From Fedora Project Wiki
No edit summary
(44 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= Fedora s390x =
= Fedora s390x =


* IRC: #fedora-s390x on irc.freenode.net
* IRC: {{fpchat|#fedora-s390x}} on freenode.net
* Mailing List: [https://admin.fedoraproject.org/mailman/listinfo/s390x s390x]
* Mailing List: {{fplist|s390x}}
* Regular IRC meetings: TBD
* Regular IRC meetings: TBD


== Targets ==
== Targets ==
* short term goals:
=== short term goals ===
* '''prepare and release F-18 alpha for System z
 
=== long term goals ===
* reach out to known interested parties in community
* reach out to known interested parties in community
* '''have several "interested parties" that will help with development and testing once we are building packages/trees'''
* reaching out (through contacts) to IBM community (.de)
* reaching out (through contacts) to IBM community (.de)
* '''have several "interested parties" that will help once we are building packages/trees'''
* provide development trees for testing
* start F-14 composes
* release next Fedora versions shortly after the primary archs
* identify the resources used for composes
* '''get to the point where F-14 is bootable and installable with pungi images'''


== Accomplished ==
== Accomplished ==
* set up externally/publically available koji instance
* set up externally/publicly available koji instance
* [http://s390.koji.fedoraproject.org/koji/ s390x koji instance]
* [http://s390.koji.fedoraproject.org/koji/ s390x koji instance]
* Mass rebuild of all Rawhide packages, ~1000 failures
* release of F-14 for System z
* Build [http://fedora.danny.cz/s390/rebuild/koji-compare.txt statistics] updated weekly
* release of F-15 for System z (published 2011/07/27)
* release of F-16 for System z (published 2011/12/22)
* release of F-17 for System z (published 2012/06/29)
* Build [http://fedora.danny.cz/s390/rebuild/koji-compare-dist-f16.txt statistics] updated weekly


== People ==
== People ==


* '''[[User:karsten|Karsten Hopp]]''' Secondary Arch Maintainer (nickname '''Kick_''' in #fedora-s390x on IRC)
* '''[[User:karsten|Karsten Hopp]]''' Secondary Arch Maintainer (nickname '''Kick_''' in {{fpchat|#fedora-s390x}} on IRC)
* BrockOrgan
* BrockOrgan
* Brad Hinson
* Brad Hinson
* Justin Payne (nickname '''kurgan''' in #fedora-s390x on IRC)
* Justin Payne (nickname '''kurgan''' in {{fpchat|#fedora-s390x}} on IRC)
* [[User:sharkcz|Dan Horák]]
* '''[[User:sharkcz|Dan Horák]]'''
* [[User:pknirsch|Phil Knirsch]]
* [[User:pknirsch|Phil Knirsch]]
* [[User:dcantrel|David Cantrell]] (interest in anaconda support for s390)
* [[User:dcantrel|David Cantrell]] (interest in anaconda support for s390)
* [[User:sbueno|Samantha N. Bueno]]


== History ==
== History ==
Line 46: Line 52:
* README
* README
** Very brief howto get everything up and running, either for running preinstalled hercules images or how to do a complete install yourself
** Very brief howto get everything up and running, either for running preinstalled hercules images or how to do a complete install yourself
* fedora-14-s390x.img.bz2
* fedora-14-s390x.img
** Hercules Fedora 14 s390x DASD image bzip2 compressed
** Hercules Fedora 14 s390x compressed DASD image..
* f11-s390x.img
** Hercules Fedora 11 s390x DASD image
* f11-s390x.tar.bz2
** tarball of the whole tree. Can be unpacked on a real machine (confirmed it works!)
* anaconda-ks.cfg  
* anaconda-ks.cfg  
** Sample kickstart file that installs a very basic system on a dasd image. WARNING! Wipes out the whole partition table, so use with care
** Sample kickstart file that installs a very basic system on a dasd image. WARNING! Wipes out the whole partition table, so use with care
Line 60: Line 62:
* generic.prm
* generic.prm
** Kernel command line parameter file, needed for installation
** Kernel command line parameter file, needed for installation
* older files
** fedora-14-s390x.img.bz2
*** Hercules Fedora 14 s390x DASD image, bz2 compressed. Needs to be unpacked before it can be used. Beware that the uncompressed size is ~8Gb !
** f11-s390x.img
*** Hercules Fedora 11 s390x DASD image
** f11-s390x.tar.bz2
*** tarball of the whole tree. Can be unpacked on a real machine (confirmed it works!)


