From FedoraProject

Revision as of 15:51, 23 March 2011 by Spot (Talk | contribs)

Jump to: navigation, search


Fedora systemd Services

This document describes the guidelines for systemd services, for use and inclusion in Fedora packages.

Unit Files

The systemd equivalent for an SysV initscript is called a Unit file. Each package that contains software that wants/needs to start a service at boot must have a systemd unit file.

SysV Initscripts
Packages may also provide a SysV initscript file, but are not required to do so. This format is considered legacy, but Fedora still contains init mechanisms such as upstart which do not support the systemd unit file format. If present, the SysV initscript(s) must go into an optional subpackage, so as not to confuse sysadmins. The guidelines for SysV initscripts can be found here: Packaging:SysVInitScript
Upstream Support
systemd unit files ideally are reusable across distributions and shipped along the upstream packages. Please consider working with upstream to integrate the systemd files you prepare in the upstream sources. Information for developers on how to integrate systemd support best with their build system you may find on


Unit files for services have a naming scheme of foobar.service. When considering what basename to use, keep the following advice in mind:

  • Unit files must be named after the software implementation that they support, as opposed to the generic type of software. So, a good name would be "apache-httpd.service", and a bad name would be "httpd.service", as there are multiple httpd implementations, but only one Apache httpd.

It is our intention to unify service names of well-known software across distributions, so that we can eventually ship the service files in the upstream packages. Hence it is a good idea to discuss service names with maintainers of the same packages in other distributions and agree on a common name.

Basic format

Case Sensitivity
All fields in a unit file are case sensitive.


Every .service file must begin with a [Unit] section:

Description=A brief human readable string describing the service (not the service file!)

The Description= line must not exceed 80 characters, and must describe the service, and not the service file. For example, "Apache Web Server" is a good description, but "Starts and Stops the Apache Web Server" is a bad one.

After= specifies that this service may only start after the listed services have started. In this example, the service starts after syslog since syslog can be used for logging. (Most daemon programs can use syslog for logging so when in doubt, it's good to include this.)


Next, the .service file must have a [Service] section:


The Type= setting is very important. For D-Bus services this should be "dbus", for traditional services "forking" is usually a good idea, for services not offering any interfaces to other services "simple" is best. For "one-shot" scripts "oneshot" is ideal, often combined with RemainAfterExit=. See for further discussion on the topic. Since "simple" is the default type, .service files which would normally set Type=simple may simply omit the Type line altogether.

BusName= should be set for all services connecting to D-Bus. (i.e. it is a must for those where Type=dbus, but might make sense otherwise, too) Omit this option if your service does not take a name on the bus.

ExecStart= is necessary for all services. This line defines the string that you would run to start the service daemon, along with any necessary options.

ExecReload= should be specified for all services supporting reload. It is highly recommended to add code here that synchronously reloads the configuration file here (i.e. /bin/kill -HUP $MAINPID is usually a poor choice, due to its asynchronous nature). Omit this option if your service does not support reloading.


Finally, the .service file should have an [Install] section:


The recommended parameters for WantedBy= are either (for most system services) or (for services related to the UI). When the user (or our scriptlets) invoke systemctl enable the service will be set to start in these targets.

For more information regarding these options see and

Strictly speaking ExecStart (in the [Service] section) is the only option really necessary for a .service file. However, in Fedora you must add the other options mentioned here (as applicable).

Support for /etc/sysconfig files

If your service supports /etc/sysconfig files, then you must use EnvironmentFile=/etc/sysconfig/foobar in your .service file, in the [Service] section.


ExecStart=/usr/sbin/httpd $OPTIONS
ExecReload=/usr/sbin/httpd $OPTIONS -k restart

You may then refer to variables set in sysconfig files with ${FOOBAR} and $FOOBAR, in the ExecStart= lines (and related lines). (${FOOBAR} expands the variable into one word, $FOOBAR splits up the variable value at whitespace into multiple words)

The "-" on the EnvironmentFile= line ensures that no error messages is generated if the sysconfig file does not exist. Since traditionally sysconfig files have been optional you should always include the "-" when using this directive.

Ideally unit files are shipped along upstream packages. In order to make adoption of upstream unit files easy please do not introduce new /etc/sysconfig files or options, as /etc/sysconfig files are Fedora-specific. Please support sysconfig files only to maintain compatibility with previous Fedora release. The recommended way for administrators to reconfigure systemd service files is to copy them from /lib/systemd/system to /etc/systemd/system and modify them there. Unit files in /etc/systemd/system override those in /lib/systemd/system if they otherwise carry the same name.

Fields to avoid

For most services, we do not want to use requirement dependencies in the [Unit] section, such as Requires= or Wants=. Instead exclusively use ordering dependencies: Before= and After=. This is used to implement loose coupling: if someone asks two services to start at the same time, systemd will properly order their startup but not make it strictly necessary to run one if the other is started.

If you use a requirement dependency, use Wants= rather than Requires=, to make things a little bit more robust. If you use a requirement dependency in almost all cases you should also add an ordering dependency, as ordering and requirement dependencies are orthogonal in systemd.

