From Fedora Project Wiki

Fedora 18 for ARM Remixes

Some ARM devices are not officially supported by Fedora because of proprietary drivers and firmware that do not meet the Fedora guidelines. Below includes a list of devices and links to unsupported Fedora Remixes.

Raspberry Pi

The Raspberry Pi is supported by work done at Seneca College in Toronto, Canada. You can find more information by visiting their site, including links to current release images

http://cdot.senecacollege.ca/raspberry_pi_fedora_remix

Allwinner A10

Hans de Goede has released an Allwinner A10 remix supporting a variety of devices including the Gooseberry development board, Mele, Mini-X, mk802 and mk802ii and more. It can be downloaded from:

http://scotland.proximity.on.ca/contrib-images/hansg

For a list of all supported boards and full installation instructions see the README.

Cubieboard

Tekkaman Ninja has released a Cubieboard Remix (using the mali driver). For full installation instructions please see Cubie_Board.

Samsung Exynos 5 Dual Core Cortex A15

Samsung Chromebook

There is not currently a finished remix for this device, but very alpha instructions for building your own are available at Architectures/ARM/Samsung_Chromebook_2012. You might also try Darryl Pierce's instructions on his blog. Finally, Daniel P Berrangé has posted an installation script on his blog

Arndale Board

Tekkaman Ninja has released a Arndale Board Remix. For full installation instructions please see Arndale_Board.

HP Touchpad

There is not currently a finished remix for this device, Rob Clark's instructions for building your own are available at https://github.com/freedreno/touchpad-fedora.

Genesi Efika MX Smartbook

There is work being done on getting the Genesi Smartbook to function nicely with a recent Fedora release. The Smartbook has a Freescale i.MX515 (ARM Cortex-A8 800MHz) SOC with 512MB RAM. Go to the Fedora ARM Genesi Smartbook page for the current status of the hardware support and installation instructions.

Creating your own Remix

Anybody can create a remix of Fedora 18 for their ARM device. Generally all that is needed is an appropriate kernel for the hardware in question. See Architectures/ARM/Installer for an introduction into building images based on a kickstart file. You can also download a tarball of a generic root filesystem for use with your own custom kernel: