From Fedora Project Wiki

DNS name resolution queries can be secured by DNSSEC to avoid various spoofing attacks. When a local validating DNS resolver is in use, all software can potentially benefit from local DNSSEC validation if the system is configured properly. The root zone provides a global trust anchor that in turn allows for validation of DNS records in signed zones. Other trust anchors can be configured to explicitly protect known DNS subtrees.

Applications that don't understand DNSSEC are transparently protected by the local validating resolver which reports name resolution failure whenever validation of a DNS record fails. On the other hand, applications that know about DNSSEC can distinguish validated DNS records from DNS records in unsigned zones. Such applications can use DNSSEC validated data for example to initiate TLS sessions. A TLS library can do that for the application.

Client side DNSSEC deployment

DNSSEC brings data integrity and authenticity to plain DNS. This is very important, since one can publish different cryptographic (or any trusted) data in DNS database. This enables new types of applications and functionality like:

  • Verify a remote server SSH fingerprint using SSHFP record in DNS (RFC 4255)
  • Verify a TLS certificate offered by the remote server using DANE and TLSA record in DNS (RFC 6698)
  • Get IPsec keys for a particular remote host automatically using IPSECKEY record in DNS (RFC 4025)
  • Get X.509 or OpenPGP certificates using CERT record in DNS (RFC 4398)
  • Verify that a specific Certification Authority is authorized to issue a certificate for a particular domain, using the CAA record in DNS (RFC 6844)


Validating resolver can validate the signed DNS response and set AD flag saying that it did the validation. One may not trust the network-provided DNS resolver and/or the channel (network) between the host and resolver.


There are currently two meaningful approaches for implementing DNSSEC aware applications:

  1. Use some intelligent name resolution library, which is able to do the validation (e.g. getdns library)
  2. Use locally running validating resolver (e.g. Unbound) and trust the AD flag in DNS response


This section explains the solution based on local validating resolver. This approach is beneficial also for applications that are not DNSSEC aware, since these will always get only responses that were validated. This improves the overall security of the system and of all applications that are doing domain name resolution for any purpose.

Idea.png
Blog post discussing development of DNSSEC aware applications
You can find more information in the Writing an application that supports DNSSEC in RHEL and Fedora blog post.


How it works

Note.png
Basic assumption
Note that we are assuming that you are using NetworkManager for your network configuration. For using or testing dnssec-trigger, we recommend using a fully updated Fedora 22 or later.

The solution we are using in Fedora consists of three components:

The purpose of each component is outlined in the following sections.


NetworkManager

In the client side DNSSEC deployment we use NetworkManager as the single source of the network configuration. We also rely on NetworkManager, to be notified on every network configuration change. This is really important, since the locally running validating resolver needs to be always configured properly to be able to successfully resolve domain names.


For communication with NetworkManager we use the Python bindings for libnm-glib. We are consuming the following information:

  • current list of active connections
  • check the Connectivity state (if there is Captive Portal, etc.) not yet done
  • for each connection we inspect
    • if the connection is marked as default by NetworkManager for IPv4 or IPv6 connectivity
    • connection provided DNS resolvers
    • connection provided (search) domains
    • if the connection is VPN


dnssec-trigger

dnssec-trigger daemon and script are responsible for dynamic reconfiguration of Unbound server based on the current network configuration. The dnssec-trigger consists of multiple components, responsible for performing various tests, reconfiguring Unbound server and also user interaction. Most of the behavior is configurable and also the default configuration and behavior differs based on the Fedora Product you are using (e.g. Workstation has different default configuration than Server).

dnssec-trigger script

There are actually two scripts. One is simple Bash script installed in /etc/NetworkManager/dispatcher.d/ which is triggered on every network configuration change by NetworkManager dispatcher. The second is the Python script located in /usr/libexec/dnssec-trigger-script. This script fetches the current configuration from NetworkManager using libnm-glib API and based on the configuration does:

  • tells dnssec-trigger daemon which DNS resolvers it should try to use for global name resolution (These are the resolvers from default connections)
  • adds/removes explicit forward zones directly in Unbound for connection provided domains (regular connection or VPN connection provided) - this effectively configures split DNS
  • may configure forward zones for private address range reverse zones pointing to the connection provided DNS resolvers
  • may add connection provided search domains into /etc/resolv.conf
  • backups/restores /etc/resolv.conf on dnssec-trigger service start/stop
dnssec-trigger daemon

The daemon is responsible for configuring Unbound server properly so it is able to do DNSSEC validation.

