From Fedora Project Wiki
(boot problem from jreiser)
 
Line 16: Line 16:
 
   mount -o ro,loop /mnt2/LiveOS/rootfs.img /mnt3
 
   mount -o ro,loop /mnt2/LiveOS/rootfs.img /mnt3
 
but I cannot find how to specify that in a "root=live..." that dracut understands.  It's also a mystery why so many mounts are necessary.
 
but I cannot find how to specify that in a "root=live..." that dracut understands.  It's also a mystery why so many mounts are necessary.
 +
 +
=== Boot problem solutions ===
 +
# The ''DVD'' isn't built correctly - pungi changes the label of the image without changing the boot config file. Pungi will need to be fixed to handle that. (boot.iso should work fine.)
 +
#* I believe dracut expects spaces to be escaped, so it would need to be: <code>root=live:CDLABEL=Fedora%x2016%x20x86_64%x20DVD</code>
 +
#* As a workaround, you could just boot with <code>root=live:/dev/sr0</code>
 +
# The mounts are necessary because treebuilder images are live images, and '''all live images are ext4 images inside squashfs images inside an iso (CD/DVD) or vfat (USB stick) filesystem'''.
 +
#* Yes, that does seem needlessly complicated
 +
#* No, there isn't a simpler way to do it right now

Revision as of 17:05, 8 August 2011

Boot problem (jreiser)

[2011-08-06 0000 UTC] Upon boot of DVD, then dracut drops to shell with the message:

 Warning: No root device "live:/dev/disk/by-label/Fedora" found.

The file is present as

 /dev/disk/by-label/Fedora 16 x86_64 DVD

with those three spaces. Reboot with quoting (single, or double, or backslash) also fails. Altering the boot parameter to

 root=ID=ata_SONY_DVD_RW_AW_G-170A

also fails [that name is in my /dev/disk/by-id].

[2011-08-06 1700 UTC] After modifying pungi so that the label of the DVD has dashes "Fedora-16-x86_64-DVD" and changing the boot command line to include the dashes "root=live:CDLABEL=Fedora-16-x86_64-DVD", then dracut still complains "No root device \"live:/dev/disk/by-label/Fedora-16-x86_64-DVD\" found". The device is there, symlinked to ../../sr0 ==> /dev/sr0, and that is the correct name of the hardware drive.

[2011-08-07 0400 UTC] In the emergency shell after dracut cannot find the root, I can find it by:

 mkdir /mnt1 /mnt2 /mnt3
 mount -o ro,loop /dev/sr0 /mnt1
 mount -o ro,loop /mnt1/images/install.img /mnt2
 mount -o ro,loop /mnt2/LiveOS/rootfs.img /mnt3

but I cannot find how to specify that in a "root=live..." that dracut understands. It's also a mystery why so many mounts are necessary.

Boot problem solutions

  1. The DVD isn't built correctly - pungi changes the label of the image without changing the boot config file. Pungi will need to be fixed to handle that. (boot.iso should work fine.)
    • I believe dracut expects spaces to be escaped, so it would need to be: root=live:CDLABEL=Fedora%x2016%x20x86_64%x20DVD
    • As a workaround, you could just boot with root=live:/dev/sr0
  2. The mounts are necessary because treebuilder images are live images, and all live images are ext4 images inside squashfs images inside an iso (CD/DVD) or vfat (USB stick) filesystem.
    • Yes, that does seem needlessly complicated
    • No, there isn't a simpler way to do it right now