QA:Testcase Gnome Color Settings

From FedoraProject

(Difference between revisions)
Jump to: navigation, search
Line 3: Line 3:
 
|setup=
 
|setup=
 
# Make sure the {{package|gnome-control-center}} and {{package|gnome-color-manager}} packages are installed
 
# Make sure the {{package|gnome-control-center}} and {{package|gnome-color-manager}} packages are installed
# Remove any previous configuration by deleting the {{filename|~/.config/gnome-color-manager}} directory
+
# Remove any previous color profiles (FIXME: how do you do this from outside of the panel?)
 
# Ensure no color calibration hardware is connected
 
# Ensure no color calibration hardware is connected
 
|actions=
 
|actions=
 
# Open the Color Settings panel
 
# Open the Color Settings panel
# Make sure  
+
# Make sure the display is visible in the device list
# Start here ...
+
# Click on the display, make sure the "Calibrate" action at the bottom right is disabled
# Next do this ...
+
# Attach a color calibration device, make sure the "Calibrate" action gets enabled
# Finally click that
+
# Click "Calibrate", ensure the wizard allows you to proceed.
 +
# Verify the full screen OSD to attach the device to the screen is shown at the end of the wizard
 +
# Press "Start" on the OSD and verify color patches start drawing on the screen
 
|results=
 
|results=
The following must be true to consider this a successful test run. Be brief ... but explicit.
+
# Ensure the calibration process finishes correctly
# Step #1 completes without error
+
# Ensure the new profile is available from the panel once the process completes
# The system boots into runlevel 5
+
# Program completes with exit code 0
+
 
|optional=Optionally provide hints for exploratory testing.
 
|optional=Optionally provide hints for exploratory testing.
 
}}
 
}}

Revision as of 21:22, 20 March 2013

Contents

Description

This test case tests the basic functionality of the Color Settings panel and hotplugging for colorimeter devices.

Setup

  1. Make sure the Package-x-generic-16.pnggnome-control-center and Package-x-generic-16.pnggnome-color-manager packages are installed
  2. Remove any previous color profiles (FIXME: how do you do this from outside of the panel?)
  3. Ensure no color calibration hardware is connected

How to test

  1. Open the Color Settings panel
  2. Make sure the display is visible in the device list
  3. Click on the display, make sure the "Calibrate" action at the bottom right is disabled
  4. Attach a color calibration device, make sure the "Calibrate" action gets enabled
  5. Click "Calibrate", ensure the wizard allows you to proceed.
  6. Verify the full screen OSD to attach the device to the screen is shown at the end of the wizard
  7. Press "Start" on the OSD and verify color patches start drawing on the screen

Expected Results

  1. Ensure the calibration process finishes correctly
  2. Ensure the new profile is available from the panel once the process completes

Optional

Optionally provide hints for exploratory testing.