From Fedora Project Wiki

m (→‎gEDA: changed a error I introduced (listed files as plural when it should be singular))
 
(118 intermediate revisions by 11 users not shown)
Line 1: Line 1:
Fedora 10 includes a number of applications and libraries that are of interest to amateur radio operators and electronic hobbyists.  This note outlines those applications.  Many of these applications are included in the 'Fedora Electronic Lab' spin.  Fedora also includes a number of VLSI and IC design tools which have been omitted from this list.
+
{{header|docs}}
  
 +
{{Docs_beat_closed}}
  
===Sound Card Modes===
+
[[Category:Docs Project]]
 
+
[[Category:Draft documentation]]
'''fldigi-3.01-1'''
+
[[Category:Documentation beats]]
Digital modem program for Linux
 
 
 
fldigi is a modem program which supports most of the digital modes used by amateur radio operators today. You can also use the program for calibrating your sound card to WWV or doing a frequency measurement test. The program also comes with a Morse decoder. fldigi is written with the help of the Fast Light Toolkit X GUI.
 
 
 
 
 
'''gpsk31-0.3-3'''
 
PSK31 for Linux with a GTK+ Interface
 
 
 
 
 
'''gmfsk-0.7-0.5'''
 
A Gnome multimode HF terminal for amateur radio
 
 
 
gmfsk is a terminal program for amateur radio digital communication modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and Hellschreiber modulations. gmfsk's focus is keyboard-to-keyboard chatting.
 
 
 
 
 
'''lpsk31-1.1-1'''
 
A ncurses application for amateur radio communications using PSK31 digital mode
 
 
 
lpsk31 is a ncurses console application for amateur radio communications in the popular PSK31 digital mode. lpsk31 uses only integer arithmetic for both signal detection and audio tone synthesis, so that it needs no floating point calculations for its operation. lpsk31 can keep a log of QSO's in text and ADIF format as well as a raw log of all that is typed in the transmit window or displayed in the receive window.
 
 
 
 
 
'''xfhell-1.4-4'''
 
GTK based amateur radio application for the Hellschreiber communications mode
 
 
 
xfhell is a GTK+ application for the "fuzzy" digital amateur radio communication mode known as Hellschreiber.
 
 
 
 
 
'''xpsk31-1.2-1'''
 
GTK+ graphical version of lpsk31 for amateur radio
 
 
 
xpsk31 is a GTK+ graphical version of lpsk31, using the same integer-based signal decoding and encoding engine but controlled by the user via the GUI. In addition it has a FFT-derived "waterfall" display of the incoming signal and a "magniphase" display that shows the magnitude, phase and frequency error of the psk31 signal.
 
 
 
===SDR===
 
 
 
'''gnuradio-3.1.2-2'''
 
Software Defined Radio Framework
 
 
 
GNU Radio is a collection of software that when combined with minimal hardware, allows the construction of radios where the actual waveforms transmitted and received are defined by software. What this means is that it turns the digital modulation schemes used in today's high performance wireless devices into software problems.
 
 
 
 
 
===APRS===
 
 
 
'''aprsd-2.2.5-15'''
 
Internet gateway and client access to amateur radio APRS packet data
 
 
 
APRSd is an APRS daemon that uses amateur radio and the Internet to convey weather and positional data in real-time.
 
 
 
 
 
'''xastir-1.9.2-9'''
 
Amateur Station Tracking and Reporting System
 
 
 
xastir is a graphical application that uses amateur radio and the Internet to map and report in real-time using APRS data.
 
 
 
===gEDA===
 
 
 
The gEDA suite consists of an integrated set of schematics applications for capture, net listing, circuit simulation and PCB layout.
 
 
 
 
 
'''geda-docs-20080127-1'''
 
Documentation for gEDA
 
 
 
This package contains documentation for the gEDA project.
 
 
 
 
 
'''geda-examples-20080127-2'''
 
Circuit examples for gEDA
 
 
 
This package contains circuit examples for the gEDA project.
 
