- 1 Network enablement and network configuration
- 2 Modes of configuration
- 3 Selection of device to be enabled in installer
- 4 Wireless
- 5 IPv6
- 6 Configuration files
- 7 Bugs and issues
- 8 Anaconda UX redesign
- 9 Newui networking TODO, notes, questions
Network enablement and network configuration
Network enablement in installer
Configure and activate a network device to be used during installation, e.g. to get kickstart, packages, or for network-backed storage. The configuration can be supplied with boot parameters, or kickstart, or if needed user will be prompted to configure a device in UI. Network enablement can happen in loader or in stage 2:
- In loader:
- if using kickstart
- if network is needed in loader, e.g. to fetch kickstart or updates over network, if installing over vnc, or running sshd in installer
- in rhel (stage 2 is not included in initrd) also in case of using remote stage 2, and in rhel 5 also in case of using remote repositories.
- if using kickstart
- In stage 2, using text mode UI or GUI:
- when setting up network attached storage (iscsi, fcoe)
- when using network repository
Additional devices can be activated in GUI, using NetworkManager Connection Editor (nm-c-e) by checking Connect Automatically. Since RHEL 6 and Fedora 16, additional devices can be activated (in loader) using kickstart network option
--activate (this can be needed e.g. when downloading packages from one NIC/subnet and having iSCSI target on separate NIC/subnet). Activation of additional devices for iSCSI in GUI can be done also by invoking nm-c-e from Advanced Storage Options dialog (since F17?/RHEL6.3)
Once the device is activated, it can't be reactivated with changed configuration (e.g. static configuration with fixed nameserver, see bug 504983). I want to offer this possibility in GUI which requires option to activate/disconnect a device on demand (see device activation). It can be worked around by editing configuration files.
Network configuration of target system
Can be done with kickstart or in GUI using nm-c-e. Undesirably, checking Connect Automatically in nm-c-e will activate the device after the configuration is saved (see ONBOOT side-effect). I am not aware of any problems caused by this side effect which is invisible to the user (Anaconda doesn't wait for NetworkManager activating the device), but I can imagine there might be some lurking.
As you can see, configuration of installer environment and target system is not separated. It is because using nm-c-e for enablement we have to use the same configuration files. At the end of installation the config files are copied to target system.
On Live CD, network is configured in Live CD environment using NetworkManager Applet on panel. We don't copy ifcfg files in this case as up to F14 NM didn't store configuration in ifcfg files by default. The situation may have changed in F15 with NM 0.9 (TODO bug numbers).
Modes of configuration
These anaconda boot options can be used to enable network in loader (e.g. for getting kickstart, updates image, or for vnc):
asknetwork, dhcpclass, dhcptimeout, dns, essid, ethtool, gateway, ip, ipv6, ksdevice, linksleep, mtu, netmask, nicdelay, noipv4, noipv6, wepkey, wpakey.
network command can be used both to enable and configure devices. The behaviour has been changing in the course of adoption of NM.
- RHEL 5 - in case of network installation the first
networkcommand from kickstart activates or reactivates (if the device has already been enabled e.g. to get kickstart using default DHCP or configuration given in boot parameters) relevant device with configuration set by the command. For non-network installs (e.g. for media or hd install) the device of the first network command is only configured for target system. Other
networkcommands only set configuration for target system, the devices are not activated in installer.
- RHEL 6.0, Fedora 15 - the same as in RHEL 5, but already activated device is not reactivated with configuration set in network command , it is only configured for the target system. Another difference from RHEL 5 is that the first network command device is activated also for non-network installs .
- RHEL 6.1, Fedora 16 - expected behaviour is the same as in RHEL 5 (bug 668395) with option to activate additional devices using new
network --activateoption (bug 638131). Note that the device from first
networkcommand is (re)activated regardless of the option (to keep the behaviour of RHEL 5).
For RHEL 6.0, Fedora 14, and later, devices that are supposed not to be activated in installer and have
onboot option set will be activated just before downloading packages due to ONBOOT side-effect. We have no reports of problems caused by this, but in some cases activation of the device could cause change of routing table making packages inaccessible.
Loader text UI
Serves for selection and/or configuration of a network device that should be enabled in loader. It is skipped if the information is provided via boot options or kickstart unless required by boot option
asknetwork. Configuration options of this UI are a subset of nm-c-e which is used in GUI.
Once the device is successfully activated, there is no possibility to change its configuration in loader UI (see bug 504983).
