QA:Testcase Gnome Color Settings

From FedoraProject

Revision as of 22:24, 20 March 2013 by Martix (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Description

This test case tests the basic functionality of the Color Settings panel and hotplugging for colorimeter devices. Also functionality of the Color Settings panel when adding or removing profile files.

Setup

  1. Make sure the Package-x-generic-16.pnggnome-control-center and Package-x-generic-16.pnggnome-color-manager packages are installed
  2. Remove any previous color profiles set for the display (FIXME: how do you do this from outside of the panel?)
  3. Ensure no color calibration hardware is connected

How to test

  1. Calibration
    1. Open the Color Settings panel
    2. Make sure the display is visible in the device list
    3. Click on the display, make sure the "Calibrate" action at the bottom right is disabled
    4. Attach a color calibration device, make sure the "Calibrate" action gets enabled
    5. Click "Calibrate", ensure the wizard allows you to proceed.
    6. Verify the full screen OSD to attach the device to the screen is shown at the end of the wizard
    7. Press "Start" on the OSD and verify color patches start drawing on the screen
  2. Add profile
    1. Open the Color Settings panel
    2. Make sure the display is visible in the device list
    3. Click on the display, click "Add Profile"
    4. Select "Test Profile: Blue" and press "Add"
  3. Remove profile
    1. Select the blue profile from the list available for the display
    2. Click on "Remove Profile"

Expected Results

  1. Calibration
    1. Ensure the calibration process finishes correctly
    2. Ensure the new profile is available from the panel once the process completes
  2. Add profile
    1. Ensure the monitor turns blue
    2. Ensure the profile is added to the list available for the display
  3. Remove profile
    1. Ensure the monitor color goes back to normal
    2. Ensure the profile is not in the list anymore