From Fedora Project Wiki

(fpc #563: Re-work MPI policy, PYTHON_PATH, remove _cc_name_suffix, remove old packages)
(Minor change from https://fedorahosted.org/fpc/ticket/563#comment:19)
 
Line 20: Line 20:
|[[PackagingDrafts/Fortran|Fortran modules]]||<code>%{_fmoddir}/%{name}</code>
|[[PackagingDrafts/Fortran|Fortran modules]]||<code>%{_fmoddir}/%{name}</code>
|-
|-
|Architecture specific [[Packaging/Python|Python modules]]||<code>%{python2_sitearch}/%{name}
|[[Packaging/Python|Python modules]]||<code>%{python2_sitearch}/%{name}
%{python3_sitearch}/%{name}
%{python3_sitearch}/%{name}
</code>
</code>

Latest revision as of 03:56, 10 November 2015

Introduction

Message Passing Interface (MPI) is an API for parallelization of programs across multiple nodes and has been around since 1994 [1]. MPI can also be used for parallelization on SMP machines and is considered very efficient in it too (close to 100% scaling on parallelizable code as compared to ~80% commonly obtained with threads due to unoptimal memory allocation on NUMA machines). Before MPI, about every manufacturer of supercomputers had their own programming language for writing programs; MPI made porting software easy.

There are many MPI implementations available, such as Open MPI (the default MPI compiler in Fedora and the MPI compiler used in RHEL), MPICH (in Fedora and RHEL) and MVAPICH1 and MVAPICH2 (in RHEL but not yet in Fedora).

As some MPI libraries work better on some hardware than others, and some software works best with some MPI library, the selection of the library used must be done in user level, on a session specific basis. Also, people doing high performance computing may want to use more efficient compilers than the default one in Fedora (gcc), so one must be able to have many versions of the MPI compiler each compiled with a different compiler installed at the same time. This must be taken into account when writing spec files.

Packaging of MPI compilers

The files of MPI compilers MUST be installed in the following directories:

File type Placement
Binaries %{_libdir}/%{name}/bin
Libraries %{_libdir}/%{name}/lib
Fortran modules %{_fmoddir}/%{name}
Python modules %{python2_sitearch}/%{name}

%{python3_sitearch}/%{name}

Config files %{_sysconfdir}/%{name}-%{_arch}


As include files and manual pages are bound to overlap between different MPI implementations, they MUST also placed outside normal directories. It is possible that some man pages or include files (either those of the MPI compiler itself or of some MPI software installed in the compiler's directory) are architecture specific (e.g. a definition on a 32-bit arch differs from that on a 64-bit arch), the directories that MUST be used are as follows:

File type Placement
Man pages %{_mandir}/%{name}-%{_arch}
Include files %{_includedir}/%{name}-%{_arch}


Architecture independent parts (except headers which go into -devel) MUST be placed in a -common subpackage that is BuildArch: noarch.

The runtime of MPI compilers (mpirun, the libraries, the manuals etc) MUST be packaged into %{name}, and the development headers and libraries into %{name}-devel.

As the compiler is installed outside PATH, one needs to load the relevant variables before being able to use the compiler or run MPI programs. This is done using environment modules.

The module file MUST be installed under %{_sysconfdir}/modulefiles/mpi. This allows as user with only one mpi implementation installed to load the module with:

module load mpi

The module file MUST have the line:

conflict mpi

to prevent concurrent loading of multiple mpi modules.


The module file MUST prepend $MPI_BIN into the user's PATH and prepend $MPI_LIB to LD_LIBRARY_PATH. The module file MUST also set some helper variables (primarily for use in spec files):

Variable Value Explanation
MPI_BIN %{_libdir}/%{name}/bin Binaries compiled against the MPI stack
MPI_SYSCONFIG %{_sysconfdir}/%{name}-%{_arch} MPI stack specific configuration files
MPI_FORTRAN_MOD_DIR %{_fmoddir}/%{name} MPI stack specific Fortran module directory
MPI_INCLUDE %{_includedir}/%{name}-%{_arch} MPI stack specific headers
MPI_LIB %{_libdir}/%{name}/lib Libraries compiled against the MPI stack
MPI_MAN %{_mandir}/%{name}-%{_arch} MPI stack specific man pages
MPI_PYTHON2_SITEARCH %{python2_sitearch}/%{name} MPI stack specific Python 2 modules
MPI_PYTHON3_SITEARCH %{python3_sitearch}/%{name} MPI stack specific Python 3 modules
MPI_COMPILER %{name}-%{_arch} Name of compiler package, for use in e.g. spec files
MPI_SUFFIX _%{name} The suffix used for programs compiled against the MPI stack

As these directories may be used by software using the MPI stack, the MPI runtime package MUST own all of them.

MUST: By default, NO files are placed in /etc/ld.so.conf.d. If the packager wishes to provide alternatives support, it MUST be placed in a subpackage along with the ld.so.conf.d file so that alternatives support does not need to be installed if not wished for.

MUST: If the maintainer wishes for the environment module to load automatically by use of a scriptlet in /etc/profile.d or by some other mechanism, this MUST be done in a subpackage.

MUST: The MPI compiler package MUST provide an RPM macro that makes loading and unloading the support easy in spec files, e.g. by placing the following in /etc/rpm/macros.openmpi

%_openmpi_load \
 . /etc/profile.d/modules.sh; \
 module load mpi/openmpi-%{_arch}; \
 export CFLAGS="$CFLAGS %{optflags}";
%_openmpi_unload \
 . /etc/profile.d/modules.sh; \
 module unload mpi/openmpi-%{_arch};

loading and unloading the compiler in spec files is as easy as %{_openmpi_load} and %{_openmpi_unload}.