Configuration of selected device:
The IPv6 options correspond to following options of nm-c-e:
- Automatic, DHCP only
If both IPv4 and IPv6 configuration is enabled, failing IPv4 configuration of activated device means that activation is considered as failing overall (which corresponds to Require IPv4 addressing for this connection to complete checked in nm-c-e or
Static (Manual) configuration:
- Gateway: entry is used both for IPv4 and IPv6, only one gateway is allowed. Bad, considtent with boot options and kickstart.
- Name Server: entry can contain more name servers separated by comma.
- IPv4 Address: and IPv6 Address: is present only if manual configuration of respective protocol is selected in previous dialog.
When enabling network in stage 2, this device selection / network enablement confirmation dialog appears:
Selected device will then be configured using NetworkManager Connection Editor (nm-c-e):
nm-c-e is run as separate process. Anaconda should ensure that the selected device will be actually activated in installer.
More of target system network configuration (beyond the devices that has been enabled in installer and the configuration they used) can be done from hostname screen by clicking on Configure Network button:
The saved (target system) configuration will not be applied to device that have been already activated in installer environment. To achieve this, the device must be deactivated and reconnected which can be done only from shell in
tty2, for example by editing of configuration files. See this issue for details.
On the other hand, the device which had not been activated yet will be activated by checking Connect Automatically.
Text mode UI
Rather limited compared to nm-c-e.
Editing configuration files
Anaconda is communicating with NetworkManager mostly with
ifcfg files (nm-c-e stores its configuration there too). It can be handy to edit them directly for debugging or as workaround solution. Files can be edited using shell in virtual terminal
tty2 ([Ctrl][Alt][F2]). Their location is
/etc/sysconfig/netwrok-scripts/ifcfg-<device name>. The configuration will be applied in installer after the device is disconnected (its
ifcfg file is removed) and reactivated (an
ifcfg file is copied back to its location with
ONBOOT=yes set). So configuration of active device for installer environment can be changed this way:
mv /etc/sysconfig/network-scripts/ifcfg-eth0 /tmp vi /tmp/ifcfg-eth0 mv /tmp/ifcfg-eth0 /etc/sysconfig/network-scripts
In F16 (where a NM bug was fixed) just editing the ifcfg file (instead of removing an copying/creating) should do the trick.
We should consider adding nmcli to install image.
At the end of the installation,
ifcfg files are copied to target system tree to directory
Selection of device to be enabled in installer
This is behaviour in rhel6-branch which should go into rawhide soon (but probably not into F15):
- Automatic use of device configured in iBFT and having active link.
network --deviceoption. For the first
networkcommand defaults to
ksdeviceboot option, device used to fetch kickstart, or prompt in loder UI (how about detected iBFT device with link?). If there are
wpakeyspecified, wireless device will be used. For next
--deviceoption is mandatory (will be enabled only with
- Dialog in loader UI if none of above applies.
Passing SSID and WEP key with boot parameters or kickstart is supported in Fedora 14. Other methods of authentication can be set in GUI using nm-c-e, although there are some issues with AP selection which could be solved with integration of NetworkManager Applet or its substitute.
Vrata Podzimek is working on WPA support for kickstart and boot options (wireless activation in loader). Patches are on a-d-l and should go to F16.
gatewayoption is common for ipv4 and ipv6 in boot options, kickstart, and loader UI. The problem is that it allows (unlike nameserver/dns) only one value (bug 562538). I think adding
gateway6to ks/boot options is a way to go, rather than allowing both values in existing
IPV4_FAILURE_FATAL=yesby default so ipv4 failing and ipv6 configuration succeeding is considered as failing overall (bug 633815). Well, I think this is OK, ipv4 can be turned out explicitly in boot options, kickstart, or UI. We don't want to pass over ipv4 configuration fail silently. Watch PATCH ifcfg-rh: Enable IPv6 by default and make IPv4 optional
- IPv6 accessibility of Fedora repository mirrors. From what I know it should be working. I don't have access to outer ipv6 world so I can't even try it myself.
- Network installation on IPv6-only networks
We'd like to let NM do the most of the job where possible. We have to bear in mind minimal installs without NM.
Written by anaconda.
- HOSTNAME set by user
- GATEWAY based on GATEWAY setting from ifcfg files (honoring DEFROUTE=no)
- IPV6_DEFAULTGW based on IPV6_DEFAULTGW setting from ifcfg files
NetworkManager can update it with HOSTNAME with SaveHostname method.
Basic files are written by anaconda in loader, updated in loader if activating device, updated in stage2 if configuring device in ks, updated with nm-c-e in GUI. For wireless the * should be replaced with SSID, not device name.
