Architectures/ARM/AArch64/QuickStart

From FedoraProject

< Architectures | ARM | AArch64(Difference between revisions)
Jump to: navigation, search
(Using the Model with an Image)
(Using the Model with an Image)
Line 26: Line 26:
 
Using the commands below, download and extract the Aarch64 root filesystem disk image. The disk image will extract to roughly 8GB in size and may take several minutes to unpack depending on your hardware.
 
Using the commands below, download and extract the Aarch64 root filesystem disk image. The disk image will extract to roughly 8GB in size and may take several minutes to unpack depending on your hardware.
 
  cd ~/aarch64
 
  cd ~/aarch64
  wget http://fedorapeople.org/~pwhalen/aarch64/stage4-root-20130423.img.tar.bz2
+
  wget http://fedorapeople.org/~pwhalen/aarch64/stage4-root-20130528.img.tar.bz2
  tar xvjf stage4-root-20130423.img.tar.bz2
+
  tar xvjf stage4-root-20130528.img.tar.bz2
  
Download and extract the kernel package:
+
==== Kernel Packages ====
wget http://fedorapeople.org/~pwhalen/aarch64/aarch64-kernels.tar.bz2
+
The Foundation model seems to have some performance issues when using a serial console, there are two kernel packages to choose from - one that includes the console, the other does not and is intended for use by connecting through ssh.
tar xvjf aarch64-kernels.tar.bz2
+
* With console:
 +
<pre>
 +
wget http://fedorapeople.org/~pwhalen/aarch64/systemd-3.9-image-2G.tar.bz2
 +
tar xvjf systemd-3.9-image-2G.tar.bz2
 +
</pre>
 +
* No console:
 +
<pre>
 +
wget http://fedorapeople.org/~pwhalen/aarch64/systemd-3.9-image-ns-2G.tar.bz2
 +
tar xvjf systemd-3.9-image-ns-2G.tar.bz2
 +
</pre>
 +
 
 +
===== Starting the Model ======
 +
 
 +
* With console:
 +
 
 +
* No console:
  
The model can now be launched using the disk image as the root filesystem with the commands below:
 
Systemd:
 
sudo Foundation_v8pkg/Foundation_v8 --image aarch64-kernels/systemd-3.7-image-foundation.axf --block-device stage4-root-20130423.img --network=bridged
 
Busybox:
 
sudo Foundation_v8pkg/Foundation_v8 --image aarch64-kernels/busybox-3.7-image-foundation.axf --block-device stage4-root-20130423.img --network=bridged
 
  
 
The model will take a few moments to start. The '''root password is 'fedora', there is also another account called 'builder' password 'builder''''.
 
The model will take a few moments to start. The '''root password is 'fedora', there is also another account called 'builder' password 'builder''''.

Revision as of 15:01, 29 May 2013

Shortcut:
Arch:ARM

Contents

Aarch64 Quickstart Guide

This page will help those new to aarch64(armv8) get started with the Foundation Model provided by ARM. There are a number of options available when using the model, including use of a disk image file or NFS root filesystem, as well as a choice of kernel if you would like to use Systemd or Busybox as the init process.

Download the Foundation Model

The first step will be to download the Foundation model from ARM. The model is not redistributable and will therefor require you to create a free account with ARM. Once completed you will be able to download the Foundation Model and begin.

To run the model you may need to install some additional software with the following command:

sudo yum install xterm xorg-x11-fonts-{misc,100dpi,75dpi}* telnet bridge-utils

Extract the Foundation Model

Once you have downloaded the model, you will need to set up your environment. The model can extracted to a path of your choosing, in this example we will use your home directory. Unpack the model:

mkdir ~/aarch64
cd ~/aarch64
tar xvzf FM000-KT-00035-r0p8-44rel23.tgz

Using the Model with an Image

Using the commands below, download and extract the Aarch64 root filesystem disk image. The disk image will extract to roughly 8GB in size and may take several minutes to unpack depending on your hardware.

cd ~/aarch64
wget http://fedorapeople.org/~pwhalen/aarch64/stage4-root-20130528.img.tar.bz2
tar xvjf stage4-root-20130528.img.tar.bz2

Kernel Packages

The Foundation model seems to have some performance issues when using a serial console, there are two kernel packages to choose from - one that includes the console, the other does not and is intended for use by connecting through ssh.