Here's an example of this common case:

  1. A web application needs postgresql to store its data.
  2. It is set to start After postgresql. On startup, the web application does not start until postgresql does.
  3. Once running, the system administrator needs to restart postgresql due to a config tweak.
  4. Since only After was used, the web application may be temporarily unable to serve some requests but it does not need to restart in order to serve pages after the database comes back up.

Avoid referring to units in all lines taking unit names (such as WantedBy), these are legacy names existing for compatibility with SysV only.

Avoid Names= (in the [Unit] section). Usually it is a better idea to symlink an additional name in the file system. Note that a name listed in Names= is only useful when a service file is already loaded. However, systemd loads only the service files actually referred to in another loaded service, and uses the filenames during the search. Hence a name in Names= is not useful as a search key, but a symlink in the file system is. Also do not put a (redundant) Names=foobar.service line into a file called foobar.service. We want to keep our service files short.

Avoid using StandardOutput=kmsg. Use StandardOutput=syslog instead. (same for StandardError=). syslog is a better target, because it is where service logging should primarily go. While messages written to kmsg eventually end up in syslog too they are normally attributed to the kernel, and lose much of its meta data. StandardOutput=syslog is recommended for all services which generate output on stdout or stderr which shall be piped to syslog. Note that if StandardOutput=syslog is set StandardError=syslog is implied unless StandardError= is explicitly configured too. That basically means that you never need to use StandardError= in normal cases. Just use StandardOutput=syslog. A full description of these options can be found here:

Example Unit file

This is an example systemd unit .service file for ABRT:

Description=ABRT Automated Bug Reporting Tool

ExecStart=/usr/sbin/abrtd -d -s



Systemd allows for three forms of "activated services". These are services that are not (or not necessarily) started explicitly by the user but start when certain other events happen or certain state becomes true. The three forms of activation are #Hardware activation, #Socket activation, and #DBus activation.

Hardware activation

Hardware activation occurs when a service is installed but only turns on if a certain type of hardware is installed. Enabling of the service is normally done with a udev rule. At this time we do not have further guidance on how to write those udev rules. The service itself installs its .service files in the normal places and are installed by the normal systemd scriptlets. These services should never be enabled by the package as they will be enabled by udev.

Link systemd scriptlets to the scriptlets section for systemd

Socket activation

Socket activation occurs when a service allows systemd to listen for connections to a specific socket and, when systemd receives a connection on that socket, it starts the service. To do this, the upstream source needs to have some minor coding work to let systemd listen for connections on the socket and there needs to be a .socket file in %{_lib}/systemd/system/ that tells systemd to listen to that socket and what to start when a connection is received. This is similar in function to inetd and some, but not all, services coded to work with inetd will work with socket activation. Similar to inetd, using socket activation for on-demand loading will impose a startup time penalty so we currently do not use this feature in Fedora.

Currently we do not have guidance on how to write socket files as this is something that needs upstream code and they can add a proper .socket file at the same time.

However, socket activation can also be used to allow parallel startup of services. If a service supports systemd socket activation as described above and we additionally start it explicitly on boot, then systemd will start it but allow things that depend on it to startup at the same time. If the dependent service makes a request to the socket activatable service before it has come up, then systemd will cause the request to wait until the socket activatable service has come up and can process the request. To achieve this effect, the service must be socket activatable as described above, the .service file for the service needs to have a Wants= line for the .socket, and the service must autostart. Since Fedora currently doesn't want any services to do on-demand loading, all socket activated services must autostart.

In practical terms this means if the upstream tarball ships with a socket file you need to contact FESCo to get permission to enable your service on boot. Once you have permission, you can package the .socket file and use the systemd scriptlets that enable the service by default. You need to also check the .service file to make sure it has a Wants= entry on the .socket file as that ensures that starting the service will also inform systemd of the socket.

DBus activation

In order to allow parallel startup of a D-Bus service and its consumers it is essential that D-Bus services can be bus activated and the D-Bus activation request is forwarded from the D-Bus system bus to systemd so that you end up with only a single instance of the service, even if a service is triggered by both boot-up and activation. If historically your D-Bus service was not bus-activated but started via a SysV init script, it should be updated to use bus activation. This may be implemented by dropping a D-Bus .service file in /usr/share/dbus/system-services/ and use the SystemdService= directive therein to redirect the activation to systemd.

systemd and D-Bus both use the .service file suffix but they are different things. In a systemd driven init process, the D-Bus .service file will often refer to the systemd .service file for the same program with the SystemdService directive.

Here's an example for a D-Bus bus-activable service. The ConsoleKit bus activation file /usr/share/dbus-1/system-services/org.freedesktop.ConsoleKit.service:

[D-BUS Service]
Exec=/usr/sbin/console-kit-daemon --no-daemon

And the matching systemd unit file /lib/systemd/system/console-kit-daemon.service:

Description=Console Manager

ExecStart=/usr/sbin/console-kit-daemon --no-daemon

As you can see SystemdService= is used in the D-Bus activation file to bind the systemd service to the D-Bus service.