Created by NM when configuring wireless, copied to target system.
NM merges it into its dhclient file. Anaconda writes only vendor-class-identifier option based on
network --dhcpclass kickstart setting. Used to write also
network --bootproto=dhcp --hostname=<HOSTNAME>, but it is handled by NM and DHCP_HOSTNAME written by anaconda into ifcfg file. Should we copy the file on target system? Probably yes - bug 476364. Yes, we set dhcp timeout for NM in the file (from dhcptimeout boot option).
Anaconda doesn't touch it. AFAIK, NetworkManager updates it based on
host-name dhcp option (for assigned IP and 127.0.0.1).
Anaconda doesn't touch it, it is generated by NetworkManager.
Anaconda copies the file generated by udev to target system. It is possible that we shouldn't do it as we don't change it and the file is generated on boot by udev anyway (bug 652499).
Bugs and issues
DVD install and ONBOOT
DVD install defaults to ONBOOT=no leaving networking down after reboot - bug 498207. This is rather sore issue. Only devices enabled during install will have set ONBOOT=yes by default. For other devices, the setting has to be configured. Default was changed in F16 - for non-ks installs if network was not enabled during install set ONBOOT=yes for first (non-wireless) device with link detected.
This differs from RHEL 5 where a device is preconfigured to be activated automatically in network screen. This network configuration screen has been replaced by nm-c-e in RHEL 6 in par with transition to NetworkManager. Without the screen we have no easy option to make user acknowledge/confirm the default by going to next screen, so imposing the default is more debatable. Also, checking "Connect Automatically" in nm-c-e has a side-effect of activating the device (unlike the corresponding choice in rhel 5 network configuration screen)
Missing GUI pieces
Fedora feature: Anaconda/Features/NetworkReconfiguration
Missing functionality that NetworkManager Applet or, since F15 control center offers:
- device activation/disconnection (to apply reconfiguration)
- networking status information
- selection of wireless access point
- wireless authentication dialogs (can be done in nm-c-e, but it is not intuitive)
- and access to device configuration at any time
Currently it can be worked around only by editing configuration files.
- Wrong static configuration (e.g. wrong nameserver). The device is considered as active (networking enabled) and user doesn't get chance to fix configuration in the point of fail (adding network storage, network repositories).
- Adding configuration of another device, e.g. for iSCSI target on separate subnet. This won't deal with iBFT though, see bug 710366.
Places in the GUI where access to network (re-)configuration (regardless of whether the network is enabled or not) would be useful.
- Standard step (the hostname screen) with optional network configuration. It is the only opportunity currently.
- Advanced storage screen.
- Repository UI screen. Note that this wouldn't help in case of edit of failing base repository which happens in dialog before repository UI screen step (tasksel step) so successful enablement of network with wrong static values (e.g. dns) is fatal here. I attempted to reorganize repository UI to deal with it ..
- Before reboot to give chance to automatically activate a device after reboot, see this issue.
I was exploring various approaches:
- our own UI - it has some functional limits an was kind of first draft with UI to be polised. This is not a way to go, I don't want to duplicate and maintain the code.
- Integration of NetworkManager Applet was refused due to UX concerns at FudCON in Tempe by the team, as it requires integreation of panel into installer UI which was regarded as confusing. I must say that I don't share the UX remarks, on the contrary I see it as logic and expectable place for permanent access to network configuration (which is right thing IMO)..
- Integration of gnome-control-center that appeared in F15. Here is a draft screencast:
There are some issues I came accross (see http://rvykydal.fedorapeople.org/anaconda-gnome-control-center-network.png for reference)
1) Add single-panel mode option to g-c-c where [All Settings] button is removed, making only network configuration accessible.
2) Add device description to g-c-c panel, see there is only 'Wired' and MAC address currently.
3) Add window decoration button ([X]) to be able to close the window/app.
4) nm-applet is needed to provide user secrets agent service, though the applet itself will not be exposed anywhere in anaconda UI - it will only provide dialogs for authentication etc.. We need to open a session in ConsoleKit for anaconda (and pull ConsoleKit into the image). In master, running ConsoleKit service kills NetworkManager, seems to hit https://bugzilla.redhat.com/show_bug.cgi?id=703734.
5) [Options] button is sensitive only if the device is active while we want to configure also other devices in anaconda, see https://bugzilla.redhat.com/show_bug.cgi?id=704119#c2
6) Size of the image - something to be explored yet. In my initial tests I added control-center package, nm-applet (negligible), commented out removal of some files from ConsoleKit package (required by nm-applet). This made change of about 8-9 MB, but there are definitely opportunities to make it better (painfully).
