2011-02-24 Intel

In other languages: русский (ru) [edit]

DATE	TIME	WHERE
Thu Feb 24, 2011	All day	#fedora-test-day)	webchat

What to test?

Today's Fedora Test Day will focus on the Intel graphics card driver.

If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion...

Development - Adam Jackson (ajax)
Quality Assurance - Adam Williamson (adamw)

What's needed to test

An Intel graphics adapter (i810 or later, except GMA 500 / Poulsbo)
An updated Fedora 42 pre-release, or the special live image (see below)
Your hardware profile uploaded to Smolt according to these instructions

How to test?

Update your machine

If you're running Fedora 42, make sure you have all the current updates for it installed, using the update manager. Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 42 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture	SHA256SUM
i686	4553b73f8fab46fbb85384974decc7f9595e5c7af6df76e303cef5e62a76e07f
x86_64	e59d1886f7b766011b89d88369d09a4dd46bd7ba8a25664e9de0430d0f8725d7

Testing

Follow each of these test cases:

QA:Testcase_intelvideo_basic
QA:Testcase_intelvideo_gnome3 - ALL post-865 cards should support Shell: if you get fallback mode, please report the test as warn and file a bug
QA:Testcase_intelvideo_dpms
QA:Testcase_intelvideo_xv - NOTE: Totem is known to crash when trying to open a file, run totem filename from a console or double-click a video file to test
QA:Testcase_intelvideo_rotate
QA:Testcase_intelvideo_restartx
QA:Testcase_intelvideo_rendercheck (can take some time to complete, from 10 minutes to an hour or two)
QA:Testcase_intelvideo_glx
QA:Testcase_intelvideo_fastuserswitch
QA:Testcase_intelvideo_vt
QA:Testcase_intelvideo_suspend

Multihead test case:

QA:Testcase_intelvideo_multihead

You will need two or more monitors to perform the multihead test.

Optional extended OpenGL test cases (some of these will require you to at least move around in games):

These will provide more detailed testing of 3D functionality. Please file bugs for any failures you find if running these tests.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-intel. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, use the result template to enter your result, as shown in the example result line. If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 8086) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

Main results

User	Smolt Profile	Basic test	GNOME 3 start	DPMS	XVideo	Rotation	X restart	Rendercheck	GLX	User switch	VT switch	Suspend	Multihead	Comments
Example user	HW	pass	pass	pass	pass	pass	pass	pass	pass	pass	N/A	fail ^[1]	warn ^[2]	↑ RHBZ #123456 ↑ RHBZ #234567
Artur Szymczak	HW	pass	pass	pass	pass	pass	pass	pass	pass	pass	pass	N/A	N/A
kparal	HW	pass	pass	warn ^[1]	pass	pass	warn ^[2]	pass ^[3]	pass	pass	pass	pass	fail ^[4] ^[5] ^[6]	00:02.0 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) ↑ RHBZ #582532 ↑ I saw some Xserver traceback after logging out, but I am not able to reproduce it again. ↑ File:Kparal 20110224 renderchecklog.gz ↑ RHBZ #680066 ↑ RHBZ #639229 ↑ RHBZ #639243
ignotusp	HW	pass	pass	pass	warn ^[1]	none	none	none	none	none	none	none	none	↑ RHBZ #675040
Matěj Cepl	HW	pass	pass	pass	fail ^[1]	pass	pass	pass ^[2]	pass	pass	pass	pass	pass	↑ RHBZ #679776 ↑ [1] I tested also pymol and mesa-demos w/o any issues
laputa	HW	pass	pass	pass	pass	warn ^[1]	pass	pass ^[2]	pass	pass	pass	fail	pass	↑ RHBZ #679990 ↑ [2]
Jaroslav Pulchart	HW	pass	pass	pass	pass	pass	pass	pass ^[1]	pass	pass	pass	pass	warn ^[2] ^[3] ^[4] ^[5] ^[6]	↑ File:Jaroslav.Pulchart 945GME renderchecklog.gz ↑ 1024x600 + 1920x1200 ↑ Gnome 3 shell: First connection to second monitor is "OK" but very slow (mutter 95% CPU). After disconnecting it is OK and resolutions are switched automatic. But second connection killed Gnome3 session. ↑ RHBZ#680037 ↑ Gnome 3 fallback: is OK ↑ XV slow
bojan	HW	pass	pass	pass	pass	pass			pass		pass
jhs	HW	pass	pass	pass	pass	pass	pass	N/A	pass	warn ^[1]	pass	fail ^[2]	none	↑ RHBZ #680098 ↑ RHBZ #680104
Reinout van Schouwen	HW	pass	pass	pass	pass	pass	inprogress	pass ^[1]	pass	inprogress	pass	pass	pass ^[2]	↑ File:Renderchecklog reinouts dell.gz ↑ File:Xrandr reinouts dell.gz
Steve Gordon	HW	pass	pass	pass	pass	pass	fail ^[1]	pass ^[2]	pass	fail ^[3]	pass	fail ^[4]	none N/A	↑ RHBZ#680132 ↑ https://fedoraproject.org/wiki/File:Sgordon_rendercheck.txt ↑ "Unable to start new display. The name org.gnome.DisplayManager was not provided by any .service files" on attempting to switch user from gnome-shell. Suspect this is not however a driver bug? ↑ RHBZ#680142
Uwe Kleine-König	HW	pass ^[1]	warn ^[2]	pass	fail ^[3]	pass			warn ^[4]		pass	pass	fail ^[5]	none	Hardware: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] + [8086:2792] ↑ but note that when starting e.g. a Terminal I get some artifacts at the left border of the screen ↑ only got fallback, starting gnome-shell --replace works, but is too slow to use ↑ In fullscreen the time slider wasn't available, only blinked a few times just to disappear again plus some strange effects on the Desktop even after totem segfaulted (reported using that crash applet). All that without compositing. ↑ reported ~60 FPS, but damn slow ↑ gnome spans both monitors, but I cannot disable one of them; it is instantly reenabled, related bugreport
dawb	HW	pass	pass	pass	pass	pass	pass	pass	pass	pass	pass	pass	none N/A	All worked perfectly (and better than my current F13 install).
User	Smolt Profile	Basic test	GNOME 3 start	DPMS	XVideo	Rotation	X restart	Rendercheck	GLX	User switch	VT switch	Suspend	Multihead	Comments
David Juran	HW	pass	pass										pass ^[1]	↑ worked flawlessly including taking the laptop out of the docking station and replacing it
Sai Vinoba	HW	pass	pass	pass	pass	pass	pass	pass	pass	pass	pass	pass	NA
User	Smolt Profile	Basic test	GNOME 3 start	DPMS	XVideo	Rotation	X restart	Rendercheck	GLX	User switch	VT switch	Suspend	Multihead	Comments

