From Fedora Project Wiki

m (minor updates)
Line 28: Line 28:
 
== Prerequisite for Test Day ==  
 
== Prerequisite for Test Day ==  
  
List any prerequisite needs for the test event.  A fresh system, virtualized guest, a blank DVD ... a desire to break software?
+
* An updated [http://fedoraproject.org/get-prerelease Fedora 15 pre-release]
 
 
* Usb key
 
* Usb externally connected HD IDE/SATA
 
* Empty HD IDE/SATA/SCSI
 
* Free space on HD
 
 
 
Here's a chunk which is commonly used for most Test Days. Replace XX with whatever Fedora release is pending:
 
 
 
* An updated [http://fedoraproject.org/get-prerelease Fedora XX pre-release], [[Releases/Rawhide|Rawhide]] (tips on installing Rawhide below), or a [http://alt.fedoraproject.org/pub/alt/nightly-composes/desktop/ nightly live image]
 
 
* Your hardware profile uploaded to [http://www.smolts.org Smolt] according to [http://smolts.org/smolt-wiki/Main_Page#Usage these instructions]
 
* Your hardware profile uploaded to [http://www.smolts.org Smolt] according to [http://smolts.org/smolt-wiki/Main_Page#Usage these instructions]
  
 
== How to test? ==
 
== How to test? ==
  
High level details on how a contributor can get involved.  This can include (but not limited to):
+
=== '''Update your machine''' ===
  
* Areas to target with exploratory testing
+
See the instructions on the [[Releases/Branched|Branched]] page on the various ways in which you can install or update to the Branched Release.
* A list of pre-defined test cases to execute
 
* How to report back results
 
  
Here's another common chunk (again, replace XX as above):
+
Install FreeIPA packages using yum:
 
 
=== '''Update your machine''' ===
 
  
If you're running Fedora XX, make sure you have all the current updates for it installed, using the update manager. If you want to try Rawhide, see the instructions on the [[Releases/Rawhide|Rawhide]] page on the various ways in which you can install or update to Rawhide. Or:
+
# yum install freeipa-*
  
 
=== '''Live image''' ===
 
=== '''Live image''' ===
Line 60: Line 47:
 
== Test Cases ==
 
== Test Cases ==
  
Provide a list of test areas or test cases that you'd like contributors to execute.  For other examples, see [[:Category:Test_Cases]].
+
Follow each of these test cases:
 +
 
 +
* [[QA:Testcase_freeipav2_installation]]
 +
* [[QA:Testcase_freeipav2_cli]]
 +
* [[QA:Testcase_freeipav2_ui]]
 +
* [[QA:Testcase_freeipav2_help]]
 +
* [[QA:Testcase_freeipav2_authentication]]
 +
* [[QA:Testcase_freeipav2_delegation]]
 +
* [[QA:Testcase_freeipav2_dns_integration]]
 +
* [[QA:Testcase_freeipav2_migration]]
 +
 
 +
For the following tests you will need 2 machines (one for the server and one for client):
 +
 
 +
* [[QA:Testcase_freeipav2_client_enrollment]]
 +
* [[QA:Testcase_freeipav2_hbac]]
 +
* [[QA:Testcase_freeipav2_nis]]
 +
* [[QA:Testcase_freeipav2_sudo]]
 +
* [[QA:Testcase_freeipav2_netgroups]]
 +
* [[QA:Testcase_freeipav2_automount]]
 +
 
 +
For the following test you will need at least 2 machines (the more, the better):
 +
 
 +
* [[QA:Testcase_freeipav2_replication]]
  
 
== Test Results ==
 
== Test Results ==
  
Construct a table or list to allow testers to post results.  Each column should be a test case or configuration, and each row should consist of test results. Include some instructions on how to report bugs, and any special instructions. Here's an example, from a Palimpsest test day:
+
If you have problems with any of the tests, report a bug to [https://fedorahosted.org/freeipa/ Trac] or to [https://bugzilla.redhat.com Bugzilla] (usually for the [https://bugzilla.redhat.com/enter_bug.cgi?product=freeIPA freeIPA product]). If you are unsure about exactly how to file the report or what other information to include, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from the first line as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to the Smolt profile of the system you tested. For each test case, use the [[Template:result|result template]] to enter your result, as shown in the example result line.
 
 
If you have problems with any of the tests, report a bug to [https://bugzilla.redhat.com Bugzilla] usually for the component [https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&version=13&component=udisks udisks], or [https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&version=13&component=gnome-disk-utility gnome-disk-utility] for bugs in the Palimpsest graphical front end itself. If you are unsure about exactly how to file the report or what other information to include, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from the first line as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to the Smolt profile of the system you tested. For each test case, use the [[Template:result|result template]] to enter your result, as shown in the example result line.
 
  
 
{|
 
{|
 
! User
 
! User
 
! Smolt Profile
 
! Smolt Profile
! [[QA:Testcase_sample_1|Sample test 1]]
+
! [[QA:Testcase_freeipav2_installation|Installation]]
! [[QA:Testcase_sample_2|Sample test 2]]
+
! [[QA:Testcase_freeipav2_cli|CLI]]
! [[QA:Testcase_sample_3|Sample test 3]]
+
! [[QA:Testcase_freeipav2_ui|UI]]
! [[QA:Testcase_sample_4|Sample test 4]]
+
! [[QA:Testcase_freeipav2_help|Help]]
 +
! [[QA:Testcase_freeipav2_authentication|Authentication]]
 +
! [[QA:Testcase_freeipav2_delegation|Delegation]]
 +
! [[QA:Testcase_freeipav2_dns_integration|DNS]]
 +
! [[QA:Testcase_freeipav2_migration|Migration]]
 +
! [[QA:Testcase_freeipav2_client_enrollment|Client enrollment]]
 +
! [[QA:Testcase_freeipav2_hbac|HBAC]]
 +
! [[QA:Testcase_freeipav2_nis|NIS]]
 +
! [[QA:Testcase_freeipav2_sudo|sudo]]
 +
! [[QA:Testcase_freeipav2_netgroups|Netgroups]]
 +
! [[QA:Testcase_freeipav2_automount|Automount]]
 +
! [[QA:Testcase_freeipav2_replication|Replication]]
 
! References
 
! References
 
|-
 
|-
Line 83: Line 101:
 
| {{result|warn}} <ref>Test pass, but also encountered {{bz|54321}}</ref>
 
| {{result|warn}} <ref>Test pass, but also encountered {{bz|54321}}</ref>
 
| {{result|fail}} <ref>{{bz|12345}}</ref>
 
| {{result|fail}} <ref>{{bz|12345}}</ref>
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 +
| {{result|none}}
 
| <references/>
 
| <references/>
 
|-
 
|-

Revision as of 10:56, 14 February 2011

Warning.png
This page is a draft only
It is still under construction and content may change. Do not rely on the information on this page. See http://www.freeipa.org for more details about the FreeIPA project.
Fedora Test Days
Echo-testing-48px.png
FreeIPA v2

Date February 15, 2011
Time all day, UTC

Website http://www.freeipa.org
IRC #fedora-test-day (webirc)

Mailing list
MailSubscribeArchives


Note.png
Can't make the date?
If you come to this page before or after the test day is completed, your testing is still valuable, and you can use the information on this page to test, file any bugs you find as tickets in our trac instance or bugs in Bugzilla, and add your results to the results section. If this page is more than a month old when you arrive here, please check the current schedule and see if a similar but more recent Test Day is planned or has already happened.

What to test?

Today's instalment of Fedora Test Day will focus on FreeIPA v2

Who's available

The following cast of characters will be available testing, workarounds, bug fixes, and general discussion ...

  • Development - Dmitri Pal (dpal)
  • Quality Assurance -

Prerequisite for Test Day

How to test?

Update your machine

See the instructions on the Branched page on the various ways in which you can install or update to the Branched Release.

Install FreeIPA packages using yum:

# yum install freeipa-*

Live image

Optionally, you may download a non-destructive Rawhide live image for your architecture. Tips on using a live image are available at FedoraLiveCD. Live images can be found here.

Test Cases

Follow each of these test cases:

For the following tests you will need 2 machines (one for the server and one for client):

For the following test you will need at least 2 machines (the more, the better):

Test Results

If you have problems with any of the tests, report a bug to Trac or to Bugzilla (usually for the freeIPA product). If you are unsure about exactly how to file the report or what other information to include, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from the first line as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to the Smolt profile of the system you tested. For each test case, use the result template to enter your result, as shown in the example result line.

User Smolt Profile Installation CLI UI Help Authentication Delegation DNS Migration Client enrollment HBAC NIS sudo Netgroups Automount Replication References
Sample User HW
none
Pass pass
Warning warn
[1]
Fail fail
[2]
none
none
none
none
none
none
none
none
none
none
none
  1. Test pass, but also encountered RHBZ #54321
  2. RHBZ #12345