From Fedora Project Wiki

(Initial draft)
 
(revise to use templates (and be consistent with firmware raid test))
Line 1: Line 1:
{{QA/Test_Case
{{QA/Test_Case
|description=This install verifies that installing on with multipath block devices works properly.  Specific multipath hardware is required in order to complete this test.
|description={{Template:Storage_device_description|multipath}} Specific multipath hardware is required in order to complete this test.
|actions=
|actions=
# Boot the installer using any available means
# Boot the installer using any available means
# Choose any appropriate installation source, such as NFS or HTTP.
# On the Installation Destination screen, click ''Add a disk...'' under ''Specialized & Network Disks''
# At type of devices step, choose ''Specialized Storage Devices'' and click ''Next''.
# On the ''Multipath Devices'' tab, select all detected multipath devices
# Select the ''Multipath Devices'' tab and inspect the list of disks.  Enable all multipath disks for install
# Partition as you like, but bugs in partitioning that are not related to the multipath device type are outside the scope of this test
# Choose either automated partitioning or custom partitioning if you want to create your own disk layout.
# Complete the installation process, making sensible selections for all other installer options
# Review partitioning layout to confirm installer is installing to multipath device(s).
# Boot the installed system
# Proceed with normal installation
|results=
|results=
# All installable multipath devices are successfully detected by installer and are available for partitioning.
{{Template:Storage_device_results|multipath}}
# Partitions are created and formatted properly.
# Install completes successfully
# System boots successfully recognizing filesystems created on the multipath device(s).
}}
}}


[[Category:Installer Block Device Test Cases]]
[[Category:Installer Block Device Test Cases]]

Revision as of 01:02, 29 March 2014

Description

This test case verifies that installing on a multipath device works properly. Testing on bare metal (not in a virtual machine) is preferred for this test case. Specific multipath hardware is required in order to complete this test.


How to test

  1. Boot the installer using any available means
  2. On the Installation Destination screen, click Add a disk... under Specialized & Network Disks
  3. On the Multipath Devices tab, select all detected multipath devices
  4. Partition as you like, but bugs in partitioning that are not related to the multipath device type are outside the scope of this test
  5. Complete the installation process, making sensible selections for all other installer options
  6. Boot the installed system

Expected Results

  1. All installable multipath devices are successfully detected by installer and are available for partitioning.
  2. Partitions are created and formatted properly.
  3. Install completes successfully.
  4. System boots successfully recognizing filesystems created on the multipath device(s).
Retrieved from "https://fedoraproject.org/w/index.php?title=QA:Testcase_install_to_multipath&oldid=374819"