== Supported hardware ==
== Supported hardware ==
* [http://www-03.ibm.com/systems/z/?cm_re=masthead-_-products-_-sys-zseries IBM system Z] models z9 or newer
* [http://www-03.ibm.com/systems/z/ IBM system Z] models z9 or newer('''64-bit''').
* [http://www.hercules-390.org/ Hercules] emulator version 3.07 or SVN revision >= 6605
* [http://www.hercules-390.eu/ Hercules] emulator version 3.07 or SVN revision >= 6605
 
== Releases Notes ==
 
* [[Architectures/s390x/18|Fedora 18]]
* [[Architectures/s390x/17|Fedora 17]]
* [[Architectures/s390x/16|Fedora 16]]
* [[Architectures/s390x/15|Fedora 15]]


== Tips ==
== Tips ==
* [http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/pt-install-info-s390.html IBM System z part] of [http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/index.html RHEL 6 Installation Guide]
* General [http://www2.marist.edu/htbin/wlvindex?LINUX-390 Linux-s390] mailing list
* [http://en.wikipedia.org/wiki/Linux_on_zSeries Linux on zSeries], at wikipedia.org
== Known runtime issues ==
* After installation the yum repo doesn't point at our mash tree. Simply do the following to fix that:
<pre>
echo '[fedora]
name=Fedora $releasever - $basearch
baseurl=http://s390.koji.fedoraproject.org/mash/rawhide/s390x/os/
enabled=1
gpgcheck=0' > /etc/yum.repos.d/fedora.repo
</pre>
* If you've selected to do a minimal installation your system will boot up with no network enabled.
This happens because Networkmanager isn't included in a minimal install.
To fix this, log on as root on the console and run
<pre>
chkconfig network on
service network start
</pre>
== [[Architectures/BuildIssues|Known build issues]] ==


== Notes for application developers and package maintainers ==
== Notes for application developers and package maintainers ==
* some hardware that's usual on other platforms is missing, like
* some hardware that's usual on other platforms is missing, like
** USB
** USB - starting F-15 we have libusb1/libusb built to resolve some dependency issues, but it's a no-op, still no real USB on the mainframe :-)
** FireWire
** FireWire
** InfiniBand
** InfiniBand


* memory ordering is [http://en.wikipedia.org/wiki/Big_Endian big-endian]
* memory ordering is [http://en.wikipedia.org/wiki/Big_Endian big-endian] and wrong typecasting between pointers to integers of different size can cause fatal errors


== Please make sure to build into the correct target, don't mix dist-f14 and dist-f14-updates ==
* char is unsigned by default, some [http://www.arm.linux.org.uk/docs/faqs/signedchar.php FAQ]
 
* size_t is alias for unsigned long on s390, so the assumption size_t == unsigned int fails here, seen in C++ code using templates
 
* s390 ([http://en.wikipedia.org/wiki/31-bit 31-bit]) arch has 2 GB address space and it can be too small when building large C++ applications with debug information enabled, such builds can fail in the final link with errors like "Final link failed: exhausted memory" => the workaround is to disable debug information (remove -g from CXXFLAGS)
 
* Mono 2.8+ drops support for s390 ([http://en.wikipedia.org/wiki/31-bit 31-bit])
 
* valgrind is available on s390x since F-15
 
* stack larger than the default 8 MB is required to build pcre 8.11 (a test crashes with SIGSEGV, but no apparent reason)
 
* some programming languages are missing, like Objective Caml (ocaml), Haskell (ghc), ...
 
* xmlto needs w3m to fullfil the dependency on text-www-browser instead of lynx, otherwise it fails on empty file (seen in libXest, libSM, libXtst)
 
* sometimes wrong package is selected to fulfill a BuildRequires when multiple packages provide the name
 
* the qmake tool (part of QT) thinks s390x and ppc64 are of "linux-g++-64" type while x86_64 is "linux-g++" type
 
== Please make sure to build into the correct target, don't mix dist-f{{FedoraVersion}} and dist-f{{FedoraVersion}}-updates ==


To test a build for your specific package for s390x do this:
To test a build for your specific package for s390x do this:
Line 81: Line 142:
After running <code>fedora-packager-setup</code> from the <code>fedora-packager</code> rpm
After running <code>fedora-packager-setup</code> from the <code>fedora-packager</code> rpm


<code>s390-koji build --scratch dist-f14 yourpkg.src.rpm</code>
* <code>s390-koji build --scratch dist-f{{FedoraVersion}} yourpkg.src.rpm</code>


To build a package which should end up in the F-14 tree, the package needs to be commited in dist-git and then be built with:
To build a package which should end up in the F-{{FedoraVersion}} tree, the package needs to be commited in dist-git and then be built with:


<code>s390-koji build dist-f14 "$(fedpkg giturl)"</code>
* <code>s390-koji build dist-f{{FedoraVersion}} "$(fedpkg giturl)"</code>


== Tracker Bugs ==
== Tracker Bugs ==
Line 103: Line 164:
Packages to be submitted:
Packages to be submitted:


none
* zfcphbaapi - now a subpackage of s390utils, but own package will serve better


[[Category:Arch-specific SIGs]][[Category:SIGs]]
[[Category:Arch-specific SIGs]][[Category:SIGs]]
[[Category:Fedora special-interest groups|s390x]]
[[Category:Fedora special-interest groups|s390x]]

Revision as of 04:02, 24 January 2013

Fedora s390x

Targets

short term goals

  • prepare and release F-18 alpha for System z

long term goals

  • reach out to known interested parties in community
  • have several "interested parties" that will help with development and testing once we are building packages/trees
  • reaching out (through contacts) to IBM community (.de)
  • provide development trees for testing
  • release next Fedora versions shortly after the primary archs

Accomplished

  • set up externally/publicly available koji instance
  • s390x koji instance
  • release of F-14 for System z
  • release of F-15 for System z (published 2011/07/27)
  • release of F-16 for System z (published 2011/12/22)
  • release of F-17 for System z (published 2012/06/29)
  • Build statistics updated weekly

People

History

FUDcon 2008 was an excellent event. During the conference, a session on secondary arches was presented and there was an excellent effort made to reach out to new arches.