 
 
 
 
'''geda-gattrib-20080127-2'''
 
Attribute editor for gEDA
 
 
 
gattrib is gEDA's attribute editor. It reads a set of schematic files and creates a spreadsheet showing all components in rows with the associated component attributes listed in the columns.
 
It allows the user to add, modify, or delete component attributes outside of gschem, and then save the schematic files. Component attribute editing is implemented while pin and attributes are read-only.
 
 
 
'''geda-gnetlist-20080127-1'''
 
Netlister for the gEDA project
 
 
 
gnetlist generates net lists from schematics drawn with gschem
 
(the gEDA schematic editor). Output formats include:
 
* native
 
* tango
 
* spice
 
* allegro
 
* PCB
 
* verilog
 
 
 
and others.
 
 
 
 
 
'''geda-gschem-20080127-2'''
 
Electronics schematics editor
 
 
 
gschem is an electronics schematic editor.
 
 
 
 
 
'''geda-gsymcheck-20080127-1'''
 
Symbol checker for electronics schematics editor
 
 
 
gsymcheck is a utility to check symbols for gschem.
 
 
 
 
 
 
 
'''geda-symbols-20080127-1'''
 
Electronic symbols for gEDA
 
 
 
This package contains symbols of electronic devices
 
used by gschem, the gEDA project schematic editor.
 
 
 
 
 
'''geda-utils-20080127-2'''
 
Several utilities for the gEDA project.
 
 
 
 
 
'''gerbv-2.0.0-1'''
 
Gerber file viewer from the gEDA toolkit
 
 
 
Gerber Viewer (gerbv) is a reader for Gerber files. Gerber files are generated from PCB CAD systems and sent to PCB manufacturers as the basis for the manufacturing. The standard supported by gerbv is RS-274X.
 
 
 
gerbv also supports drill files. The formats supported include NC-drill and Excellon. Drill file formats are not standardized.
 
 
 
 
 
 
 
 
 
'''pcb-0.20080202-2'''
 
An interactive printed circuit board editor
 
 
 
PCB is an interactive printed circuit board editor for the X window system.
 
PCB includes a rats nest feature, design rule checking, and can provide
 
industry standard RS-274-X (Gerber), NC drill, and centroid data (X-Y data)
 
output for use in the board fabrication and assembly process. PCB offers
 
high end features such as an autorouter and trace optimizer which can
 
tremendously reduce layout time.
 
 
 
===SPICE===
 
 
 
'''gspiceui-0.9.65-2'''
 
GNU Spice GUI provides a GUI to freely available
 
Spice electronic cicuit simulators such as GnuCAP and Ng-Spice.
 
It uses gNetList to convert schematic files to net list files
 
and gWave to display simulation results.
 
gSchem is used as the schematic generation/viewing tool.
 
 
 
 
 
'''ngspice-17-16'''
 
ngspice is a general-purpose circuit simulator program implementing three classes of analysis:
 
 
 
* Non-linear DC analyses
 
* Non-linear Transient analyses
 
* Linear AC analyses
 
 
 
ngspice implements the usual circuits elements, such as resistors, capacitors,
 
inductors (single or mutual), transmission lines and a growing number of
 
semiconductor devices including diodes, bipolar transistors, mosfets (both bulk
 
and SOI), mesfets, jfet and HFET.
 
 
 
ngspice integrates Xspice, a mixed-mode simulator built upon spice3c1 and can be modififed to utilize spice3f5. Xspice provides a
 
codemodel interface and an event-driven simulation algorithm. Users can develop their own models for devices using the codemodel interface. ngspice may be used for VLSI simulations as well.
 
 
 
 
 
'''gnucap-0.35-4'''
 
The Gnu Circuit Analysis Package
 
 
 
The primary component is a general purpose circuit simulator. It performs
 
non-linear DC and transient analyses, Fourier analysis, and AC analysis. Spice
 
compatible models for the MOSFET (level 1-7), BJT, and diode are included in
 
this release. Gnucap is not based on Spice, but some of the models have been
 
derived from the Berkeley models. Unlike Spice, the engine is designed to do
 
true mixed-mode simulation. Most of the code is in place for future support of
 
event driven analog simulation, and true multi-rate simulation.
 