TBD

dnssec-trigger panel

The panel is a simple GTK2 panel for user interaction. The user interaction is needed in some situations like when Captive Portal is detected or when the connection-provided resolvers don't support DNSSEC and all fall-back possibilities failed. The panel runs in background and connects to running dnssec-trigger daemon using SSL socket. You can interact with the panel intentionally by clicking on a blue anchor icon in the status bar of your desktop environment. When dnssec-trigger daemon needs some user input, it notifies all connected panels which can create a pop-up dialog and gather user input.

Important.png
This is important
dnssec-trigger panel is not installed by default any more.


Unbound

Unbound is a validating resolver. It runs on 127.0.0.1 port 53. It is possible to configure it statically using its configuration file or dynamically using unbound-control utility. You need to run it as root or be in unbound group. This is also the interface dnssec-trigger daemon and script uses for dynamic Unbound reconfiguration.

Note.png
User-defined configuration
User-defined forward zones are preserved and not overridden by dnssec-trigger.


Installation

dnf install dnssec-trigger

This will get you all necessary packages (most importantly Unbound server) as dependencies.

Note: if you need the dnssec-trigger panel on your desktop environment you need to install the panel by hand:

dnf install dnssec-trigger-panel
Note.png
Product specific configuration
dnssec-trigger uses different configuration for different Fedora Products. At the moment Fedora Workstation uses different configuration. In all other products and non-product environments the configuration is the same.


Getting started

Since Fedora 22, dnssec-triggerd service is enabled by default and thus you can simply reboot. If that is inconvenient, start dnssec-triggerd service manually.

systemctl start dnssec-triggerd

Make sure dnssec-trigger-panel gets started in your session if you don't use GNOME. It's an important piece of the ecosystem as it notifies you when Captive Portal is detected and allows you to perform hotspot signon or disable DNSSEC temporarily. Having user interface at hand is a critical feature when moving between networks. On a headless system with a SSH session, the same actions can be performed using dnssec-trigger-control.

Getting rid of it

The best way to disable the split DNS and DNSSEC functions temporarily is to choose Hotspot signon in the context menu of dnssec-trigger applet to which dnssec-trigger daemon currently responds by doing its best to reset /etc/resolv.conf to a state without dnssec-trigger. Stopping the daemon results in similar behavior. You can perform the same action from the command line as well.

dnssec-trigger-control hotspot_signon

To get back the above functions, you can use the same context menu, just choose Reprobe. Command line variant is also available.

dnssec-trigger-control reprobe

To abandon the features permanently, the best way is to remove dnssec-trigger package. DNF will remove Unbound as well if there is nothing else requiring it on the system.

dnf remove unbound

Configuring unbound manually for split DNS and DNSSEC

Manual configuration via Unbound

TBD

Local zones

TBD

Global zone

TBD

Using dnssec-trigger-control (for testing only)

dnssec-trigger configures /etc/resolv.conf to use a local unbound instance on 127.0.0.1 and Unbound to use a secure global zone with nameservers submitted through dnssec-trigger-control or, if those aren't suitable, using public nameservers run by Fedora or the upstream project.

It also performs captive portal (hotspot) detection and temporarily changes /etc/resolv.conf to include the nameservers of the local network directly. That unfortunately breaks the local zones used with any network interfaces including those that have nothing to do with the captive portal connection.

NetworkManager integration

TBD

Debugging

Show global configuration and connection zones configuration in unbound:

$ unbound-control forward
$ unbound-control list_forwards

To check NetworkManager's view of the configuration, use:

$ nmcli connection show active
$ nmcli connection show active <id/uuid>

Documentation TODO

  • Adding search domains.
  • Common changes that people may wish to make such as the add_wifi_provided_zones
  • When caches are flushed and what triggers that.
  • How issues such as VPN provided name servers are handled.
  • How to restart the services correctly.