From Fedora Project Wiki

(Created page with '{{QA/Test_Case |description=A simple test to determine effect of SATA link power management settings on power consumption. '''Privileges''': Root<br /> '''Runlevel''': singleuser...')
 
Line 10: Line 10:
# Unplug AC power from the laptop.
# Unplug AC power from the laptop.
# run: <code>for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo max_performance > $i; done</code>
# run: <code>for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo max_performance > $i; done</code>
# run: powertop -d -t 60 | grep 'Power usage'
# run: <code>powertop -d -t 60 | grep 'Power usage'</code>
# Record the power usage estimate printed in Watts. This will be the power consumption at the max_performance setting.
# Record the power usage estimate printed in Watts. This will be the power consumption at the max_performance setting.
# run: <code>for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo medium_power > $i; done</code>
# run: <code>for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo medium_power > $i; done</code>
# run: powertop -d -t 60 | grep 'Power usage'
# run: <code>powertop -d -t 60 | grep 'Power usage'</code>
# Record the power usage estimate printed in Watts. This will be the power consumption at the medium_power setting.
# Record the power usage estimate printed in Watts. This will be the power consumption at the medium_power setting.
# run: <code>for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo min_power > $i; done</code>
# run: <code>for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo min_power > $i; done</code>
# run: powertop -d -t 60 | grep 'Power usage'
# run: <code>powertop -d -t 60 | grep 'Power usage'</code>
# Record the power usage estimate printed in Watts. This will be the power consumption at the min_power setting.
# Record the power usage estimate printed in Watts. This will be the power consumption at the min_power setting.



Revision as of 18:57, 21 October 2009

Description

A simple test to determine effect of SATA link power management settings on power consumption. Privileges: Root
Runlevel: singleuser (X11)
ETA: 10 minutes


How to test

  1. Make sure laptop battery is fully charged.
  2. Reboot laptop to single user mode.
  3. Unplug AC power from the laptop.
  4. run: for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo max_performance > $i; done
  5. run: powertop -d -t 60

Expected Results

Please add the following to the results table.

  1. Power consumption for all three link power settings, max_performance, medium_power, min_power.
  2. Your smolt system profile. (no need to resubmit if you have already for one of the other tests)
  3. Please open bugs if you notice any abnormal behavior such as system hangs, kernel oops messages, serious IO performance degradation.
  4. You may return your system to its default state by running the command in step 4 again or just reboot.