this machine is fairly limited.

Services

The high-level purpose of the majority of the services listed below is described in the Modularity/Infra document.

The input

Module input data consists of two main parts — the module definition file in the modulemd format and the components, such as RPMs (coincidentally the only format we currently support but expect that to change at some point in the future). In Fedora, both the modulemd files and the components' SPEC files are stored in dist-git and the associated ACLs are stored in pkgdb (Package Database).

We use namespaces to distinguish between modules and RPMs in those two systems, aptly named modules and rpms.

dist-git

For development and testing purposes we use the staging dist-git instance which supports the above mentioned namespaces. The recommended way to interact with dist-git is using the fedpkg tool and configuring it to interact with this instance.

Once you have installed fedpkg, edit /etc/rpkg/fedpkg.conf (or wherever your fedpkg.conf is located) to change all occurrences of the default pkgs.fedoraproject.org to pkgs.stg.fedoraproject.org.

Here is an example:

Install pag via $ sudo dnf install -y pag. Once you have done this, download and set up the custom rpkg repo:

$ cd /tmp
$ pag clone karsten/rpkg
$ cd rpkg/src
$ git checkout origin/modularity_new

Next, set fpkg to point to stg/rida. To do this, add fedpkg-stage.conf to /tmp/rpkg and input the following content:

[fedpkg]
lookaside = http://pkgs.stg.fedoraproject.org/repo/pkgs
lookasidehash = md5
lookaside_cgi = https://pkgs.stg.fedoraproject.org/repo/pkgs/upload.cgi
gitbaseurl = ssh://%(user)s@pkgs.stg.fedoraproject.org/%(module)s
anongiturl = git://pkgs.stg.fedoraproject.org/%(module)s
tracbaseurl = https://%(user)s:%(password)s@fedorahosted.org/rel-eng/login/xmlrpc
branchre = f\d$|f\d\d$|el\d$|olpc\d$|master$
kojiconfig = /etc/koji-stage.conf
build_client = koji
clone_config =
  bz.default-tracker bugzilla.redhat.com
  bz.default-product Fedora
  bz.default-version rawhide
  bz.default-component %(module)s
  sendemail.to %(module)s-owner@fedoraproject.org
distgit_namespaced = True
ridaurl = https://dev.fed-mod.org:5000/rida

Next, get the sources:

$ fedpkg --config /etc/rpkg/fedpkg-stage.conf co modules/testmodule --anonymous

Here, --anonymous is used in case you are not a packager on stg envt.

Now build:

$ cd testmodule
$ fedpkg --config /etc/rpkg/fedpkg-stage.conf module-build


Next, review the BPO overview, then check the logs (in case that nothing happens). All repositories dumped by pungi-signed-repo


pkgdb

A staging pkgdb instance is also available, storing the modules' ACL entries.

Contact people with the admin ACL privileges for the given module for commit access. Contact User:Ralph if you need a new module pkgdb entry & dist-git repository.

The message bus

We expect to use fedmsg extensively for inter-component communication in all stages of module build, testing and distribution.

However, since we don't do any of those things yet, there's not much to say about this. Read the upstream documentation to see what Fedora Messaging is about.

The module builder

The module builder consists of three main components: the build orchestrator, the koji build system and the pungi compose tool. The basic, overly simplified idea of building modules is:

  1. The client (e.g. the module packager) contacts the orchestrator and requests a build.
  2. The orchestrator does all the heavy lifting -- prepares the buildroot as a koji target, clones and builds all the components in koji in the correct order, run CI checks for components and modules, tracks the build states and rebuilds all dependant modules, if required.
  3. After every module build, the orchestrator notifies pungi which in turn creates module deliverables.

There are still many open questions regarding this process. We will fine-tune the details on the go.

orchestrator

The orchestrator is a service with a publicly available interface that the clients can interact with, for example by issuing fedpkg module-build as a module packager, that orchestrates the complete build of modules as noted above. Note the orchestrator doesn't yet exist and although we don't have any specific design in mind, we expect to have something ready in the near future.

The orchestrator will emit fedmsg messages to interact with other infrastructure components. It will work with PDC to both store (via pdc-updater) and retrieve module dependency graphs. It will also require its own database to track module build states. The public interface will not be an XMLRPC.

And the service will most likely be hosted on fed-mod.org.

koji

The module RPM content will be built in koji. The current idea is to use koji tags and targets to represent modules and tag inheritance to define buildroots for RPM components. The orchestrator needs to be able to manage these.

We expect to use the staging koji instance once we have a usable and somewhat stable orchestrator. Until then, and to allow more flexibility when developing against koji, we also have our own Fedora 24-based koji virtual machines you can play with. They're too large to be shared on fed-mod.org. Contact User:Psabata if you're interested in getting them.

pungi

Once all the components in the module are built, the orchestrator will signal pungi to create deliverables, such as RPM repositories or container images, from the respective koji tags. pungi will also store compose information in PDC (again, via pdc-updater), push the deliverables to mirrors (either directly or via an update system) and interact with various other currently nonexistent RCM tools.

We're considering putting all or most of this functionality directly into koji.

The module knower

We would like to store certain practical bits about modules in PDC (Product Definition Center) so that it can be easily viewed and queried by both humans and other infrastructure tools. Specifically, we're interested in two kinds of information:

  1. Source inter-modular dependencies — useful for tracking what modules need to be rebuilt
  2. Compose information — for listing contents of deliverables

The first use case requires a new data type to be created in PDC.

PDC

There's a staging PDC instance available we hope to use later in the development cycle.

We might set up our own instance on fed-mod.org, if necessary.

pdc-updater

pdc-updater is a simple, stateless service that responds to fedmsg events and populates the PDC database. It already exists but needs some patching to support the new data type we require.

It is unclear whether a staging pdc-updater is available. We might as well deploy our own on fed-mod.org.

The compose magic

Once built, modules could be composed into products such as Fedora Workstation, Fedora Server or maybe even anything the user defines either for integration QA purposes or building custom-tailored system images for and by the end users. See the Modularity/Infra document for more information about these concepts.

CaaS

CaaS is not yet properly designed or implemented. Therefore we haven't thought about deployment either.

Pixie dust

The same for the so-called Pixie dust.

The update system and distribution

Both modules and module composes will need to be held by some unspecified service before they get pushed to the master mirror. This is necessary for two reasons:

  1. Human testing — verifying the builds and composes work fine beyond the capabilities of our CI
  2. Pushing mass rebuild results as one update — simply to avoid broken states on the end users' systems

This might be implemented by patching the current Fedora update system and/or introducing yet another service/layer. We could use the staging bodhi instance for development. Note we have no staging mirrors or systems capable of serving this kind of content at the moment.

Miscellanous

We also use a number of other systems and services.

pagure.io

All of our own code is hosted at pagure.io. Many of the projects grant commit access to the @modularity group. If you'd like to a part of it, just ask any of the current members to add you.

COPR

There's a @modularity project space on COPR where we build & share our tools such as fm, modulemd or modulemd-resolver. All modularity-wg FAS group members should have permissions to create new projects there. Contact any modularity-wg sponsor or administrator to join the group.

Jenkins

We have a number of Fedora Infra Jenkins jobs set up for the CI of our tooling. Contact User:James if you'd like something added there.

GitHub

In order to collect our changes and submit them as pull requests, we have our own forks for some projects which are hosted on GitHub. For grooming prior to submitting things upstream (e.g. reviewing and merging pull requests from individual contributors against our forks), contributors are added to the committers team in the fedora-modularity organization. Please ping Nils Philippsen (github) to get yourself added.

Our forks: