m (moved QA:Testcases Installer Boot Methods Netboot (ppc) to QA:Testcase Installer Boot Methods Netboot (ppc): Use QA:Testcase_ prefix)
Revision as of 06:30, 29 June 2011
IBM PowerPC products do not have a BIOS as typical intel-based architectures do. Instead, they offer Open Firmware. Open Firmware provides an interactive shell where you can configure the boot process.
From wikipedia:OpenFirmware ..
Open Firmware (also, 'OpenBoot') is a hardware-independent firmware (computer software which loads the operating system), developed by Sun Microsystems, and used in post-NuBus PowerPC-based Apple Macintosh computers, Sun Microsystems SPARC based workstations and servers, IBM POWER systems, and PegasosPPC systems, among others. On those computers, Open Firmware fulfills the same tasks as BIOS does on PC computers. It is accessed by a user by a Forth-based shell interface. Forth is a powerful high level language. For example, it is possible to program Open Firmware to solve the Tower of Hanoi problem. It was going to be described by IEEE standard IEEE-1275, which was not reaffirmed by the OFWG and has been officially withdrawn by IEEE. Unfortunately, this means it is unavailable from the IEEE.
How to test
- Boot the system under test into Open Firmare. A key sequence may be required to direct the system to boot Open Firmware.
- Locate the file
images/netboot/ppc64.imgfrom the installation source. Copy this file into a directory accessible by your tftpserver. For example,
cp images/netboot/ppc64.img /var/lib/tftpboot/
- Direct the system under test to boot this file. For example, from Open Firmware you may issue a command similar to
- Proceed through installation as desired
- System should boot and start anaconda loader without error
- System can transition to stage2 anaconda