QA:Testcase nouveau suspend

From FedoraProject

(Difference between revisions)
Jump to: navigation, search
(drop the f11 workaround)
(update suspend instructions)
Line 5: Line 5:
 
# Ensure the file /etc/X11/xorg.conf does not exist, or is a known-good configuration file that uses the 'nouveau' driver
 
# Ensure the file /etc/X11/xorg.conf does not exist, or is a known-good configuration file that uses the 'nouveau' driver
 
# Shut your system down entirely, then start it up again
 
# Shut your system down entirely, then start it up again
# Suspend the system (for e.g. left click the battery icon and click 'suspend')
+
# Suspend the system (for e.g. open the system menu, then click Shutdown and select Suspend)
 
# Resume the system
 
# Resume the system
 
|results=
 
|results=

Revision as of 16:17, 28 September 2010

Description

This test case tests whether suspend / resume works successfully with the Nouveau video driver, with kernel mode setting enabled. You must be using a video adapter supported by the driver, and Rawhide. Your system must be capable of suspending and resuming normally (for instance, with 'nouveau.modeset=0 3' kernel parameter to disable nouveau from interacting with the video adapter).


How to test

  1. Ensure the 'nomodeset' and 'nouveau.modeset=0' kernel parameters are not enabled in your bootloader configuration
  2. Ensure the file /etc/X11/xorg.conf does not exist, or is a known-good configuration file that uses the 'nouveau' driver
  3. Shut your system down entirely, then start it up again
  4. Suspend the system (for e.g. open the system menu, then click Shutdown and select Suspend)
  5. Resume the system

Expected Results

  1. The system should come back with the display correct and at the correct resolution, backlight active, etc.