Automatic setting of the module loading path in python interpreters is done using a .pth file placed in one of the directories normally searched for modules (%{python2_sitearch}, %{python3_sitearch}). Those .pth files should append the directory specified with $MPI_PYTHON2_SITEARCH or $MPI_PYTHON3_SITEARCH environment variable, depending on the interpreter version, to sys.path, and do nothing if those variables are unset. Module files MUST NOT set PYTHONPATH directly, since it cannot be set for both Python versions at the same time.

If the environment module sets compiler flags such as CFLAGS (thus overriding the ones exported in %configure, the RPM macro MUST make them use the Fedora optimization flags %{optflags} once again (as in the example above in which the openmpi-%{_arch} module sets CFLAGS).

Packaging of MPI software

Software that supports MPI MUST be packaged also in serial mode [i.e. no MPI], if it is supported by upstream. (for instance: foo).

If possible, the packager MUST package versions for each MPI compiler in Fedora (e.g. if something can only be built with mpich and mvapich2, then mvapich1 and openmpi packages do not need to be made).

MPI implementation specific files MUST be installed in the directories used by the used MPI compiler ($MPI_BIN, $MPI_LIB and so on).

The binaries MUST be suffixed with $MPI_SUFFIX (e.g. _openmpi for Open MPI, _mpich for MPICH and _mvapich2 for MVAPICH2). This is for two reasons: the serial version of the program can still be run when an MPI module is loaded and the user is always aware of the version s/he is running. This does not need to hurt the use of shell scripts:

# Which MPI implementation do we use?

#module load mpi/mvapich2-i386
#module load mpi/openmpi-i386
module load mpi/mpich-i386

# Run preprocessor
foo -preprocess < foo.in
# Run calculation
mpirun -np 4 foo${MPI_SUFFIX}
# Run some processing
mpirun -np 4 bar${MPI_SUFFIX} -process
# Collect results
bar -collect

The MPI enabled bits MUST be placed in a subpackage with the suffix denoting the MPI compiler used (for instance: foo-openmpi for Open MPI [the traditional MPI compiler in Fedora] or foo-mpich for MPICH). For directory ownership and to guarantee the pickup of the correct MPI runtime, the MPI subpackages MUST require the correct MPI compiler's runtime package.

Each MPI build of shared libraries SHOULD have a separate -libs subpackage for the libraries (e.g. foo-mpich-libs). As in the case of MPI compilers, library configuration (in /etc/ld.so.conf.d) MUST NOT be made.

In case the headers are the same regardless of the compilation method and architecture (e.g. 32-bit serial, 64-bit Open MPI, MPICH), they MUST be split into a separate -headers subpackage (e.g. 'foo-headers'). Fortran modules are architecture specific and as such are placed in the (MPI implementation specific) -devel package (foo-devel for the serial version and foo-openmpi-devel for the Open MPI version).

Each MPI build MUST have a separate -devel subpackage (e.g. foo-mpich-devel) that includes the development libraries and Requires: %{name}-headers if such a package exists. The goal is to be able to install and develop using e.g. 'foo-mpich-devel' without needing to install e.g. openmpi or the serial version of the package.

Files must be shared between packages as much as possible. Compiler independent parts, such as data files in %{_datadir}/%{name} and man files MUST be put into a -common subpackage that is required by all of the binary packages (the serial package and all of the MPI packages).

A sample spec file

# Define a macro for calling ../configure instead of ./configure
%global dconfigure %(printf %%s '%configure' | sed 's!\./configure!../configure!g')

Name: foo
Requires: %{name}-common = %{version}-%{release}

%package common

%package openmpi
BuildRequires: openmpi-devel
# Require explicitly for dir ownership and to guarantee the pickup of the right runtime
Requires: openmpi
Requires: %{name}-common = %{version}-%{release}

%package mpich
BuildRequires: mpich-devel
# Require explicitly for dir ownership and to guarantee the pickup of the right runtime
Requires: mpich
Requires: %{name}-common = %{version}-%{release}

%build
# Have to do off-root builds to be able to build many versions at once

# To avoid replicated code define a build macro
%define dobuild() \
mkdir $MPI_COMPILER; \
cd $MPI_COMPILER; \
%dconfigure --program-suffix=$MPI_SUFFIX ;\
make %{?_smp_mflags} ; \
cd ..

# Build serial version, dummy arguments
MPI_COMPILER=serial MPI_SUFFIX= %dobuild

# Build parallel versions: set compiler variables to MPI wrappers
export CC=mpicc
export CXX=mpicxx
export FC=mpif90
export F77=mpif77

# Build OpenMPI version
%{_openmpi_load}
%dobuild
%{_openmpi_unload}

# Build mpich version
%{_mpich_load}
%dobuild
%{_mpich_unload}

%install
# Install serial version
make -C serial install DESTDIR=%{buildroot} INSTALL="install -p" CPPROG="cp -p"

# Install OpenMPI version
%{_openmpi_load}
make -C $MPI_COMPILER install DESTDIR=%{buildroot} INSTALL="install -p" CPPROG="cp -p"
%{_openmpi_unload}

# Install MPICH version
%{_mpich_load}
make -C $MPI_COMPILER install DESTDIR=%{buildroot} INSTALL="install -p" CPPROG="cp -p"
%{_mpich_unload}


%files # All the serial (normal) binaries

%files common # All files shared between the serial and different MPI versions

%files openmpi # All openmpi linked files

%files mpich # All mpich linked files