Extended 3D tests

User	Smolt Profile	Pymol	Avogadro	OpenArena	Tux Racer	mesa-demos	Comments
Example user	HW	pass	pass	N/A	fail ^[1]	warn ^[2]	↑ RHBZ #123456 ↑ RHBZ #234567
User	Smolt Profile	Pymol	Avogadro	OpenArena	Tux Racer	mesa-demos	Comments

[bz123456-1] RHBZ #123456

[bz234567-2] RHBZ #234567

[bz582532-3] RHBZ #582532

[4] I saw some Xserver traceback after logging out, but I am not able to reproduce it again.

[5] File:Kparal 20110224 renderchecklog.gz

[bz680066-6] RHBZ #680066

[bz639229-7] RHBZ #639229

[bz639243-8] RHBZ #639243

[bz675040-9] RHBZ #675040

[bz679776-10] RHBZ #679776

[11] [1]

[bz679990-12] RHBZ #679990

[13] [2]

[14] File:Jaroslav.Pulchart 945GME renderchecklog.gz

[15] 1024x600 + 1920x1200

[16] Gnome 3 shell: First connection to second monitor is "OK" but very slow (mutter 95% CPU). After disconnecting it is OK and resolutions are switched automatic. But second connection killed Gnome3 session.

[17] RHBZ#680037

[18] Gnome 3 fallback: is OK

[19] XV slow

[bz680098-20] RHBZ #680098

[bz680104-21] RHBZ #680104

[22] File:Renderchecklog reinouts dell.gz

[23] File:Xrandr reinouts dell.gz

[24] RHBZ#680132

[25] ttps://fedoraproject.org/wiki/File:Sgordon_rendercheck.txt

[26] "Unable to start new display. The name org.gnome.DisplayManager was not provided by any .service files" on attempting to switch user from gnome-shell. Suspect this is not however a driver bug?

[27] RHBZ#680142

[28] ut note that when starting e.g. a Terminal I get some artifacts at the left border of the screen

[29] y got fallback, starting gnome-shell --replace works, but is too slow to use

[30] In fullscreen the time slider wasn't available, only blinked a few times just to disappear again plus some strange effects on the Desktop even after totem segfaulted (reported using that crash applet). All that without compositing.

[31] reported ~60 FPS, but damn slow

[32] spans both monitors, but I cannot disable one of them; it is instantly reenabled, related bugreport

[1]

[2]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[1]

[2]

[1]

[2]

[1]

[2]

[3]

[4]

[5]

[6]

[1]

[2]

[1]

[2]

[1]

[2]

[3]

[4]

[1]

[2]

[3]

[4]

[5]

[1]

[1]

[2]

Search

Test Day:2011-02-24 Intel

Contents