Test Day:2010-04-14 Radeon: Difference between revisions

Revision as of 17:21, 13 April 2010

DATE	TIME	WHERE
Wed Apr 14, 2010	ALL DAY	#fedora-test-day

What to test?

Today's instalment of Fedora Test Day will focus on the radeon driver for ATI/AMD Radeon graphics cards.

If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.

Who's available

The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion...

Development - Dave Airlie (airlied), Jerome Glisse (jglisse)
Quality Assurance - Adam Williamson (adamw)

What's needed to test

An ATI Radeon (or FireGL) graphics adapter. To confirm whether you have supporting hardware, run the following command:

/sbin/lspci -d 1002: | grep -iq VGA && echo "Join Radeon Fedora Test Day" || echo "Sorry, no Radeon graphics hardware found."

An updated Fedora 41 pre-release, or the special live image (see below)
Your hardware profile uploaded to Smolt according to these instructions

How to test?

Update your machine

If you're running Fedora 41, make sure you have all the current updates for it installed, using the update manager. If you have any problems running the test, please also install these updated builds from Koji and re-test before reporting a failure:

Or you can use a live image:

Live image

Optionally, you may download a non-destructive Fedora 41 live image for your architecture. Tips on using a live image are available at FedoraLiveCD.

Architecture	SHA256SUM
i686	bc0261eb4831dd38867d10ba74bbe3c1f67ed1e827757f6fe65b3bdc0bd0638b
x86_64	fa1de3c207f000ba6212b39692395e2af71a8e7322aac5cb4a92989c24decb33

Test

Follow each of these test cases:

QA:Testcase_radeon_basic
QA:Testcase_radeon_xvideo
QA:Testcase_radeon_rotate
QA:Testcase_radeon_restartx
QA:Testcase_radeon_dpms
QA:Testcase_radeon_glx (3D support for r600 and r700 cards - anything in the Radeon HD 2xxx, HD 3xxx, or HD 4xxx series - is quite experimental at this time, expect problems)
QA:Testcase_radeon_fastuserswitch
QA:Testcase_radeon_vt
QA:Testcase_radeon_suspend
QA:Testcase_radeon_rendercheck (requires 15 minutes)
QA:Testcase_radeon_compositing_manager

Multihead test case:

QA:Testcase_radeon_multihead

You will need two or more monitors to perform the multihead test.

Report your results

If you have problems with any of the tests, report a bug to Bugzilla usually for the component xorg-x11-drv-ati. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on this page to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Adam Williamson as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, if your system worked correctly, simply enter the word PASS. If you had trouble, enter the word FAIL, with a footnote indicator, and put a link to the bug report in the comments column (as in the example line). If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.

Results

User	Smolt Profile	Basic test	XVideo	Rotationt	X restart	DPMS	GLX	User switch	VT switch	Suspend	Rendercheck	Compositing	Multihead	Comments
Example user	HW	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	N/A	FAIL ^[1]	↑ See RHBZ #XXXXXX
Robert de Rooy	HW	PASS	PASS	Singlehead PASS Dualhead FAIL	PASS	PASS	Singlehead PASS Dualhead FAIL ^[1]	PASS	PASS	FAIL ^[2]		N/A	Multihead makes the desktop very slow. LVDS+VGA PASS LVDS+DVI PASS SVIDEO FAIL ^[3]	RV250 with 32MB VRAM ↑ See RHBZ #560048 ↑ See RHBZ #531825 ↑ See RHBZ #497055
Homer Xing	HW	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS		N/A	I have only one monitor :(	Radeon X1950GT
User	Smolt Profile	Basic test	XVideo	Rotationt	X restart	DPMS	GLX	User switch	VT switch	Suspend	Rendercheck	Compositing	Multihead	Comments

[1] See RHBZ #XXXXXX

[2] See RHBZ #560048

[3] See RHBZ #531825

[4] See RHBZ #497055

[1]

[1]

[2]

[3]