After several months of bootstrapping as of June 2009 we've reached a state where we have most packages built from current Fedora rawhide CVS. There are still around ~500 failures, most of which are related to java and ocaml dependencies (ocaml is not available on s390x).

News of September 2010: We're now getting really close to Rawhide and we have a working install tree available thats basically based on current Fedora 14. Previously we only provided a hercules images as well as a tarball from a root FS as installs weren't possible. We still provide those, but now you can do your own installs again, too!

For those interested in trying it out you access everything needed from here:

http://secondary.fedoraproject.org/pub/alt/spins/S390/

You will find several files there:

  • README
    • Very brief howto get everything up and running, either for running preinstalled hercules images or how to do a complete install yourself
  • fedora-14-s390x.img
    • Hercules Fedora 14 s390x compressed DASD image..
  • anaconda-ks.cfg
    • Sample kickstart file that installs a very basic system on a dasd image. WARNING! Wipes out the whole partition table, so use with care
  • hercules.cnf
    • hercules emulator config file
  • hercules.init
    • Small script to start up hercules with some iptables rules for NAT (might require you to modify your personal rules in order to work properly)
  • generic.prm
    • Kernel command line parameter file, needed for installation
  • older files
    • fedora-14-s390x.img.bz2
      • Hercules Fedora 14 s390x DASD image, bz2 compressed. Needs to be unpacked before it can be used. Beware that the uncompressed size is ~8Gb !
    • f11-s390x.img
      • Hercules Fedora 11 s390x DASD image
    • f11-s390x.tar.bz2
      • tarball of the whole tree. Can be unpacked on a real machine (confirmed it works!)

Supported hardware

Releases Notes

Tips

Known runtime issues

  • After installation the yum repo doesn't point at our mash tree. Simply do the following to fix that:
echo '[fedora]
name=Fedora $releasever - $basearch
baseurl=http://s390.koji.fedoraproject.org/mash/rawhide/s390x/os/
enabled=1
gpgcheck=0' > /etc/yum.repos.d/fedora.repo
  • If you've selected to do a minimal installation your system will boot up with no network enabled.

This happens because Networkmanager isn't included in a minimal install. To fix this, log on as root on the console and run

chkconfig network on
service network start

Known build issues

Notes for application developers and package maintainers

  • some hardware that's usual on other platforms is missing, like
    • USB - starting F-15 we have libusb1/libusb built to resolve some dependency issues, but it's a no-op, still no real USB on the mainframe :-)
    • FireWire
    • InfiniBand
  • memory ordering is big-endian and wrong typecasting between pointers to integers of different size can cause fatal errors
  • char is unsigned by default, some FAQ
  • size_t is alias for unsigned long on s390, so the assumption size_t == unsigned int fails here, seen in C++ code using templates
  • s390 (31-bit) arch has 2 GB address space and it can be too small when building large C++ applications with debug information enabled, such builds can fail in the final link with errors like "Final link failed: exhausted memory" => the workaround is to disable debug information (remove -g from CXXFLAGS)
  • Mono 2.8+ drops support for s390 (31-bit)
  • valgrind is available on s390x since F-15
  • stack larger than the default 8 MB is required to build pcre 8.11 (a test crashes with SIGSEGV, but no apparent reason)
  • some programming languages are missing, like Objective Caml (ocaml), Haskell (ghc), ...
  • xmlto needs w3m to fullfil the dependency on text-www-browser instead of lynx, otherwise it fails on empty file (seen in libXest, libSM, libXtst)
  • sometimes wrong package is selected to fulfill a BuildRequires when multiple packages provide the name
  • the qmake tool (part of QT) thinks s390x and ppc64 are of "linux-g++-64" type while x86_64 is "linux-g++" type

Please make sure to build into the correct target, don't mix dist-f39 and dist-f39-updates

To test a build for your specific package for s390x do this:

After running fedora-packager-setup from the fedora-packager rpm

* s390-koji build --scratch dist-f39 yourpkg.src.rpm

To build a package which should end up in the F-39 tree, the package needs to be commited in dist-git and then be built with:

* s390-koji build dist-f39 "$(fedpkg giturl)"

Tracker Bugs

If excluding s390/s390x architectures you need to make the bug block F-ExcludeArch-s390x

to see whats currently blocking visit Bugzilla

If a bug is specific to s390/s390x architectures make the bug blocking ZedoraTracker

to see not yet resolved issues visit Bugzilla

Packages under review

List of s390 specific packages currently under review in Fedora

none

Packages to be submitted:

  • zfcphbaapi - now a subpackage of s390utils, but own package will serve better