From Fedora Project Wiki

Revision as of 03:44, 10 June 2010 by Rhe (talk | contribs)


A complete installation using a software RAID device for the root (/) file system. For more details on RAID please consult .

How to test

  1. Boot the installer using any available means (boot.iso, CD, DVD, PXE or live image)
  2. Proceed to the partitioning step, select Create Custom Layout and click next
  3. Delete all partitions to start with empty disk(s)
  4. Create the required boot partitions needed for your architecture. This includes /boot and swap
  5. Create at least 2 RAID member partitions. If you have multiple disks, it is preferred to place a RAID member on a separate disk. However, for this test we are not validating data redundancy or an optimal administrative setup. Therefore, it is okay to place all RAID members on the same disk
  6. Create a RAID device (RAID0, RAID1, RAID5 or RAID6) using all RAID member partitions, and choose / as mount point
  7. Complete with installation as desired

Expected Results

  1. Anaconda completes successfully
  2. Reboot successfully into installed system
  3. Confirm that the root filesystem is a RAID device with all expected RAID members by inspecting the contents of /proc/mdstat