  • With console:
wget http://fedorapeople.org/~pwhalen/aarch64/systemd-3.9-image-2G.tar.bz2
tar xvjf systemd-3.9-image-2G.tar.bz2
  • No console:
wget http://fedorapeople.org/~pwhalen/aarch64/systemd-3.9-image-ns-2G.tar.bz2
tar xvjf systemd-3.9-image-ns-2G.tar.bz2
Starting the Model =
  • With console:
  • No console:


The model will take a few moments to start. The root password is 'fedora', there is also another account called 'builder' password 'builder'.

Network Configuration

After launching the model, sign in using the root account for the network to be auto-configured.

On the host system:

sudo ifconfig ARM0 10.0.0.1 netmask 255.255.255.0

Using the model with an NFS root

Using the model through an NFS is recommended as it will allow the most flexibility when working with the system. It is important to use the paths provided as the kernel will expect the root file system to be mounted through NFS from the given path.

Setting up an NFS Root Filesystem

First you will need to create a directory for the root filesystem. It is important you use the same path in the example as the kernel expects the rootfs to be at the path used below (extracting may take several minutes depending on your hardware):

sudo mkdir -p /var/exports/aarch64/stage4-nfs-root
cd /var/exports/aarch64/
sudo wget http://fedorapeople.org/~pwhalen/aarch64/stage4-root-20130423.tar.xz
cd stage4-nfs-root
sudo tar xvJf ../stage4-root-20130423.tar.xz
sudo mv stage4-root-20130423/* .
sudo mv stage4-root-20130423/.profile .
sudo rm -rf stage4-root-20130423
  • Now create an NFS share for the rootfs, edit /etc/exports
sudo vi /etc/exports
/var/exports/aarch64/stage4-nfs-root *(rw,no_root_squash,no_all_squash,async)
  • Start the service
sudo systemctl start nfs.service  # Fedora
service nfs start   # RHEL

Booting the Model with an NFS root

You need to setup the network for use with the aarch64 model and the addressing used in the kernel arguments. Start the model using one of the following depending on if you would like to use systemd or busybox as your init process (Busybox is currently recommended).

  • Systemd:
sudo Foundation_v8pkg/Foundation_v8 --image aarch64-kernels/systemd-3.7-nfs-foundation.axf --network=bridged
  • Busybox:
sudo Foundation_v8pkg/Foundation_v8 --image aarch64-kernels/busybox-3.7-nfs-foundation.axf --network=bridged

After starting the model you will see a new device created on your host system named 'ARM0', use the following to assign an IP address for use with the model:

sudo ifconfig ARM0 10.0.0.1 netmask 255.255.255.0

Once this adapter is assigned an IP address, the system should boot to either a login prompt or boot with busybox as the init process.

You may need to adjust your firewall to allow connections to the NFS server (Port 2049).


Allowing the Model to Connect to the Internet

On the host:

  • Enable IP forwarding (as root)
echo 1 > /proc/sys/net/ipv4/ip_forward
  • Set up Network Address Translation:
HOSTEXTERNAL=eth0 # Replace this with your outside interface
sudo iptables -t nat -A POSTROUTING -o $HOSTEXTERNAL -j MASQUERADE
sudo iptables -A FORWARD -i $HOSTEXTERNAL -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
sudo iptables -A FORWARD -i ARM0 -o $HOSTEXTERNAL -j ACCEPT
  • Firewall trouble? Try this:
sudo iptables -A INPUT -i ARM0 -j ACCEPT

The model uses Google's Public DNS server (8.8.8.8) for name resolution (/etc/resolv.conf).

Getting Started with the Aarch64 Bootstrap

Consider setting the date to something more current. The following command, run as root, will set the date to April 19 2000 hours, 2013:

date 041920002013

Log in using the root account (using the Busybox kernel this will be done by default)

su - builder

Then execute the script:

/usr/sbin/arm-rebuild.sh

The system should begin building packages for the aarch64 bootstrap, below is an example of the output you should see:

[builder@aarch64 ~]$ /usr/sbin/arm-rebuild.sh
building: bouncycastle-1.46-7.fc19 at Thu Apr 25 22:43:27 GMT 2013
INFO: mock.py version 1.1.30 starting...
Start: init plugins
INFO: selinux disabled
Finish: init plugins
Start: run
INFO: Start(/home/builder/bouncycastle-1.46-7.fc19.src.rpm)  Config(stage4-aarch64)
Start: lock buildroot
Start: clean chroot
Finish: clean chroot
Finish: lock buildroot
Start: chroot init
Start: lock buildroot
Mock Version: 1.1.30
INFO: Mock Version: 1.1.30
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled yum cache
Start: cleaning yum metadata
Finish: cleaning yum metadata
INFO: enabled ccache
Start: device setup
Finish: device setup
Start: yum update

Known Issues