 
 
===Others===
 
 
 
'''aldo-0.7.5-2'''
 
Aldo - Morse code learning tool
 
 
 
Aldo is a Morse code learning tool released under GPL, which provides four type of training methods:
 
 
 
* Classic exercise - Identify random characters played in Morse code.
 
* Koch method - Two Morse code characters will be played at full speed (20wpm) until you’ll be able to identify at least 90 percent of them. After that, one more character will be added, and so on.
 
* Read from file - Identify the Morse code generated from a file.
 
* Callsign exercise - Identify random callsigns played in Morse code.
 
 
 
 
 
'''ax25-apps-0.0.6-2'''
 
AX.25 Amateur Radio Applications
 
 
 
This package provides applications that use AX.25 Net/ROM or ROSE network protocols:
 
 
 
* axcall: a general purpose AX.25, NET/ROM and ROSE connection program.
 
* axlisten: a network monitor of all AX.25 traffic heard by the system.
 
* ax25ipd: an RFC1226 compliant daemon which provides encapsulation of AX.25 traffic over IP.
 
* ax25mond: retransmits data received from sockets into an AX.25 monitor socket.
 
 
 
 
 
'''colrdx-1.02-2'''
 
DX-cluster client with curses color support
 
 
 
Colrdx is a simple client for amateur radio dx-clusters. In a split-screen display you can type commands for the cluster in the bottom part. Messages from the dx-cluster will appear in the main window. There is also a status line at the top with some basic information.
 
 
 
 
 
'''dxcc-20080225-4'''
 
ARRL DXCC entity identification application
 
 
 
dxcc is a small utility which determines the ARRL DXCC entity of a amateur radio callsign, based on the cty.dat country file by Jim Reisert, AD1C.
 
dxcc has an optional GUI showing the DXCC entity location on a world map.
 
 
 
 
 
'''demorse-0.9-2'''
 
Command-line tool for decoding Morse code signals
 
 
 
demorse is a command line tool for translating Morse code signals into text. demorse detects the "dihs" and "dahs" that make a Morse code character via the computer's sound card, which can be connected to a radio receiver tuned to a Morse code transmission or to a tone generator.
 
 
 
The input signal is processed by a Goertzel tone detector which produces "mark" or "space" (signal/no signal) outputs and the resulting stream of Morse code "elements" is decoded into an ASCII character for printing to the screen. Currently demorse is a non- interactive command line tool for the console and decoded Morse signals are sent to stdout.
 
 
 
 
 
'''gpredict-0.9.0-3'''
 
Real-time satellite tracking and orbit prediction program
 
 
 
Gpredict is a real-time satellite tracking and orbit prediction
 
program written using the Gtk+ widgets. Gpredict is targeted mainly
 
towards amateur radio operators but others interested in satellite
 
tracking may find it useful as well. Gpredict uses the SGP4/SDP4
 
algorithms, which are compatible with the NORAD Keplerian elements.
 
 
 
 
 
'''gresistor-0.0.1-12'''
 
Gnome resistor color code calculator
 
 
 
To allow for identification, resistors are usually marked with
 
colored bands. Often refereed to as color codes, these markings
 
are indicative of their resistance, tolerance and temperature
 
coefficient. gResistor is a great program that will help you
 
translate a resistor color codes into a readable value.
 
 
 
 
 
'''gridloc-0.6-5'''
 
gridloc is a ncurses console application for the calculation of Maidenhead QRA Locators from location coordinates, and vice-versa.  gridloc also calculates distance and direction from a home location to another location.
 
 
 
 
 
'''grig-0.7.2-5'''
 
A amateur radio control graphical user interface
 
 
 
Grig is a graphical user interface for the amateur radio control Libraries. It is intended to be simple and generic, presenting the user to the same interface regardless of which radio he or she uses.
 
 
 
 
 
'''gtkwave-3.1.13-1'''
 
GTKWave is a waveform viewer that can view VCD files produced by most Verilog
 
simulation tools, as well as LXT files produced by certain Verilog simulation
 
tools.
 
 
 
 
 
'''hamlib-1.2.7-2'''
 
Hamlib radio control library.
 
