From Fedora Project Wiki

< QA‎ | TestPlans

m (Known issues)
(Test results)
Line 70: Line 70:
| style="background-color: lightgreen;"| [[User:atodorov]]
| style="background-color: lightgreen;"| [[User:atodorov]]
| [ Belkin USB 10/100 Ethernet Adapter, model # F5D5050]
| [ Belkin USB 10/100 Ethernet Adapter, model # F5D5050]
|- style="background-color: white;"
| [[QA/TestCases/NM_WEP]]
| style="background-color: lightgreen;"| [[User:atodorov]]
| Open system/Shared key w/ password
|- style="background-color: white;"  
|- style="background-color: white;"  
| [[QA/TestCases/NM_VPN_vpnc]]
| [[QA/TestCases/NM_VPN_vpnc]]

Revision as of 17:06, 5 November 2008

XO Hardware


We should check if XO built in wireless adapter (Marvell Libertas 88W8388 controller and 88W8015 radio) works as specified (

  • Wireless adapter identified by the system and working properly
  • Status leds work as in speciffications (on = registered, blinking = activity) - (atodorov - PASS)
  • 802.11b/g/s connectivity
  • 802.11s functionality when CPU is powered down (BLOCKED by bug #465284 - can't suspend)

Basic Functionality


Testing XO built in wireless adapter to work with standard security protocols/encryption methods.

  • Ability to work with standard protocols and encryption methods:
    • WEP Open/Shared with ASCII/HEX key (atodorov - PR - PASS)
    • WPA/WPA2 with TKIP/AES encryption - need a radius server here...
    • WPA-PSK/WPA2-PSK with TKIP/AES encryption

Advanced Functionality


Ability of the XO built in wireless adapter to operate in more advanced modes like AP-bridge or rfmon.

  • Mode Managed / Ad-Hoc / Master (AP)
  • Ability to change output power
  • RAW monitoring mode (rfmon) support


Network Manager


  • WPA & WPA2 works with NM from Shapshot 3 (rvokal)
  • WEP works with NM (qark, in progress), (atodorov - snap#3 and PR open system/shared key - PASS )

Networking configuration using Network Manager

  • VPN connection
    • vpnc (Cisco compatible) (qark, in progress), (atodorov - snap#3 and PR - PASS )
    • OpenVPN (qark, in progress)

System Config Network


Networking configuration using system-config-network.

Wired networking USB adapters


  • Belkin USB 10/100 Ethernet Adapter, model # F5D5050 - works out of the box with NM on Snap#3 and PR (atodorov)
  • Motorola SURFboard Cable Modem SB5100 - works like a charm with NM and network scripts (rvokal)
  • Ralink RT2501USB wifi dongle - works like a charm on Snap#3 with NM (rvokal)

Test results

Please file your test results in the table below and link to the test case executed. Thanks!

Test Case Result Bug(s) or more info
QA/TestCases/TestCaseTemplate User:YOUR_NAME_HERE bug_number
QA/TestCases/USB_RJ45_Adapter User:atodorov Belkin USB 10/100 Ethernet Adapter, model # F5D5050
QA/TestCases/NM_WEP User:atodorov Open system/Shared key w/ password
QA/TestCases/NM_VPN_vpnc User:atodorov
QA/TestCases/NM_VPN_OpenVPN Are we going to test all of certificate/password, etc?

Color legend

Please use the following format when posting results to this page

Indicates an inprogress or test that needs further review
Indicates a test that has passed
Indicates a failed test ... see Notes for details

Known issues

  • 469835 - NM doesn't identify wireless devices on the XO - usability issue since the XO has 2 wireless devices, mesh and regular. Waiting on upstream work from OLPC.
  • _djr2 reported on IRC that if you set txpower to 20 via iwconfig it drops back to 10ish after a while. Could be related to some internal hardware power management.
  • on some XOs ifwconfig eth0 reports a bit rate of 1/2 Mb/s. Not sure if bug or not. Sugar also reports the same.