|Thu August 27, 2009||From 12:00 to 21:00 UTC (8am -> 5pm EDT)||#fedora-qa)|
What to test?
Today's installment of Fedora Test Day will focus on the nash/mkinitrd replacement; Dracut. This page will outline several methods for enabling dracut on your system, and describe different root device storage scenarios where feedback is needed. Whether you run fedora on a laptop, or on a stateless nfs-mounted remote filesystem ... dracut will be used.
If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your system and provide feedback.
The following cast of characters will be available testing, workarounds, bug fixes, and general discussion ...
What's needed to test
- A system with some kind of network connection
- Your hardware profile uploaded to Smolt according to these instructions
- An installed Fedora distribution, either:
How to test?
Update To Rawhide
See the instructions on the Rawhide page on the various ways in which you can install or update to Rawhide. Alternatively, see below ...
Optionally, you may download a non-destructive rawhide live image for your architecture. Tips on using a live image are available at FedoraLiveCD.
To test dracut, you will first need to know how to enable dracut support for the distribution you are testing:
- When testing on Fedora 12 Alpha (or rawhide) - QA:Testcase Dracut switch to host-built ramdisk
- When testing on Fedora 11 - QA:Testcase Dracut switch to locally built ramdisk
- Alternatively, if using the rawhide live image - QA:Testcase_Dracut_live_image
The focus for the dracut test day is to exercise as many different root device partitioning schemas as possible. The following section lists some sample scenarios and provides guidance on creating the partitioning scheme. These tests can be performed on rawhide, Fedora 12 Alpha, Fedora 11 or using the provided live image. In all cases, be sure to confirm you are testing with a dracut generated initial ramdisk image.
|Root=...||Suggested test case|
|root=/dev/dm-0 (encrypted LVM on RAID)||QA:Testcase_anaconda_encrypted_lvm_on_raid|
|Root=...||Suggested test case|
|iSCSI without iBFT||root on iSCSI without iBFT|
|iSCSI with iBFT||FIXME|
|root on NFS||FIXME|
|root on NBD||FIXME|
Report your results
If you have problems with any of the tests, report a bug to Bugzilla usually for the component dracut. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from the first line as a template.
The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). The next two columns should reflect the test you performed and the result. For example, if you tested dracut support for booting a root device using the file system label, you would enter root=LABEL=foo. If any bugs are encountered, be sure to consult How_to_debug_Dracut_problems for guidance and add a link to the bug report in the References column (as in the example line).
|User||Smolt Profile||Test scenario||References|
|jlaska||HW||root=/dev/md0 (RAID) |