 
 
Hamlib provides a standardised programming interface that applications can use to send the appropriate commands to a radio.
 
 
 
Also included in the package is a simple radio control program 'rigctl', which lets one control a radio transceiver or receiver, either from command line interface or in a text-oriented interactive interface.
 
 
 
 
 
'''iverilog-0.9.20080429-1'''
 
Icarus Verilog is a verilog compiler and simulator
 
 
 
Icarus Verilog is a Verilog compiler that generates a variety of
 
engineering formats, including simulation. It strives to be true
 
to the IEEE-1364 standard.
 
 
 
 
 
'''kicad-2007.07.09-4'''
 
Electronic schematic diagrams and printed circuit board artwork
 
 
 
Kicad is an open source (GPL) software package for the creation of electronic schematic
 
diagrams and printed circuit board artwork up to 16 layers.
 
Kicad is a set of four softwares and a project manager:
 
 
 
* Eeschema: schematic entry
 
* Pcbnew: board editor
 
* Gerbview: GERBER viewer (photoplotter documents)
 
* Cvpcb: footprint selector for components used in the circuit design
 
* Kicad: project manager
 
 
 
 
 
'''libax25-0.0.11-3'''
 
AX.25 library for amateur radio applications
 
 
 
libax25 is a library for amateur radio applications that use the AX.25 protocol. Included are routines to parse AX.25 adress parsing
 
 
 
 
 
'''LinLog-0.3-4'''
 
A amateur radio logbook for Linux
 
 
 
LinLogBook is a highly configurable amateur radio logbook for Linux that uses an SQL database to store its data. For the ease of use SQLite 3 is used but it should be possible to use other databases such as MySQL.
 
 
 
 
 
'''qucs-0.0.14-1'''
 
Circuit simulator
 
 
 
Qucs is a circuit simulator with graphical user interface.  The
 
software aims to support all kinds of circuit simulation types,
 
e.g. DC, AC, S-parameter and harmonic balance analysis.
 
 
 
 
 
'''tqsllib-2.0-4'''
 
Trusted QSL Library
 
 
 
tqsllib provides functions for signing amateur radio QSL data to create tQSLs. tQSLs can be uploaded to the ARRL Logbook of the World projct for credit towards amateur radio awards.
 
 
 
 
 
'''unixcw-2.3-2'''
 
Shared library for Morse programs
 
 
 
The UnixCW utilities add a general purpose Morse code library to your system, and a small set of applications based around this library.  These applications form a Morse code tutor suite, useful for Amateur and Marine radio operators.
 
 
 
 
 
'''xcircuit-3.4.28-1'''
 
Electronic circuit schematic drawing program
 
 
 
Xcircuit is a general-purpose drawing program and also a specific-purpose
 
CAD program for circuit schematic drawing and schematic capture.
 
 
 
 
 
'''xdx-2.4-2'''
 
DX cluster TCP/IP client for amateur radio
 
 
 
xdx is a client to connect to a DX-cluster. DX messages will be displayed in a list, announcements will go to a text display.
 
 
 
As well as the usual functions, if you have hamlib installed it can control the radio and set the frequency simply by double clicking a DX-spot (using rigctl).
 
 
 
 
 
'''xlog-1.7-3'''
 
Logging program for amateur radio operators
 
 
 
xlog is a logging program for amateur radio operators. The log is stored into a text file. QSO's are presented in a list. Items in the list can be added, deleted or updated. For each contact, DXCC information is displayed and bearings and distance is calculated, both short and long path. xlog supports trlog, adif, cabrillo, edit, twlog and editest files.
 
 
 
===See also===
 
Many amateur radio operators and electronics hobbyists also use embedded processors in their projects. See
 
[[Docs/Beats/Embedded]]
 

Latest revision as of 01:31, 20 September 2016

DocsProject Header docTeam1.png


Warning.png
Beat Closed on Wiki
Work on beats has now moved to git at https://pagure.io/fedora-docs/release-notes. If you have changes or additions, please contact the docs team via #fedora-docs, docs@lists.fedoraproject.org, or with the release-notes BZ component.