- Seems that I'll have to wait for new UX design.
That is, without NetworkManager.
- to have working default ifcfg file for network service
BOOTPROTOis required - unlike for NM. Bugs 636526, 705718, 741199. This should be fixed in F16.
networkservice is off by default - it's business of
systemd. Bug 702261, 745518.
Back and Retry in loader in poor state
- [Back] in loader UI, Manual TCP/IP Configuration screen, doesn't work in F15. It does on rhel6-branch so I guess it got screwed up in master by some other patch since I had fixed it (commit ec146852176e2b41ace7725ed8eda337842d3160).
- review [Retry] after failing enablement in loader
- Now works only in STEP_NETWORK, might want to add it also for early networking and getting ks/updates.
Given we are aiming to get rid of loader and the state of loader UI steps code (complicated, fragile, incomprehensible setting of flags) I am leaving it as it is.
- Multiple NICs: Routing and interface binding (bug 500273, bug 737794) issues. For storage target and ks/repositories on separate subnets: 638131, bug 710366.
- Interface binding. First stage: all nodes bound or default. Next stage: extend libiscsi, per-node choice - default as one of interfaces to choose from (do we even want this?).
- Inintscripts in dracut vs. enabled NetworkManager service:
- multiple network devices activation: one for iSCSI, second for repo
- can be done using
network --activatecommand or in GUI with
nm-c-e(which lacks support for iBFT configuration though). You have to check Connect Automatically to activate the device.
- automatic activation of another device for repos? bug 767086
- checks for network presence based not on device state but on connectivity check, NM patch: http://mail.gnome.org/archives/networkmanager-list/2011-October/msg00225.html
- can be done using
- iBFT autoconfiguration
- for rhel 5: bz comment
- Consistent Network Device Naming - aka biosdevname - get rid of
DEVICE? NM is not ready for it (690589).
- allow single Return to accept DHCP net config on stage1 network page - 648357 - newt hacking, I can't figure it out, doubt if it is possible at all, having the buttons in a grid
- Anaconda reports "Network error" despite DHCP being successfully configured - 669019 - dhcp timeout - depends on NetworkManager bug 663820
- VNC install: -nevershared passed to Xvnc results in inability to control install 628477 - I don't know why it is there.
- Special option (ui, kickstart, cmdline) for IPv6 gateway bug 715574
noipv6probably don't work correctly for more devices activated with different settings in some cases because loader is using global flags for it. We should use IPV4_UNUSED_METHOD in loaderData->ipv4method or reset the flags when processing ks at least (master, rhel6-branch).
- Support for stateless dhcp6 in loader UI - should happen in
nm-c-efirst as we provide only subset of it (bug 656335 WONTFIX)
- ifcfg files and LiveCD? Check that we copy them, also there is an issue with hostname setting for XFCE spin
- consider for rhel6-branch
- Documentation update:
- Fedora - TODO: update Installation Guide (see rhel installation guide update in https://bugzilla.redhat.com/show_bug.cgi?id=679104, --activate stuff and multiple device activation in ks is in F16)
- hostname setting
- NM sets hostname when bringing up device (as part of policy)
- ifcfg-rh updates
/etc/sysconfig/networkbut it seems that it just writes out a new one with
- new in NM 9.0: org.freedesktop.NetworkManager.Settings.SaveHostname(), hostname property
- DHCP_HOSTNAME (makes client send host-name option to dhcp server) is set in ifcfg file for "
network --bootproto=dhcp --hostname=<HOSTNAME>". Relevant NM bugs: bug 596242, bug 488975.
Anaconda UX redesign
- UI pieces design: look for network in Anaconda/Work_List
- spoke type and location
- NormalSpoke off hub #1
- StandaloneSpoke before hub #1, when present?
- depending on whether network had been autoenabled
- depending on install type (e.g. DVD)
- Shortcuts from relevant spokes like sw source, network storage? Not sure if doable neatly in the framework.
- add nm-applet to installer image
- proxy configuration:
- In loader: proxy is passed to curl to get kickstart, stage2, updates.img, ...
- For repositories: it is passed to yum. Should be set in software source spoke per-repo. Plus global setting for all repos? Where should it be placed? I see it in software source spoke too. (bug 753953)
- As global environment setting: In installer this could serve as global setting for all repos. Another request: environment variable for %post (e.g. when using wget there)? For system configuration it doesn't seem to make sense doing it in installer (neither via GSetting org.gnome.system.proxy nor via http_proxy env variable). See also bug 788537.