@@ Line 22: / Line 22: @@
 * An ATI Radeon (or FireGL) graphics adapter.  To confirm whether you have supporting hardware, run the following command: <pre>/sbin/lspci -d 1002: | grep -iq VGA && echo "Join Radeon Fedora Test Day" || echo "Sorry, no Radeon graphics hardware found."</pre>
-* An updated [http://fedoraproject.org/get-prerelease {{FedoraVersion|long|next}} pre-release], [[Releases/Rawhide|Rawhide]] (tips on installing Rawhide below), or a [http://alt.fedoraproject.org/pub/alt/nightly-composes/desktop/ nightly live image]
+* An updated [http://fedoraproject.org/get-prerelease {{FedoraVersion|long|next}} pre-release], or the special live image (see [[Test Day:2010-04-13_Nouveau#Live_image|below]])
 * Your hardware profile uploaded to [http://www.smolts.org Smolt] according to [http://smolts.org/smolt-wiki/Main_Page#Usage these instructions]
@@ Line 29: / Line 29: @@
 === '''Update your machine''' ===
-If you're running {{FedoraVersion|long|next}}, make sure you have all the current updates for it installed, using the update manager. If you want to try Rawhide, see the instructions on the [[Releases/Rawhide|Rawhide]] page on the various ways in which you can install or update to Rawhide. Or:
+If you're running {{FedoraVersion|long|next}}, make sure you have all the current updates for it installed, using the update manager. If you have any problems running the test, please also install these updated builds from [http://koji.fedoraproject.org Koji] and re-test before reporting a failure:
+# [http://koji.fedoraproject.org/koji/buildinfo?buildID=166715 kernel]
+# [http://koji.fedoraproject.org/koji/buildinfo?buildID=166505 mesa]
+# [http://koji.fedoraproject.org/koji/buildinfo?buildID=161839 xorg-x11-drv-nouveau]
+Or you can use a live image:
 === '''Live image''' ===
-Optionally, you may download a non-destructive {{FedoraVersion|long|next}} live image for your architecture. Tips on using a live image are available at [[FedoraLiveCD]]. Live images can be found [http://alt.fedoraproject.org/pub/alt/nightly-composes/desktop/ here].
+Optionally, you may download a non-destructive {{FedoraVersion|long|next}} live image for your architecture. Tips on using a live image are available at [[FedoraLiveCD]].
+{|
+! Architecture !! SHA256SUM
+<!--|-
+| [http://kparal.fedorapeople.org/testdays/2010-04-13_Nouveau/gfx_test_week_20100412_i686.iso i686] || 07ceede2b55909d827b20343b3fde0f52cfcfbabe109a8b89d613c8f537735e5
+-->
+|-
+| [http://jlaska.fedorapeople.org/2010-04-13-nouveau-testday/livecd-i386-nouveau-200502020230.iso i686] || bc0261eb4831dd38867d10ba74bbe3c1f67ed1e827757f6fe65b3bdc0bd0638b
+|-
+| [http://adamwill.fedorapeople.org/gfx_test_week_20100412/gfx_test_week_20100412_x86-64.iso x86_64] || fa1de3c207f000ba6212b39692395e2af71a8e7322aac5cb4a92989c24decb33
+|-
+|}
 === Test ===
@@ Line 49: / Line 67: @@
 * [[QA:Testcase_radeon_suspend]]
 * [[QA:Testcase_radeon_rendercheck]] (requires 15 minutes)
+* [[QA:Testcase_radeon_compositing_manager]]
 Multihead test case:
@@ Line 55: / Line 74: @@
 You will need two or more monitors to perform the multihead test.
-* [[QA:Testcase_radeon_compositing_manager]]
 === Report your results ===
-If you have problems with any of the tests, report a bug to [https://bugzilla.redhat.com Bugzilla] usually for the component [https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&version=rawhide&component=xorg-x11-drv-ati xorg-x11-drv-ati]. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on [[Xorg/Debugging|this page]] to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Adam Williamson as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, if your system worked correctly, simply enter the word '''PASS'''. If you had trouble, enter the word '''FAIL''', with a footnote indicator, and put a link to the bug report in the comments column (as in the example line). If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word '''N/A'''. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command <tt>lspci -nn</tt>.
