Kernel Testing
Fedora 17
Fedora 18
kernel-3.8.1-202.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | Boot qemu-system-arm-1.2.2-6.fc18, using DTB. | ||
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
Fbdev Xorg LogOmapdrm Xorg Log |
Trimslice Bare/Value Pro | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
n/a | U-Boot 2012.04.01-1.02 xorg log |
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | mlangsdorf | SATA | ![]() |
![]() |
![]() |
n/a | n/a | |
Beagleboard XM | n/a |
kernel-3.8.2-202.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | fpaste, qemu-system-arm-1.2.2-6.fc18 w/ DTB. | ||
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
Omap Driverfbdev |
Trimslice Bare/Value Pro | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
Xorg log Runlevel 3 boots to HDMI, startxfce4 unable to find screen. |
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | pbrobinson | SD | ![]() |
![]() |
![]() |
![]() |
not tested | needs omap3-beagle-xm.dtb supplied with kernel |
Kirkwood | pwhalen | MicroSD | ![]() |
![]() |
![]() |
![]() |
n/a | No dtb required. |
kernel-3.8.2-203.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | fpaste | ||
Pandaboard | SD | |||||||
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a |
kernel-3.8.2-209.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | n/a | n/a | ||||
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
fbdev xorgOMAP xorg |
Trimslice Bare/Value Pro | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
xorg. Using new DTB. |
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a | |||||||
Kirkwood | pwhalen | MicroSD | ![]() |
![]() |
![]() |
![]() |
n/a |
kernel-3.8.3-201.fc18
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
![]() |
n/a | n/a | Division by zero in kernel. To boot this kernel qemu 1.4 or greater is required. | |
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
|
Trimslice Bare/Value Pro | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
|
Trimslice Pro/H/H250 | USB | n/a | ||||||
Highbank | pwhalen | SATA | ![]() |
![]() |
![]() |
![]() |
n/a | boot log |
Beagleboard XM | n/a | |||||||
Kirkwood | pwhalen | MicroSD | ![]() |
![]() |
![]() |
![]() |
n/a | GuruPlug Server Plus |
Fedora 19
kernel-3.7.0-0.rc3.git2.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Storage | Display | Final Notes |
---|---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | ![]() |
![]() |
![]() |
selinux needs to be in permissive mode, dtb required. | ||||
Versatile Express+XFCE (Qemu) | |||||||||
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
na | selinux needs to be in permissive mode. |
Pandaboard+XFCE | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
selinux needs to be in permissive mode. |
Trimslice Bare/Value Pro | SD | n/a | |||||||
Trimslice Pro/H/H250 | SATA | n/a | |||||||
Highbank | pwhalen | ![]() |
n/a | [fpaste] | |||||
Beagleboard XM | |||||||||
Kirkwood (sheevaplug, dreamplug, guruplug, etc) | |||||||||
Efika SmartTop iMX | n/a |
kernel-3.7.0-4.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | ![]() |
n/a | n/a | n/a | fpaste | ||
Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
Pandaboard | SD | n/a | ||||||
Pandaboard+XFCE | ||||||||
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a | |||||||
Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a | |||||||
Efika SmartTop iMX | n/a |
kernel-3.8.0-0.rc2.git3.2.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | ![]() |
n/a | n/a | n/a | fpaste | ||
Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
Pandaboard | pwhalen | SD | ![]() |
n/a | fpaste | |||
Pandaboard+XFCE | ||||||||
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a | |||||||
Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a | |||||||
Efika SmartTop iMX | n/a |
kernel-3.8.0-0.rc4.git1.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk image | ![]() |
n/a | n/a | n/a | Using dtb added to the boot script, fpaste of boot | |
Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
Pandaboard | SD | n/a | ||||||
Pandaboard+XFCE | ||||||||
Trimslice Bare/Value Pro | pwhalen | SD | ![]() |
n/a | Tested using U-Boot 2012.04.01-1.01, with dtb, fpaste | |||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a | |||||||
Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a | |||||||
Efika SmartTop iMX | n/a |
kernel-3.8.0-0.rc5.git2.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | n/a | ||
Versatile Express+XFCE (Qemu) | n/a | n/a | ||||||
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
http://fpaste.org/sWoa/ |
Trimslice Bare/Value Pro | pwhalen | SD | ![]() |
n/a | Install | |||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a | |||||||
Kirkwood (sheevaplug, dreamplug, guruplug, etc) | n/a |
kernel-3.8.0-0.rc7.git0.2.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | Did not boot (with or without dtb) | ||
Pandaboard | SD | |||||||
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a |
kernel-3.9.0-0.rc1.git0.1.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | Fpaste qemu-system-arm-1.2.2-6.fc18, using DTB. | ||
Pandaboard | SD | |||||||
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a |
kernel-3.9.0-0.rc1.git1.2.fc19
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | pwhalen | Disk Image | ![]() |
n/a | n/a | Division by zero in kernel | ||
Pandaboard | pwhalen | SD | ![]() |
![]() |
![]() |
![]() |
![]() |
Install. Dmesg snippet. Kernel will boot when warm booted from a 3.8 kernel (3.8 upgrade to 3.9, reboot works). When the system is then rebooted again (or shutdown and booted), it stops at 'Starting the Kernel..' . This was confirmed on both a Panda and Panda ES. |
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a |
Kernel ?
To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.
Hardware | Who | media | boot | Network | Serial | USB | Display | Final Notes |
---|---|---|---|---|---|---|---|---|
Versatile Express (Qemu) | Disk Image | n/a | n/a | |||||
Pandaboard | SD | |||||||
Trimslice Bare/Value Pro | SD | n/a | ||||||
Trimslice Pro/H/H250 | SATA | n/a | ||||||
Highbank | n/a | |||||||
Beagleboard XM | n/a |