- Devices configuration (ksdata <-> ifcfg files) - we have these options:
- Writing ifcfg files directly - this is what we do now. For ibft (BOOTPROTO=ibft) this is the only option as the config is read from ibft by ifcfg-rh plugin.
- Using dbus interface - we do wireless configuration this way, we let NM write ifcfg files and keys configuration files.
- Using glib interface - NM has gobject introspection support and NM glib API seems more convenient and has quite a lot of useful utility functions.
Newui networking TODO, notes, questions
- Hostname setting
- To be designed - where to place it ? Storage is using hostname for default names of LVM volume groups. RAID members used to be named using it by mdadm, but it seems not to happen currently. So we need hostname set before storage is configured (or can drop default naming using hostname). Also some packages may require hostname to be set during installation?
- Some details here: https://lists.fedorahosted.org/pipermail/anaconda-patches/2012-July/000286.html.
- systemd hostnamed service - use dbus to set it? how does it get along with NM?, write out /etc/hostname?
- Stacking of windows of nm-c-e (GUI apps we run from anaconda). Patch pending (https://www.redhat.com/archives/anaconda-devel-list/2012-June/msg00408.html).
- removing Alt-Tab functionality made recovery from losing window below spoke impossible or hard
- Wireless support
- Need to test it.
- Need to implement kickstart support in anaconda.
- We are losing boot opts/loader support (e.g. for getting ks via wireless). essid, wepkey, wpakey boot options.
- Wireless authentication. We need SecretsAgent dbus service. Desktop is using nm-applet. We can:
- Use it too. That means adding it to image. We'll need to handle its window stacking somehow - similar problem as with nm-c-e.
- Write our own - we might need it for #5 of https://www.redhat.com/archives/anaconda-devel-list/2012-July/msg00026.html, although we may do only with AP selection UI and use nm-applet still, but again - windows stacking problem.
- Network storage configuration
- configuration (ifcfg files) modifications by anaconda is needed at the end of installation
- root on iSCSI: NM_CONTROLLED=no (there is NM bug open to fix it) - this might get fixed finally - seeing some progress in https://bugzilla.redhat.com/show_bug.cgi?id=607921
- FCoE: set ONBOOT=yes
- BOOTPROTO=ibft is done by ifcfg-rh, not in NM api! This may limit us in anaconda.
- Perhaps think about shortcut to network configuration (I'd rather not push UI flow this way).
- configuration (ifcfg files) modifications by anaconda is needed at the end of installation
- Missing ifcfg files -> NM activates auto connections. But we need ifcfg files.
- Patch for creating default ifcfg files in dracut pending/discussed: https://www.redhat.com/archives/anaconda-devel-list/2012-July/msg00065.html, https://lists.fedorahosted.org/pipermail/anaconda-patches/2012-July/000105.html
- Where to write kickstart configuration ?
- Now in dracut, we can profit from using ONBOOT=yes for --activate, though it will need some resetting of ONBOOT in anaconda.
- ONBOOT policy - has to be set by anaconda.
- some details and notes here: https://www.redhat.com/archives/anaconda-devel-list/2012-July/msg00065.html
- --activate and --onboot options
- depends on default policy
- technical constraints (ONBOOT=yes makes NM activate device in some cases)
- ifcfg files <-> ksdata mapping
- just copy ifcfg files created by nm-c-e or go through ksdata? Details: http://git.fedorahosted.org/cgit/anaconda.git/commit/?id=e2307897400700b10d60b0a80e7b15ef7d6f1772
- Copy routing configuration (from nm-c-e) to system.
- This might become required by some multi NICs setups (e.g. for iSCSI/multipath).
- Support of new features in rhel 6. They are using NM ifcfg configuration which may require creating of ifcfg files before NM (and therefore anaconda) is run. Will we end up needing a post-dracut, pre-NM service? Or should/can be implemented in dracut? Dracut has support for bonding and vlan boot options, how about kickstart? And taking over by NM?
- vlan support
- bonding support
- IBoIP (infiniband) (TYPE=InfiniBand in ifcfg file)
- Support for some rhel 6 features (they were backported to rhel 6 from rhel 5)?
- Minor cleanups
- utility code placed in isys.py and network.py
- NM's autoconnections
- Are run if ifcfg file is missing (dracut doesn't create default ifcfg files atm, anaconda does, see above)
- They don't write out corresponding ifcfg files.
- Anaconda is using ifcfg files as interface to NM.
- Network status change out of network spoke (cable plug in/out, tty shell...) and update of hub status information (https://bugzilla.redhat.com/show_bug.cgi?id=854159)