Traditionally, bus activated D-Bus services could not be disabled without uninstalling them entirely. systemd allows you to disable services by making D-Bus invoke an alias systemd service name (that can be created or removed to enable/disable activation) as an intermediary for the real service.

You can easily implement disabling by directing the D-Bus service to an alias name of the real service file (in the filesystem this shows up as a symlink placed in /etc/systemd/system to the real service file). This alias is then controlled via "systemctl enable" and "systemctl disable". It is a good idea (though technically not necessary) to name this alias name after the D-Bus bus name of the service, prefixed with "dbus-". Example for Avahi, a service that the admin might need to disable: set SystemdService=dbus-org.freedesktop.Avahi.service instead of SystemdService=avahi-daemon.service in the D-Bus activation file, and then make dbus-org.freedesktop.Avahi.service an optional alias of avahi-daemon.service that can be controlled via the Alias= directive in the [Install] section of the systemd service file. This directive is then read by "systemctl enable" and "systemctl disable" to create resp. remove a symlink to make the service available resp. unavailable under this additional name. A full example for the Avahi case:

Here is the D-Bus .service file for Avahi (/usr/share/dbus-1/system-services/org.freedesktop.Avahi.service):

[D-BUS Service]

# This service should not be bus activated if systemd isn't running,
# so that activation won't conflict with the init script startup.

Here is the Avahi systemd unit .service file (/lib/systemd/system/avahi-daemon.service):

Description=Avahi mDNS/DNS-SD Stack

ExecStart=/usr/sbin/avahi-daemon -s
ExecReload=/usr/sbin/avahi-daemon -r


The Alias= line ensures that the existance of the /etc/systemd/system/dbus-org.freedesktop.Avahi.service symlink can be controlled by "systemctl enable" and "systemctl disable".

Note that the creation/removal of the alias symlinks should be done with "systemctl enable" and "systemctl disable" only. You should not create these symlinks manually.

In general, it is also recommended to supply native systemd units for all services that are already bus activatable, so that these services can be controlled and supervised centrally like any other service with tools such as systemctl. A similar logic like the one shown above should apply.

See the D-Bus documentation for more information about bus activation:


Filesystem locations

Packages with systemd unit files must put them into %{_unitdir}. %{_unitdir} evaluates to /lib/systemd/system on all Fedora systems (F-15+). Unit files are architecture independent (hence, not %{_lib}) and needed early in the boot process.

 %files section

Systemd unit .service files must not be marked as %config files. If the user wants to reconfigure a .service file he should copy the .service file from /lib/systemd/system to /etc/systemd/system and edit it there. Unit files in /etc/systemd/system override those in /lib/systemd/system if they carry the same name.

Unit files in spec file scriptlets

Add to scriptletsnippets instead and leave a link here. --abadger1999 15:49, 8 December 2010 (UTC)
Since we turned over which services may autostart to fesco, we need to revise the next paragraph. The current fesco plans allow a great many more things to autostart than previously. It's probably more accurate to say that most services can be on by default if the configuration files they ship with follows certain rules and then link to the fesco document. --abadger1999 02:12, 24 February 2011 (UTC)

Most systemd services must be disabled by default, especially if they listen on the network. On upgrade, a package may only restart a service if it is running; it may not start it if it is off. Also, the service may not enable itself if it is currently disabled.

These are the recommended scriptlets to conform to these requirements

Warning (medium size).png
Only for new services!
At the moment, these Fedora Guidelines are only for new services. Normally this coincides with new packages. Converting existing services from SystemVinit to systemd will require additional scriptlets. To not hold up adoption of new services with systemd unit files, FPC has approved these guidelines without the ability to migrate. The additional information necessary to allow migration to proceed will be available shortly. Draft implementations are being worked out here: User:Toshio/Systemd_scriptlet_options
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units

/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -eq 1 ] ; then 
    # Initial installation 
    /bin/systemctl load apache-httpd.service >/dev/null 2>&1 || :

if [ $1 -eq 0 ] ; then
    # Package removal, not upgrade
    /bin/systemctl --no-reload disable apache-httpd.service > /dev/null 2>&1 || :
    /bin/systemctl stop apache-httpd.service > /dev/null 2>&1 || :

/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
    # Package upgrade, not uninstall
    /bin/systemctl try-restart apache-httpd.service >/dev/null 2>&1 || :

The systemd equivalent to the old SysV 'chkconfig --add <service>' command is 'systemctl load name.service'.

If your service should be enabled by default (which is the exception, see below) then use the following %post scriptlet instead of the one shown above:

/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -eq 1 ] ; then 
    # Initial installation
    /bin/systemctl load apache-httpd.service >/dev/null 2>&1 || :
    /bin/systemctl enable apache-httpd.service >/dev/null 2>&1 || :

Why don't we....

  • Enable most services by default?

Some core services must be enabled by default for a functional system, but the default for most network-listening scripts is off. This is done for better security. We have multiple tools that can enable services, including GUIs.

  • Start the service after installation?

Installations can be in changeroots, in an installer context, or in other situations where you don't want the services autostarted.