From Fedora Project Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Description

This test case tests if /etc/udev/rules.d/70-persistent-net.rules of an existing install is honoured or not.

Setup

Install Fedora 14 on your system.

How to test

1. Verify /etc/udev/rules.d/70-persistent-net.rules exists and has the current names captured. For ex:

This file was automatically generated by the /lib/udev/write_net_rules
program, run by the persistent-net-generator.rules rules file.

You can modify it, as long as you keep each rule on a single
line, and change only the value of the NAME= key.

# PCI device 0x14e4:0x1639 (bnx2) (custom name provided by external tool)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:21:9b:9d:a5:76", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"

# PCI device 0x14e4:0x1639 (bnx2) (custom name provided by external tool)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:21:9b:9d:a5:70", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x10c9 (igb) (custom name provided by external tool)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1b:21:54:33:3c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"

All the interface names can be seen by

[root@fedora14-r610 rules.d]# ls /sys/class/net/
eth0  eth1  eth2  eth3  eth4  eth5  lo

2. Upgrade to Fedora Rawhide Rawhide and boot into Rawhide.

3. Once in Rawhide, verify that the file /etc/udev/rules.d/70-persistent-net.rules exists and names as defined in it are retained.

All the interface names can be seen by

[root@rawhide-r610 rules.d]# ls /sys/class/net/
eth0  eth1  eth2  eth3  eth4  eth5  lo

Expected Results

Network interface names in Fedora Rawhide should be the same as they were in Fedora 14.