+If you have problems with any of the tests, report a bug to [https://bugzilla.redhat.com Bugzilla] usually for the component [https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&version=13&component=xorg-x11-drv-ati xorg-x11-drv-ati]. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Follow the instructions on [[Xorg/Debugging|this page]] to ensure you include sufficient information in the report. Once you have completed the tests, add your results to the Results table below, following the example results from Adam Williamson as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, if your system worked correctly, simply enter the word '''PASS'''. If you had trouble, enter the word '''FAIL''', with a footnote indicator, and put a link to the bug report in the comments column (as in the example line). If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word '''N/A'''. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command <tt>lspci -nn</tt>.
 == Results ==
@@ Line 66: / Line 84: @@
 ! Smolt Profile
 ! [[QA:Testcase_radeon_basic|Basic test]]
-! [[QA:Testcase_radeon_xvideo|XVideo test]]
+! [[QA:Testcase_radeon_xvideo|XVideo]]
-! [[QA:Testcase_radeon_rotate|Rotation test]]
+! [[QA:Testcase_radeon_rotate|Rotationt]]
-! [[QA:Testcase_radeon_restartx|X restart test]]
+! [[QA:Testcase_radeon_restartx|X restart]]
-! [[QA:Testcase_radeon_dpms|DPMS test]]
+! [[QA:Testcase_radeon_dpms|DPMS]]
-! [[QA:Testcase_radeon_glx|GLX test]]
+! [[QA:Testcase_radeon_glx|GLX]]
-! [[QA:Testcase_radeon_fastuserswitch|User switch test]]
+! [[QA:Testcase_radeon_fastuserswitch|User switch]]
-! [[QA:Testcase_radeon_vt|VT switch test]]
+! [[QA:Testcase_radeon_vt|VT switch]]
-! [[QA:Testcase_radeon_suspend|Suspend test]]
+! [[QA:Testcase_radeon_suspend|Suspend]]
-! [[QA:Testcase_radeon_rendercheck|Rendercheck test]]
+! [[QA:Testcase_radeon_rendercheck|Rendercheck]]
-! [[QA:Testcase_radeon_multihead|Multihead test]]
+! [[QA:Testcase_radeon_compositing_manager|Compositing]]
+! [[QA:Testcase_radeon_multihead|Multihead]]
 ! Comments
 |-
@@ Line 92: / Line 111: @@
 | FAIL <ref>See {{bz|XXXXXX}}</ref>
 | <references/>
-|-
-! User
-! Smolt Profile
-! [[QA:Testcase_radeon_basic|Basic test]]
-! [[QA:Testcase_radeon_xvideo|XVideo test]]
-! [[QA:Testcase_radeon_rotate|Rotation test]]
-! [[QA:Testcase_radeon_restartx|X restart test]]
-! [[QA:Testcase_radeon_dpms|DPMS test]]
-! [[QA:Testcase_radeon_glx|GLX test]]
-! [[QA:Testcase_radeon_fastuserswitch|User switch test]]
-! [[QA:Testcase_radeon_vt|VT switch test]]
-! [[QA:Testcase_radeon_suspend|Suspend test]]
-! [[QA:Testcase_radeon_rendercheck|Rendercheck test]]
-! [[QA:Testcase_radeon_multihead|Multihead test]]
-! Comments
 |-
 | Robert de Rooy
@@ Line 119: / Line 123: @@
 | PASS
 | FAIL <ref>See {{bz|531825}}</ref>
+|
 | N/A
 | Multihead makes the desktop very slow.<br>LVDS+VGA PASS<br>LVDS+DVI PASS<br>SVIDEO FAIL <ref>See {{bz|497055}}</ref>
@@ Line 134: / Line 139: @@
 | PASS
 | PASS
+|
 | N/A
 | I have only one monitor :(
 | Radeon X1950GT
 |-
+! User
+! Smolt Profile
+! [[QA:Testcase_radeon_basic|Basic test]]
+! [[QA:Testcase_radeon_xvideo|XVideo]]
+! [[QA:Testcase_radeon_rotate|Rotationt]]
+! [[QA:Testcase_radeon_restartx|X restart]]
+! [[QA:Testcase_radeon_dpms|DPMS]]
+! [[QA:Testcase_radeon_glx|GLX]]
+! [[QA:Testcase_radeon_fastuserswitch|User switch]]
+! [[QA:Testcase_radeon_vt|VT switch]]
+! [[QA:Testcase_radeon_suspend|Suspend]]
+! [[QA:Testcase_radeon_rendercheck|Rendercheck]]
+! [[QA:Testcase_radeon_compositing_manager|Compositing]]
+! [[QA:Testcase_radeon_multihead|Multihead]]
+! Comments
 |}
 [[Category:Fedora 13 Test Days]]

Search